CanadaMes.git - Gitblit

			@@ -1,4 +1,6 @@
			{

			"ip": "localhost",
			"systemTitle": "Login System",
			"usernamePlaceholder": "Please enter username",
			"passwordPlaceholder": "Please enter password",
			@@ -109,6 +111,8 @@
			"有效": "Valid",
			"无效": "Invalid",
			"请输入名称": "Please enter a name",
			"请输入角色": "Please enter a role",
			"请输入权限描述":"Please enter a permission description",
			"长度在 2 到 15 个字符": "Length between 2 and 15 characters",
			"请输入状态": "Please enter the status",
			"添加角色": "Add Role",
			@@ -299,7 +303,7 @@
			"Confirm Modification":"Confirm modification",
			"The glass ID already exists in the loading queue":"The glass ID already exists in the loading queue",
			"This glass ID already exists in the sorting cage":"This glass ID already exists in the sorting cage",
			"Production queue":"Production queue",
			"Outing Queue":"Outing Queue",
			"Enter the Frame No":"Enter the Frame No",
			"Frame No":"Frame No",
			"Glass information corresponding to aluminum frame":"Glass information corresponding to aluminum frame",
			@@ -312,6 +316,14 @@
			"Suspend":"Suspend",
			"Stop":"Stop",
			"Start":"Start",
			"Sequence":"Sequence",
			"Position":"Position",
			"Top":"Top",
			"Up":"Up",
			"Down":"Down",
			"Unable to find the placement method of the aluminum frame":"Unable to find the placement method of the aluminum frame",
			"Unable to find whether the aluminum frame is flipped or not":"Unable to find whether the aluminum frame is flipped or not",
			"You do not have this permission":"You do not have this permission",
			"ServoManualone": {
			"A01 所在格子": "A01 Current Grid",
			"数量": "Quantity",
			@@ -335,12 +347,13 @@
			"A02半自动启动": "A02 Semi-Auto Start",
			"B01 所在格子": "B01 Current Grid",
			"B02 所在格子": "B02 Current Grid"

			},
			"langParameter1": {

			"A01~A02输送": "A01~A02 Conveying",
			"B01~B02输送": "B01~B02 Conveying",
			"D01~D02输送": "D01~D02 Conveying",
			"D01~D06输送": "D01~D06 Conveying",
			"翻转点动速度": "Flip Jog Speed",
			"小车点动速度": "Cart Jog Speed",
			"最高速度": "Max Speed",
			@@ -353,6 +366,9 @@
			"D01手动状态": "D01 Manual Status",
			"清除ID": "Clear ID",
			"ID": "ID",
			"A02ID": "ID",
			"B01ID": "ID",
			"B02ID": "ID",
			"D02手动状态": "D02 Manual Status",
			"D03手动状态": "D03 Manual Status",
			"D04手动状态": "D04 Manual Status",
			@@ -368,7 +384,8 @@
			"A01当前格子": "A01 Current Grid",
			"A02所在格子": "A02 Current Grid",
			"B01所在格子": "B01 Current Grid",
			"B02所在格子": "B02 Current Grid"
			"B02所在格子": "B02 Current Grid",
			"急停后中止/继续选择": "Abort/ResumeTasks"
			},
			"langPositioning1": {
			"格子间距": "GridSpacing",
			@@ -417,35 +434,30 @@
			"出片格位置设定": "OutgoingGridPositionSetting",
			"B01格位置设定":"B01PositionSetting",
			"B02位置设定":"B02PositionSetting"
			},"ManualonePositionlang": {
			}, "ManualonePositionlang": {
			"A01手动格子": "A01 Target grid(Manual)",
			"A01定位速度": "A01 TRAVEL POS Velocity manual",
			"A01当前格子": "A01 Current Grid",
			"A01启动": "A01 Start",
			"A01故障": "A01 Fault",
			"A01复位": "A01 Reset",
			"故障": "Fault",
			"复位": "Reset",
			"A02手动格子": "A02 Target grid(Manual)",
			"A02定位速度": "A02 TRAVEL POS Velocity manual",
			"A02当前格子": "A02 Current Grid",
			"A02启动": "A02 Start",
			"A02故障": "A02 Fault",
			"A02复位": "A02 Reset",
			"复位": "Reset",
			"B01手动格子": "B01 Target grid(Manual)",
			"B01定位速度": "B01 TRAVEL POS Velocity manual",
			"B01当前格子": "B01 Current Grid",
			"B01启动": "Start",
			"B01故障": "Fault",
			"B01复位": "Reset",
			"B01回零": "Zero",
			"B01未回零": "NotZero",
			"B01启动": "B01 Start",
			"复位": "Reset",
			"回零": "Zero",
			"未回零": "NotZero",
			"B02手动格子": "B02 Target grid(Manual)",
			"B02定位速度": "B02 TRAVEL POS Velocity manual",
			"B02当前格子": "B02 Current Grid",
			"B02启动": "Start",
			"B02故障": "Fault",
			"B02复位": "Reset",
			"B02回零": "Zero",
			"B02未回零": "NotZero",
			"B02启动": "B02 Start",
			"复位": "Reset",
			"A01实时位置": "A01 tavel Actual Position",
			"A02实时位置": "A02 tavel Actual Position",
			"B01实时位置": "B02 tavel Actual Position",
			@@ -456,18 +468,17 @@
			"A01定位速度": "A01 TURN POS Velocity manual",
			"A01翻转实时位置": "A01 turn Actual angle",
			"A01翻转启动": "A01 SERVE TURN",
			"A01故障": "Fault",
			"A01复位": "Reset",
			"A01未回零": "NotZero",
			"A01回零": "Zero",
			"故障": "Fault",
			"复位": "Reset",
			"未回零": "NotZero",
			"回零": "Zero",
			"A02手动位置": "A02 turn Target Angle(Manual)",
			"A02定位速度": "A02 TURN POS Velocity manual",
			"A02翻转实时位置": "A02 turn Actual angle",
			"A02翻转启动": "SERVE TURN",
			"A02故障": "Fault",
			"A02翻转启动": "A02 SERVE TURN",
			"A02复位": "Reset",
			"A02未回零": "NotZero",
			"A02回零": "Zero"
			"未回零": "NotZero",
			"回零": "Zero"
			},
			"AutomaticParameterSettinglang": {
			"A01行走高速角度": "A01 turn Angle1",
			@@ -499,12 +510,12 @@
			"A02行走点动": "A02 SERVE TRAVEL",
			"B01行走点动": "B01 SERVE TRAVEL",
			"B02行走点动": "B02 SERVE TRAVEL",
			"B02翻转气缸": "B02 YV TURN",
			"B02升降气缸": "B02 YV UP DOWN",
			"B02电磁阀": "B02 YV Gassing",
			"B01翻转气缸": "B01 YV TURN",
			"B01升降气缸": "B01 YV UP DOWN",
			"B01电磁阀": "B01 YV Gassing",
			"B02翻转气缸": "B02 Solenoid TURN",
			"B02升降气缸": "B02 Solenoid UP DOWN",
			"B02吹气": "B02 Solenoid Gassing",
			"B01翻转气缸": "B01 Solenoid TURN",
			"B01升降气缸": "B01 Solenoid UP DOWN",
			"B01吹气": "B01 Solenoid Gassing",
			"A01输送反向": "A01 VFD conveyor reverse",
			"A02输送反向": "A02 VFD conveyor reverse",
			"A01注电泵": "A01 oil pump",