CanadaMes.git - Gitblit

			@@ -2,9 +2,13 @@

			import cn.hutool.json.JSONArray;
			import cn.hutool.json.JSONObject;
			import lombok.extern.slf4j.Slf4j;

			import com.example.springboot.controller.HomeController;
			import com.example.springboot.mapper.HomeMapper;
			import org.apache.commons.io.FileUtils;
			import org.springframework.beans.factory.annotation.Autowired;
			import com.example.springboot.service.StorageCageService;

			import java.io.*;
			import java.util.ArrayList;
			@@ -12,19 +16,14 @@
			import java.util.Collections;
			import java.util.List;






			@Slf4j
			public class PlcParameter2 extends Thread {

			// 用于存储应用程序的配置信息
			private Configuration config;

			@Autowired
			StorageCageService storageCageService;
			// 创建一个自定义的 S7 控制器消息处理器对象
			MessageHandler customS7Control = new MessageHandler();

			// 用于存储应用程序的配置信息
			private Configuration config;

			public PlcParameter2() throws IOException {
			config = new Configuration("config.properties");
			@@ -35,260 +34,253 @@
			while (this != null) {
			try {
			Thread.sleep(1000);
			storageCageService = WebSocketServer.applicationContext.getBean(StorageCageService.class);
			// id
			List<String> addressList1 = Arrays.asList(config.getProperty("Parameter2.id").split(","));
			List<String> paramlist = S7control.getinstance().readStrings(addressList1);
			// System.out.println(paramlist);
			// 手动状态
			List<String> addresses = Arrays.asList(config.getProperty("Parameter2.state").split(","));
			List<Short> data = S7control.getinstance().readWords(addresses);
			// 清除id
			List<String> addressList0 = Arrays.asList(config.getProperty("Parameter2.cleanid").split(","));
			// 扫码枪
			List<Boolean> data2 = S7control.getinstance().readBits(addressList0);
			List<String> addressList3 = Arrays.asList(config.getProperty("Parameter2.scanner").split(","));

			// 急停按钮
			List<String> niuanaddressList3 = Arrays.asList(config.getProperty("Parameter2.stop").split(","));
			List<String> timeout = Arrays.asList(config.getProperty("Parameter2.timeout").split(","));
			String timeout2 = config.getProperty("Parameter2.timeout");

			Long readtimeout = S7control.getinstance().readtime(timeout2);
			List<Boolean> anniuread = S7control.getinstance().readBits(niuanaddressList3);
			List<String> data3 = S7control.getinstance().readStrings(addressList3);
			// A01 A02 B01 B02
			List<String> addresses4 = Arrays.asList(config.getProperty("Parameter2.Currentcell").split(","));
			List<Short> data4 = S7control.getinstance().readWords(addresses4);
			// System.out.println(data);
			// List<Long> TIME2 =
			// Collections.singletonList(S7control.getinstance().readtime("DB100.194"));
			// System.out.println("addressList：" + TIME2);

			//

			//
			// String[] values6 = { ".x1 ","x2
			// ","x3",";;x4","x5","x6","x7","x8","x9","x10","x11"};
			// List<String> paramlist = new ArrayList<>(Arrays.asList(values6));
			// Short[] values1 = { 0, 1, 1, 1, 1, 1, 1, 1, 1, 1};
			// List<Short> data = new ArrayList<>(Arrays.asList(values1));
			// Boolean[] value4 = { false, false, false, false, false, false, false, false,
			// false,
			// false};
			// List<Boolean> data2 = new ArrayList<>(Arrays.asList(value4));
			// String[] values3 = { ".x11 ","x21 "};
			// List<String> data3 = new ArrayList<>(Arrays.asList(values3));
			// Short[] values4 = { 2,2,3,4};
			// List<Short> data4 = new ArrayList<>(Arrays.asList(values4));
			//
			//
			// JSONObject jsonObject = new JSONObject();
			// short[] params = new short[data2.size()];
			// for (int i = 0; i < data2.size(); i++) {
			// boolean value = data2.get(i);
			// params[i] = value ? (short) 1 : (short) 0;
			// }
			////
			// short[] anniuparams = new short[anniuread.size()];
			// for (int i = 0; i < anniuread.size(); i++) {
			// boolean value = anniuread.get(i);
			// anniuparams[i] = value ? (short) 1 : (short) 0;
			// }
			// boolean转为0 1
			short[] params = customS7Control.convertBooleanListToShortArray(data2);
			short[] anniuparams = customS7Control.convertBooleanListToShortArray(anniuread);
			JSONObject jsonObject = new JSONObject();
			jsonObject.append("params", params);
			jsonObject.append("params", paramlist);
			jsonObject.append("params", data);
			jsonObject.append("params", data3);
			jsonObject.append("params", data4);
			jsonObject.append("jiting", anniuparams);
			jsonObject.append("timeout", readtimeout);

			// WebSocketServer sendwServer =
			// WebSocketServer.getWebSocketServer("Parameter2");
			// if (sendwServer != null) {
			// JSONObject jsonObject = new JSONObject();
			// jsonObject.set("message", "Hello, Parameter2!");
			// sendwServer.sendMessage(jsonObject.toString());
			// }
			// HomeController controller = new HomeController();
			ArrayList<WebSocketServer> sendwServer = WebSocketServer.sessionMap.get("Parameter2");
			if (sendwServer != null) {
			for (WebSocketServer webserver : sendwServer) {



			if (webserver != null&&webserver.session.isOpen()) {
			webserver.sendMessage(jsonObject.toString());
			List<String> messages = webserver.getMessages();

			if (!messages.isEmpty()) {
			// 将最后一个消息转换为整数类型的列表
			String lastMessage = messages.get(messages.size() - 1);
			// System.out.println("lastMessage：" + lastMessage);
			JSONArray messageArray = new JSONArray(lastMessage);
			// 清除ID
			// customS7Control.writeBitToPLC(messageArray, addressList0, 0);

			try {
			// 检查索引是否有效
			if (messageArray.getJSONArray(0).size() > 0) {
			// 获取消息数组
			JSONArray jsonArray = messageArray.getJSONArray(0);
			// 创建一个布尔值列表
			List<Boolean> sValue = new ArrayList<>();
			// 遍历消息数组
			for (int i = 0; i < jsonArray.size(); i++) {
			// 获取消息数组中的值
			Object value = jsonArray.get(i);
			// 检查值是否有效
			if (value != null && !value.toString().equals("null")) {
			try {
			// 移除非数字和数字字符
			String cleanedValue = value.toString().replaceAll("[^0-9-]", "");
			// 解析为布尔值
			boolean val = "1".equals(cleanedValue.trim());
			// 将布尔值添加到布尔值列表中
			sValue.add(val);
			System.out.println(
			"messageValue: " + Arrays.asList(val)
			+ " added to the list");

			} catch (NumberFormatException e) {
			// 如果无法解析为 boolean 类型，则忽略该部分
			System.err.println("Could not parse value: " + value);
			}
			}
			}
			// 完成出片
			boolean containsOne = data.stream().anyMatch(number -> number == 1);
			for (int i = 1; i <= 5; i++) {
			boolean value = sValue.get(i);
			String id = paramlist.get(i);
			// 判断是否自动状态
			if (!containsOne) {
			// 判断id是否包含数字
			if (id.matches(".\\d.")) {
			// 判断清除id是否true
			if (value) {
			System.out.println(id);
			switch (i) {
			case 1:
			storageCageService.UpdateTask(2, 0, paramlist.get(i));
			break;
			case 2:
			case 3:
			case 4:
			case 5:
			storageCageService.UpdateTask(3, 0, paramlist.get(i));
			break;
			default:
			// 处理索引值不在范围内的情况
			break;
			}
			}
			}

			// 检查布尔值列表是否为空
			if (!sValue.isEmpty()) {

			// 调用 S7control.getinstance().WriteBit 方法将布尔值列表写入地址列表
			S7control.getinstance().WriteBit(addressList0, sValue);
			System.out
			.println("Values " + sValue + " written to PLC at address "
			+ addressList0);
			}
			}
			}
			}
			} catch (Exception e) {
			System.err.println("An error occurred while writing bit to PLC: " + e.getMessage());
			}

			// 急停
			// customS7Control.writeBitToPLC(messageArray, niuanaddressList3, 1);

			try {
			// 检查索引是否有效
			if (messageArray.getJSONArray(1).size() > 0) {
			// 获取消息数组
			JSONArray jsonArray = messageArray.getJSONArray(1);
			// 创建一个布尔值列表
			List<Boolean> sValue = new ArrayList<>();
			// 遍历消息数组
			for (int i = 0; i < jsonArray.size(); i++) {
			// 获取消息数组中的值
			Object value = jsonArray.get(i);
			// 检查值是否有效
			if (value != null && !value.toString().equals("null")) {
			try {
			// 移除非数字和数字字符
			String cleanedValue = value.toString().replaceAll("[^0-9-]", "");
			// 解析为布尔值
			boolean val = "1".equals(cleanedValue.trim());
			// 将布尔值添加到布尔值列表中
			sValue.add(val);
			System.out.println(
			"messageValue: " + Arrays.asList(val)
			+ " added to the list");

			} catch (NumberFormatException e) {
			// 如果无法解析为 boolean 类型，则忽略该部分
			System.err.println("Could not parse value: " + value);
			}
			}
			}
			// 终止进片任务
			boolean Value1 = sValue.get(0);
			boolean Value2 = sValue.get(1);

			if (Value1) {
			storageCageService.EndTask(0);

			}
			if (Value2) {
			storageCageService.EndTask(1);

			}
			// 检查布尔值列表是否为空
			if (!sValue.isEmpty()) {

			// 调用 S7control.getinstance().WriteBit 方法将布尔值列表写入地址列表
			S7control.getinstance().WriteBit(niuanaddressList3, sValue);
			System.out.println(
			"Values " + sValue + " written to PLC at address "
			+ niuanaddressList3);
			}
			}
			} catch (Exception e) {
			System.err.println("An error occurred while writing bit to PLC: " + e.getMessage());
			}

			// 存片等待延迟
			customS7Control.Writetime(messageArray, timeout2, 2);

			// 清空消息列表
			webserver.clearMessages();
			}
			}else{
			log.info("Parameter2 is closed");
			}
			}
			}
			} catch (InterruptedException e) {
			e.printStackTrace();
			}

			// id
			List<String> addressList1 = Arrays.asList(config.getProperty("Parameter2.id").split(","));

			List<String> paramlist = S7control.getinstance().readStrings(addressList1);


			//手动状态
			List<String> addresses = Arrays.asList(config.getProperty("Parameter2.state").split(","));

			List<Short> data = S7control.getinstance().readWords(addresses);


			//清除id
			List<String> addressList0 = Arrays.asList(config.getProperty("Parameter2.cleanid").split(","));


			// 扫码枪
			List<Boolean> data2 = S7control.getinstance().readBits(addressList0);
			List<String> addressList3 = Arrays.asList(config.getProperty("Parameter2.scanner").split(","));

			//急停按钮
			List<String> niuanaddressList3 = Arrays.asList(config.getProperty("Parameter2.stop").split(","));
			List<String> timeout = Arrays.asList(config.getProperty("Parameter2.timeout").split(","));
			String timeout2 = config.getProperty("Parameter2.timeout");


			Long readtimeout = S7control.getinstance().readtime(timeout2);
			List<Boolean> anniuread = S7control.getinstance().readBits(niuanaddressList3);


			List<String> data3 = S7control.getinstance().readStrings(addressList3);
			// A01 A02 B01 B02

			List<String> addresses4 = Arrays.asList(config.getProperty("Parameter2.Currentcell").split(","));


			List<Short> data4 = S7control.getinstance().readWords(addresses4);

			// List<Long> TIME2 = Collections.singletonList(S7control.getinstance().readtime("DB100.194"));
			// System.out.println("addressList：" + TIME2);


			//


			//
			// String[] values6 = { ".x1 ","x2 ","x3",";;x4","x5","x6","x7","x8","x9","x10","x11"};
			// List<String> paramlist = new ArrayList<>(Arrays.asList(values6));
			// Short[] values1 = { 0, 1, 1, 1, 1, 1, 1, 1, 1, 1};
			// List<Short> data = new ArrayList<>(Arrays.asList(values1));
			// Boolean[] value4 = { false, false, false, false, false, false, false, false, false,
			// false};
			// List<Boolean> data2 = new ArrayList<>(Arrays.asList(value4));
			// String[] values3 = { ".x11 ","x21 "};
			// List<String> data3 = new ArrayList<>(Arrays.asList(values3));
			// Short[] values4 = { 2,2,3,4};
			// List<Short> data4 = new ArrayList<>(Arrays.asList(values4));
			//
			//
			JSONObject jsonObject = new JSONObject();
			short[] params = new short[data2.size()];
			for (int i = 0; i < data2.size(); i++) {
			boolean value = data2.get(i);
			params[i] = value ? (short) 1 : (short) 0;
			}
			//
			short[] anniuparams = new short[anniuread.size()];
			for (int i = 0; i < anniuread.size(); i++) {
			boolean value = anniuread.get(i);
			anniuparams[i] = value ? (short) 1 : (short) 0;
			}

			jsonObject.append("params", params);
			jsonObject.append("params", paramlist);
			jsonObject.append("params", data);
			jsonObject.append("params", data3);
			jsonObject.append("params", data4);
			jsonObject.append("jiting", anniuparams);
			jsonObject.append("timeout", readtimeout);


			// WebSocketServer sendwServer = WebSocketServer.getWebSocketServer("Parameter2");
			// if (sendwServer != null) {
			// JSONObject jsonObject = new JSONObject();
			// jsonObject.set("message", "Hello, Parameter2!");
			// sendwServer.sendMessage(jsonObject.toString());
			// }
			HomeController controller = new HomeController();
			ArrayList<WebSocketServer> sendwServer = WebSocketServer.sessionMap.get("Parameter2");
			if (sendwServer != null) {
			for (WebSocketServer webserver : sendwServer) {

			webserver.sendMessage(jsonObject.toString());


			if (webserver != null) {


			List<String> messages = webserver.getMessages();

			if (!messages.isEmpty()) {
			// 将最后一个消息转换为整数类型的列表
			String lastMessage = messages.get(messages.size() - 1);
			// System.out.println("lastMessage：" + lastMessage);
			JSONArray messageArray = new JSONArray(lastMessage);
			//清除ID
			// customS7Control.writeBitToPLC(messageArray, addressList0, 0);


			try {
			// 检查索引是否有效
			if (messageArray.getJSONArray(0).size() > 0) {
			// 获取消息数组
			JSONArray jsonArray = messageArray.getJSONArray(0);
			// 创建一个布尔值列表
			List<Boolean> sValue = new ArrayList<>();
			// 遍历消息数组
			for (int i = 0; i < jsonArray.size(); i++) {
			// 获取消息数组中的值
			Object value = jsonArray.get(i);
			// 检查值是否有效
			if (value != null && !value.toString().equals("null")) {
			try {
			// 移除非数字和数字字符
			String cleanedValue = value.toString().replaceAll("[^0-9-]", "");
			// 解析为布尔值
			boolean val = "1".equals(cleanedValue.trim());
			// 将布尔值添加到布尔值列表中
			sValue.add(val);
			System.out.println("messageValue: " + Arrays.asList(val) + " added to the list");






			} catch (NumberFormatException e) {
			// 如果无法解析为 boolean 类型，则忽略该部分
			System.err.println("Could not parse value: " + value);
			}
			}
			}

			for (int i = 1; i <= 5; i++) {
			boolean value = sValue.get(i);
			if (value) {
			switch (i) {
			case 1:
			controller.UpdateTask(0, 0, paramlist.get(i));
			break;
			case 2:
			case 3:
			case 4:
			case 5:
			controller.UpdateTask(1, 0, paramlist.get(i));
			break;
			default:
			// 处理索引值不在范围内的情况
			break;
			}
			}
			}

			// 检查布尔值列表是否为空
			if (!sValue.isEmpty()) {

			// 调用 S7control.getinstance().WriteBit 方法将布尔值列表写入地址列表
			S7control.getinstance().WriteBit(addressList0, sValue);
			System.out.println("Values " + sValue + " written to PLC at address " + addressList0);
			}
			}
			} catch (Exception e) {
			System.err.println("An error occurred while writing bit to PLC: " + e.getMessage());
			}





			//急停
			// customS7Control.writeBitToPLC(messageArray, niuanaddressList3, 1);

			try {
			// 检查索引是否有效
			if (messageArray.getJSONArray(1).size() > 0) {
			// 获取消息数组
			JSONArray jsonArray = messageArray.getJSONArray(1);
			// 创建一个布尔值列表
			List<Boolean> sValue = new ArrayList<>();
			// 遍历消息数组
			for (int i = 0; i < jsonArray.size(); i++) {
			// 获取消息数组中的值
			Object value = jsonArray.get(i);
			// 检查值是否有效
			if (value != null && !value.toString().equals("null")) {
			try {
			// 移除非数字和数字字符
			String cleanedValue = value.toString().replaceAll("[^0-9-]", "");
			// 解析为布尔值
			boolean val = "1".equals(cleanedValue.trim());
			// 将布尔值添加到布尔值列表中
			sValue.add(val);
			System.out.println("messageValue: " + Arrays.asList(val) + " added to the list");


			} catch (NumberFormatException e) {
			// 如果无法解析为 boolean 类型，则忽略该部分
			System.err.println("Could not parse value: " + value);
			}
			}
			}

			boolean Value1 = sValue.get(0);
			boolean Value2 = sValue.get(1);

			if (Value1) {
			controller.EndTask(0);

			}
			if (Value2) {
			controller.EndTask(0);

			}
			// 检查布尔值列表是否为空
			if (!sValue.isEmpty()) {

			// 调用 S7control.getinstance().WriteBit 方法将布尔值列表写入地址列表
			S7control.getinstance().WriteBit(addressList0, sValue);
			System.out.println("Values " + sValue + " written to PLC at address " + addressList0);
			}
			}
			} catch (Exception e) {
			System.err.println("An error occurred while writing bit to PLC: " + e.getMessage());
			}




			//存片等待延迟
			customS7Control.Writetime(messageArray, timeout2, 2);


			// 清空消息列表
			webserver.clearMessages();
			}
			}
			}
			}
			}
			}
			}