添加根据用户权限控制主界面功能

ZengTao

2023-12-07 3045d2e0ff01c40d836ae3b64ff15e71563e4ab4

 springboot-vue3/src/main/java/com/example/springboot/service/SpianService.java

@@ -22,8 +22,6 @@
    private SpianMapper spianMapper;

    // @GetMapping("/all")
    // 进片任务,传订单id
    // 按订单优先进片
    public Short selectAll(String glassid) {

        int cage1;
@@ -45,8 +43,10 @@
        List<String> adddresslist = new ArrayList<>();
        adddresslist.add("DB105.0");// 进片车起始位置
        adddresslist.add("DB105.2");// 进片车目标位置
        adddresslist.add("DB105.4");// 进片笼玻璃数
        adddresslist.add("DB105.12");// 进片车启动 1为启动
        adddresslist.add("DB105.4");// 进片玻璃宽 
        adddresslist.add("DB105.8");//进片笼内已有玻璃数
        adddresslist.add("DB105.16");// 进片车启动 1为启动
        
        List<Short> datas = new ArrayList<>();

        // String orderid="A001";
@@ -79,30 +79,34 @@
                widths = glasslist.getglasslengthmm();

                // 执行进片
                datas.add((short) 1000);
                datas.add((short) prcid);
                datas.add((short) prctier);
                datas.add((short) 1); 
                datas.add((short) 1000);//起始位置
                datas.add((short) prcid);//目标位置
                datas.add((short) widths);//进片玻璃宽
                datas.add((short) prctier); //玻璃数
                datas.add((short) 1);//任务启动
                //获取该格子内是否有玻璃
                int cellint=spianMapper.selectcell(cage1,cells);
                if(cellint==1){
                    //将外片玻璃的数据更新到内片
                    spianMapper.UpdateDBCage(ids, cage1, cells,1);
                    //将新入的玻璃存入外片
                    spianMapper.UpdataAddCage(orderids.toString(), glassid, widths, cage1, cells, ids-1, 2);
                    //spianMapper.UpdataAddCage(orderids, glassid, widths, cage1, cells, ids-1, 2);
                    spianMapper.UpdataAddCage2(orderids, glassid, glasslist, cage1,cells, ids-1, 2);
                    spianMapper.UpdataAddCage1(widths, cage1, cells);// 减少格子宽度
                    spianMapper.Inserttask(0, 0, 1000, ids, glassid.toString());// 新增任务
                    S7control.getinstance().WriteWord(adddresslist, datas);
                   
                }else{
                 // 数据库修改笼子表新增一条玻璃
                spianMapper.UpdataAddCage(orderids.toString(), glassid, widths, cage1, cells, ids, 2);
                //spianMapper.UpdataAddCage(orderids, glassid, widths, cage1, cells, ids, 2);
                spianMapper.UpdataAddCage2(orderids, glassid, glasslist, cage1,cells, ids, 2);
                spianMapper.UpdataAddCage1(widths, cage1, cells);// 减少格子宽度
                spianMapper.Inserttask(0, 0, 1000, ids, glassid.toString());// 新增任务
                S7control.getinstance().WriteWord(adddresslist, datas);

                // S7control.getinstance().WriteByte("DB105.16",glassid);
                }
              
                outmesid(glassid,"DB105.20");
                return (200);

            }
@@ -154,12 +158,13 @@
                    ids = cages1.getId();// 数据库ID
                    cells = cages1.getCell();// 格子号
                    prcid = cages1.getPrcId();// 传给prc的目标地id
                    String glassid="";
                    // 数据库修改笼子表新增一条玻璃
                    for (int i = 2; i > 0; i--) {
                        north_glass_buffer1 qglass = spianMapper.SelectQueueGlass(i);
                        width = qglass.getglasslengthmm();// 格子剩余宽度
                        spianMapper.UpdataAddqueCage(qglass.getordernumber(), qglass.getbarcode(), width, cage1, cells, i,
                                1);
                        glassid=qglass.getbarcode();
                        spianMapper.UpdataAddqueCage(qglass.getordernumber(), qglass.getbarcode(), width, cage1, cells, i,1);
                        spianMapper.UpdataAddCage1(width, cage1, cells);// 减少格子宽度
                        spianMapper.Inserttask(0, 0, 1000, ids, qglass.getbarcode().toString());// 新增任务
                    }
@@ -169,7 +174,7 @@
                    datas.add((short) 0);
                    datas.add((short) 1);
                    S7control.getinstance().WriteWord(adddresslist, datas);

                    outmesid(glassid,"DB105.20");
                    return (200);

                }
@@ -217,6 +222,7 @@
                        spianMapper.UpdataAddCage(orderid, glassid, widths, cage1, cells, ids, 2);
                        spianMapper.UpdataAddCage1(widths, cage1, cells);// 减少格子宽度
                        spianMapper.Inserttask(0, 0, 1000, ids, glassid.toString());// 新增任务
                        outmesid(glassid,"DB105.20");//派发进片id
                        // S7control.getinstance().WriteWord(adddresslist, datas);
                        break;
                        // S7control.getinstance().WriteByte("DB105.16",glassid);
@@ -238,10 +244,10 @@
        // spianMapper.UpdatetaskOut(); //完成上一次出片或者调度任务，改到plchold里，出片或调度任务完成立即改变结束任务；
        // 定义PRC数据传送数组
        List<String> adddresslist = new ArrayList<>();
        adddresslist.add("DB105.6");// 出片车起始位置
        adddresslist.add("DB105.8");// 出片车目标位置
        adddresslist.add("DB105.10");// 出片笼玻璃数
        adddresslist.add("DB105.14");// 出片车启动 1为启动
        adddresslist.add("DB105.10");// 出片车起始位置
        adddresslist.add("DB105.12");// 出片车目标位置
        adddresslist.add("DB105.14");// 出片笼玻璃数
        adddresslist.add("DB105.18");// 出片车启动 1为启动
        List<Short> datas = new ArrayList<>();
        // 获取优先出片的位置
        StorageCage cageout = spianMapper.selectOut(orderid);
@@ -285,10 +291,10 @@
                datas.add((short) 1);

                spianMapper.UpdataOutCage1(glasswidth, cage, cell);// 增加原格子宽度
                spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, tier, 3);// 清除格子玻璃信息
                spianMapper.UpdataGlassCageState(glassid,3);//更改笼子表的玻璃状态
                spianMapper.Inserttask(1, 0, cageout.getId(), 1000, orderid);// 新增任务
                S7control.getinstance().WriteWord(adddresslist, datas);// 派发出片车任务
                outmesid(glassid);// 派发出片ID
                outmesid(glassid,"DB105.34");// 派发出片ID
                if (pd != null) {
                    cage = pd.getCage();
                    cell = pd.getCage();
@@ -309,7 +315,7 @@
                    datas.add((short) 1);
                    spianMapper.Inserttask(1, 0,prcid, 1000, orderid);// 新增任务
                    spianMapper.UpdataOutCage1(glasswidth, cage, cell);// 增加原格子宽度
                    spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, tier, 0);// 清除格子玻璃信息
                    spianMapper.UpdataGlassCageState(glassid,3);//更改笼子表的玻璃状态
                    //S7control.getinstance().WriteWord(adddresslist, datas);// 派发出片车任务
                    //outmesid(glassid);// 派发出片ID
                    if (pd != null) {
@@ -344,12 +350,12 @@
                        spianMapper.UpdateDBCage(ids, cage, cell,2);// 将原格子数据更新到新格子里
                        spianMapper.UpdataAddCage1(glasswidth, cages, cells);// 减少新格子宽度
                        spianMapper.UpdataOutCage1(glasswidth, cage, cell);// 增加原格子宽度
                        spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, 2, 3);// 清除被调拨格子数据
                        spianMapper.UpdataGlassCageState(glassid,3);//更改笼子表的玻璃状态
                        spianMapper.Inserttask(2, 0, cageout.getId(), ids, orderid);// 新增调度任务
                        // 传输mes数据,坐标，数据
                        S7control.getinstance().WriteWord(adddresslist, datas);// 派发出片车任务
                        System.out.println(datas);
                        outmesid(glassids);// 派发调拨玻璃ID
                        outmesid(glassids,"DB105.34");// 派发调拨玻璃ID
                        return Result.success(cagecell); // 结束

                    } else {// 笼子号大于5时
@@ -372,11 +378,11 @@
                        spianMapper.Inserttask(2, 0, cageout.getId(), ids, orderid);// 新增调度任务
                        spianMapper.UpdataAddCage1(glasswidth, cages, cells);// 减少新格子宽度
                        spianMapper.UpdataOutCage1(glasswidth, cage, cell);// 增加原格子宽度
                        spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, 2, 3);// 清除被调拨格子数据
                        spianMapper.UpdataGlassCageState(glassid,3);//更改笼子表的玻璃状态
                        // 传输mes数据,坐标，数据
                        S7control.getinstance().WriteWord(adddresslist, datas);// 派发出片车任务

                        outmesid(glassids);// 派发调拨玻璃ID
                        outmesid(glassids,"DB105.34");// 派发调拨玻璃ID
                        return Result.success(cagecell); // 结束

                    }
@@ -389,13 +395,14 @@

    
    public Short selectout2(String glassid) {
        // spianMapper.UpdatetaskOut(); //完成上一次出片或者调度任务,改到plchold里，出片或调度任务完成立即改变结束任务；
        // 定义PRC数据传送数组
        List<String> adddresslist = new ArrayList<>();
        adddresslist.add("DB105.6");// 出片车起始位置
        adddresslist.add("DB105.8");// 出片车目标位置
        adddresslist.add("DB105.10");// 出片笼玻璃数
        adddresslist.add("DB105.14");// 出片车启动 1为启动
        char[] a=glassid.toCharArray();

        adddresslist.add("DB105.10");// 出片车起始位置
        adddresslist.add("DB105.12");// 出片车目标位置
        adddresslist.add("DB105.14");// 出片笼玻璃数
        adddresslist.add("DB105.18");// 出片车启动 1为启动
        List<Short> datas = new ArrayList<>();
        // 获取优先出片的位置
        StorageCage cageout = spianMapper.selectOut2(glassid);
@@ -421,33 +428,37 @@
            datas.add((short) 1000);
            datas.add((short) state);
            datas.add((short) 1);

            spianMapper.OverOutSlice(glassid, 1);//更新出片队列任务状态为进行中
            spianMapper.UpdataOutCage1(glasswidth, cage, cell);// 增加原格子宽度
            spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, tier, 3);// 清除格子玻璃信息
            spianMapper.UpdataGlassCageState(glassid,3);//更改笼子表的玻璃状态
            
            spianMapper.Inserttask(1, 0, cageout.getId(), 1000, glassid);// 新增任务
            // int state = spianMapper.selectGlassState(cage, cell);//获取格子数量
            if (state == 2) {
                spianMapper.UpdateDBCage1(cage, cell);// 将内片数据更新到外片里
                spianMapper.UpdateDBCage2(cage, cell);// 清除内片数据
            }
            
            S7control.getinstance().WriteWord(adddresslist, datas);// 派发出片车任务
            outmesid(glassid);// 派发出片ID
            outmesid(glassid,"DB105.34");// 派发出片ID

            return (200);// 结束
        } else {
            // 获取格子的玻璃数量
            int state = spianMapper.selectGlassState(cage, cell);
            // 判断内片是否需要调拨
            if (state == 0) {
            if (state == 1) {
                // spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, tier, 3);
                datas.add((short) prcid);
                datas.add((short) 1000);
                datas.add((short) 1);
                datas.add((short) 1);
                spianMapper.OverOutSlice(glassid, 1);//更新出片队列任务状态为进行中
                spianMapper.Inserttask(1, 0, cageout.getId(), 1000, glassid);// 新增任务
                spianMapper.UpdataOutCage1(glasswidth, cage, cell);// 增加原格子宽度
                spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, tier, 3);// 清除格子玻璃信息
                outmesid(glassid);// 派发出片ID
                spianMapper.UpdataGlassCageState(glassid,3);//更改笼子表的玻璃状态
                spianMapper.OverOutSlice(glassid,2);//完成出片队列任务
                outmesid(glassid,"DB105.34");// 派发出片ID
                S7control.getinstance().WriteWord(adddresslist, datas);// 派发出片车任务

                return (200);// 结束
@@ -475,13 +486,13 @@
                    spianMapper.UpdateDBCage(ids, cage, cell,2);// 将原格子数据更新到新格子里
                    spianMapper.UpdataAddCage1(glasswidth, cages, cells);// 减少新格子宽度
                    spianMapper.UpdataOutCage1(glasswidth, cage, cell);// 增加原格子宽度
                    spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, 2, 3);// 清除被调拨格子数据
                    spianMapper.UpdataGlassCageState(glassids,3);//更改笼子表的玻璃状态
                    spianMapper.Inserttask(2, 0, cageout.getId(), ids, glassid);// 新增调度任务
                    spianMapper.Inserttask(1, 0, cageout.getId(), 1000, glassid);// 新增出片任务
                    //spianMapper.Inserttask(1, 0, cageout.getId(), 1000, glassid);// 新增出片任务
                    // 传输mes数据,坐标，数据
                    S7control.getinstance().WriteWord(adddresslist, datas);// 派发出片车任务

                    outmesid(glassids);// 派发调拨玻璃ID
                    outmesid(glassids,"DB105.34");// 派发调拨玻璃ID
                    return (200); // 结束

                } else {// 笼子号大于5时
@@ -501,15 +512,15 @@
                    datas.add((short) 1);
                    String glassids = spianMapper.SelectGlassid(cage, cell); // 获取被调拨的玻璃id
                    spianMapper.Inserttask(2, 0, cageout.getId() + 1, ids, glassid);// 新增调度任务
                    spianMapper.Inserttask(1, 0, cageout.getId(), 1000, glassid);// 新增出片任务
                    //spianMapper.Inserttask(1, 0, cageout.getId(), 1000, glassid);// 新增出片任务
                    spianMapper.UpdateDBCage(ids, cage, cell,2);// 将原格子数据更新到新格子里
                    spianMapper.UpdataAddCage1(glasswidth, cages, cells);// 减少新格子宽度
                    spianMapper.UpdataOutCage1(glasswidth, cage, cell);// 增加原格子宽度
                    spianMapper.UpdataGlassCage("", "", glasswidth, cage, cell, 2, 3);// 清除被调拨格子数据
                    spianMapper.UpdataGlassCageState(glassids,3);//更改笼子表的玻璃状态
                    // 传输mes数据,坐标，数据
                    S7control.getinstance().WriteWord(adddresslist, datas);// 派发出片车任务

                    outmesid(glassids);// 派发调拨玻璃ID
                    outmesid(glassids,"DB105.34");// 派发调拨玻璃ID
                    return (200);// 结束

                }
@@ -517,21 +528,22 @@
        }

    }
    //派发调拨任务玻璃id
    public void outmesid(String glassid) {
        System.out.println("outmesid:" + glassid);
    //派发任务玻璃id
    public void outmesid(String glassid,String address) {
        //System.out.println("outmesid:" + glassid);
        List<Byte> glassidlist = new ArrayList();
        for (char iditem : glassid.toCharArray()) {
            glassidlist.add(Byte.valueOf(String.valueOf(iditem)));
        char ds[]=glassid.toCharArray();
        for (char iditem : ds) {
            glassidlist.add((byte)iditem);
        }
        byte[] bytes = Bytes.toArray(glassidlist);
        System.out.println("outmesidbytes:" + bytes.length);
        S7control.getinstance().WriteByte("DB105.30", bytes);// 派发出片id
        S7control.getinstance().WriteByte(address, bytes);// 派发出片id
    }
    //获取地址内的玻璃id转字符串
    public StringBuilder queGlassid(String address) {
    public StringBuilder queGlassid(String address,int count) {
        StringBuilder writedstrIdOut = new StringBuilder();
        byte[] writedglassidbytesOut = S7control.getinstance().ReadByte(address, 13);
        byte[] writedglassidbytesOut = S7control.getinstance().ReadByte(address, count);
      if (writedglassidbytesOut != null) {
        // 获取玻璃id
        for (byte iditem : writedglassidbytesOut) {
@@ -550,4 +562,10 @@
        String s = new String(bytes, StandardCharsets.UTF_8);
        return s.toCharArray();
    }
    //判断集合里是否为1
    public  boolean listbool(String address) {
       List<Short> list = S7control.getinstance().ReadWord(address, 1);//返回为ture时为1
       boolean listbool = list.contains((short) 1);
        return listbool;
    }
}