CanadaMes.git - Gitblit

			@@ -1,4 +1,6 @@
			{

			"ip": "localhost",
			"systemTitle": "Login System",
			"usernamePlaceholder": "Please enter username",
			"passwordPlaceholder": "Please enter password",
			@@ -37,6 +39,9 @@
			"exit": "exit",
			"changePassword": "changePassword",
			"resetPassword": "resetPassword",
			"Old password":"Old password",
			"New password":"New password",
			"Confirm password":"Confirm password",
			"home": "Home",
			"role": "role",
			"langRoleManagement": "Role Management",
			@@ -109,6 +114,8 @@
			"有效": "Valid",
			"无效": "Invalid",
			"请输入名称": "Please enter a name",
			"请输入角色": "Please enter a role",
			"请输入权限描述":"Please enter a permission description",
			"长度在 2 到 15 个字符": "Length between 2 and 15 characters",
			"请输入状态": "Please enter the status",
			"添加角色": "Add Role",
			@@ -279,7 +286,7 @@
			"DataBase Connection failed":"DataBase Connection failed",
			"Distribute parameters":"Distribute parameters",
			"The glass size is not within the range":"The glass size is not within the range",
			"Increase":"Increase",
			"Add":"Add",
			"Enable":"Enable",
			"Disable":"Disable",
			"Usage":"Usage",
			@@ -299,16 +306,251 @@
			"Confirm Modification":"Confirm modification",
			"The glass ID already exists in the loading queue":"The glass ID already exists in the loading queue",
			"This glass ID already exists in the sorting cage":"This glass ID already exists in the sorting cage",
			"Production queue":"Production queue",
			"Outing Queue":"Outing Queue",
			"Enter the Frame No":"Enter the Frame No",
			"Frame No":"Frame No",
			"Glass information corresponding to aluminum frame":"Glass information corresponding to aluminum frame",
			"In the cage":"In the cage",
			"Flip":"Flip",
			"Flipped":"Flipped",
			"In the queue":"In the queue",
			"Normal":"Normal",
			"Entering":"Entering",
			"Outing":"Outing",
			"Suspend":"Suspend"
			"Suspend":"Suspend",
			"Stop":"Stop",
			"Start":"Start",
			"Sequence":"Sequence",
			"Position":"Position",
			"Top":"Top",
			"Up":"Up",
			"Down":"Down",
			"Unable to find the placement method of the aluminum frame":"Unable to find the placement method of the aluminum frame",
			"Unable to find whether the aluminum frame is flipped or not":"Unable to find whether the aluminum frame is flipped or not",
			"You do not have this permission":"You do not have this permission",
			"This glass is already in the Queue":"This glass is already in the Queue",
			"Complete":"Complete",
			"Allow":"Allow",
			"Not Allow":"Not Allow",
			"Completed":"Completed",
			"Waiting":"Waiting",
			"Deleted":"Deleted",
			"Glass State":"Glass State",
			"Absent":"Absent",
			"Approximately resettable time":"Approximately resettable time",
			"EXTERIQR OUT AND BYPASS TO THE LEFT":"EXTERIQR OUT AND BYPASS TO THE LEFT",
			"EXTERIQR OUT AND BYPASS TO THE RIGHT":"EXTERIQR OUT AND BYPASS TO THE RIGHT",
			"Complete Task":"Complete Task",
			"Outed":"Outed",
			"Queue State":"Queue State",
			"Sorting State":"Sorting State",
			"Confirm State":"Confirm State",
			"ServoManualone": {
			"A01 所在格子": "A01 Current Grid",
			"数量": "Quantity",
			"进片ID": "IncomingId",
			"长度": "Length",
			"高度": "Height",
			"取片格子": "Pickupgrid address",
			"存片格子": "Storagegrid address",
			"A01翻转实时位置": "A01FlipPosition",
			"A02翻转实时位置": "A02FlipPosition",
			"故障": "Fault",
			"复位": "Reset",
			"未回零": "NotZero",
			"回零": "Home",
			"目标格子": "Target Grid",
			"A02 所在格子": "A02 Current Grid",
			"取片ID": "PickupId",
			"A01半自动": "A01 Semi-Auto",
			"A01半自动启动": "A01 Semi-Auto Start",
			"A02半自动": "A02 Semi-Auto",
			"A02半自动启动": "A02 Semi-Auto Start",
			"B01 所在格子": "B01 Current Grid",
			"B02 所在格子": "B02 Current Grid"

			},
			"langParameter1": {


			},

			"langParameter2": {
			"D01手动状态": "D01 Manual Status",
			"清除ID": "Clear ID",
			"ID": "ID",
			"A02ID": "A02ID",
			"B01ID": "B01ID",
			"B02ID": "B02ID",
			"D02手动状态": "D02 Manual Status",
			"D03手动状态": "D03 Manual Status",
			"D04手动状态": "D04 Manual Status",
			"D05手动状态": "D05 Manual Status",
			"D06手动状态": "D06 Manual Status",
			"A01手动状态": "A01 Manual Status",
			"ID1": "ID1",
			"ID2": "ID2",
			"A02手动状态": "A02 Manual Status",
			"B01手动状态": "B01 Manual Status",
			"B02手动状态": "B02 Manual Status",
			"扫描枪扫码的ID": "Scanned ID",
			"A01当前格子": "A01 Current Grid",
			"A02所在格子": "A02 Current Grid",
			"B01所在格子": "B01 Current Grid",
			"B02所在格子": "B02 Current Grid",
			"急停后中止/继续选择": "Abort/ResumeTasks",
			"A01终止/继续": "A01Abort/ResumeTasks",
			"A02终止/继续": "A02Abort/ResumeTasks",
			"存片等待延时": "Storage wait delay"

			},
			"langPositioning1": {
			"格子间距": "GridSpacing",
			"存片接片地址": "StorageReceivingAddress",
			"出片接片地址": "OutgoingReceivingAddress",
			"存片格位置设定": "StorageGridPositionSetting",
			"1#格地址": "grid address1# ",
			"22#格地址": "grid address22#",
			"43#格地址": "grid address43#",
			"64#格地址": "grid address64#",
			"85#格地址": "grid address85#",
			"106#格地址": "grid address106#",
			"127#格地址": "grid address127#",
			"148#格地址": "grid address148#",
			"169#格地址": "grid address169#",
			"190#格地址": "grid address190#",
			"出片格位置设定": "OutgoingGridPositionSetting",
			"A01所在格子": "A01 grid address",
			"数量": "Quantity",
			"进片ID": "IncomingId",
			"长度": "Length",
			"高度": "Height",
			"取片格子": "Pickupgrid address",
			"翻转实时位置": "FlipPosition",
			"故障": "Fault",
			"复位": "Reset",
			"未回零": "NotZero",
			"回零": "Zero",
			"目标格子": "Target Grid",
			"格子间距": "GridSpacing",
			"存片接片地址": "StorageReceivingAddress",
			"出片接片地址": "OutgoingReceivingAddress",
			"存片格位置设定": "StorageGridPositionSetting",
			"1#格地址": "grid address1# ",
			"22#格地址": "grid address22#",
			"43#格地址": "grid address43#",
			"64#格地址": "grid address64#",
			"85#格地址": "grid address85#",
			"106#格地址": "grid address106#",
			"127#格地址": "grid address127#",
			"148#格地址": "grid address148#",
			"169#格地址": "grid address169#",
			"190#格地址": "grid address190#",
			"出片格位置设定": "OutgoingGridPositionSetting",
			"B01格位置设定":"B01PositionSetting",
			"B02位置设定":"B02PositionSetting"
			},
			"langPositioning2": {

			}, "ManualonePositionlang": {
			"A01手动格子": "A01 Target grid(Manual)",
			"A01定位速度": "A01 TRAVEL POS Velocity manual",
			"A01当前格子": "A01 Current Grid",
			"A01启动": "A01 Start",
			"故障": "Fault",
			"复位": "Reset",
			"A02手动格子": "A02 Target grid(Manual)",
			"A02定位速度": "A02 TRAVEL POS Velocity manual",
			"A02当前格子": "A02 Current Grid",
			"A02启动": "A02 Start",
			"复位": "Reset",
			"B01手动格子": "B01 Target grid(Manual)",
			"B01定位速度": "B01 TRAVEL POS Velocity manual",
			"B01当前格子": "B01 Current Grid",
			"B01启动": "B01 Start",
			"复位": "Reset",
			"回零": "Home",
			"未回零": "NotZero",
			"B02手动格子": "B02 Target grid(Manual)",
			"B02定位速度": "B02 TRAVEL POS Velocity manual",
			"B02当前格子": "B02 Current Grid",
			"B02启动": "B02 Start",
			"复位": "Reset",
			"A01实时位置": "A01 tavel Actual Position",
			"A02实时位置": "A02 tavel Actual Position",
			"B01实时位置": "B02 tavel Actual Position",
			"B02实时位置": "B02 tavel Actual Position"
			},
			"Manualoneposition2lang": {
			"A01手动位置": "A01 turn Target Angle(Manual)",
			"A01定位速度": "A01 TURN POS Velocity manual",
			"A01翻转实时位置": "A01 turn Actual angle",
			"A01翻转启动": "A01 SERVE TURN",
			"故障": "Fault",
			"复位": "Reset",
			"未回零": "NotZero",
			"回零": "Home",
			"A02手动位置": "A02 turn Target Angle(Manual)",
			"A02定位速度": "A02 TURN POS Velocity manual",
			"A02翻转实时位置": "A02 turn Actual angle",
			"A02翻转启动": "A02 SERVE TURN",
			"A02复位": "Reset"


			},
			"AutomaticParameterSettinglang": {
			"A01行走高速角度": "A01 turn Angle1",
			"A01行走低速角度": "A01 turn Angle2",
			"A01输送接片角度": "A01 turn Angle3",
			"A01笼子角度": "A01 turn Angle4",
			"A02行走高速角度": "A02 turn Angle1",
			"A02行走低速角度": "A02 turn Angle2",
			"A02输送接片角度": "A02 turn Angle3",
			"A02笼子角度": "A02 turn Angle4",
			"大车自动速度": "A01 A02 TRAVEL POS Velocity AUTO",
			"小车自动速度": "B01 B02 TRAVEL POS Velocity AUTO",
			"自动翻转速度": "A01 A02 TURN POS Velocity AUTO",
			"A01~A02输送": "A01~A02 Conveying",
			"B01~B02输送": "B01~B02 Conveying",
			"D01~D06输送": "D01~D06 Conveying",
			"翻转点动速度": "Flip Jog Speed",
			"小车点动速度": "Cart Jog Speed",
			"最高速度": "Max Speed",
			"高速线速度": "High-Speed Line Speed",
			"低速线速度": "Low-Speed Line Speed",
			"手动速度": "Manual Speed"
			},
			"ManualJoglang": {
			"D01输送": "D01 VFD conveyor",
			"D02输送": "D02 VFD conveyor",
			"D03输送": "D03 VFD conveyor",
			"D04输送": "D04 VFD conveyor",
			"D05输送": "D05 VFD conveyor",
			"D06输送": "D06 VFD conveyor",
			"A01输送正向": "A01 VFD conveyor",
			"A02输送正向": "A02 VFD conveyor",
			"B01输送": "B01 VFD conveyor",
			"B02输送": "B02 VFD conveyor",
			"A01翻转": "A01 SERVE TURN",
			"A02翻转": "A02 SERVE TURN",
			"A01行走点动": "A01 SERVE TRAVEL",
			"A02行走点动": "A02 SERVE TRAVEL",
			"B01行走点动": "B01 SERVE TRAVEL",
			"B02行走点动": "B02 SERVE TRAVEL",
			"B02翻转气缸": "B02 Solenoid TURN",
			"B02升降气缸": "B02 Solenoid UP DOWN",
			"B02吹气": "B02 Solenoid Gassing",
			"B01翻转气缸": "B01 Solenoid TURN",
			"B01升降气缸": "B01 Solenoid UP DOWN",
			"B01吹气": "B01 Solenoid Gassing",
			"A01输送反向": "A01 VFD conveyor reverse",
			"A02输送反向": "A02 VFD conveyor reverse",
			"A01注电泵": "A01 oil pump",
			"A02注电泵": "A02 oil pump",
			"A01行走伺服回零":"A01 SERVE TRAVEL Home",
			"A02行走伺服回零":"A02 SERVE TRAVEL Home"
			},
			"A01行走伺服回零":"A01 SERVE TRAVEL Home",
			"A02行走伺服回零":"A02 SERVE TRAVEL Home"


			}