补充

chenlu

2025-02-13 c25ef736f5b3701cc91ac88e9d278b45d9b4035c

 north-glass-erp/src/main/resources/mapper/mm/MaterialInventory.xml

@@ -58,11 +58,10 @@
        ms.json
        from mm.material_inventory mi left join mm.material_store ms on mi.material_code=ms.id
        <where>
                date(mi.create_time)>=#{startDate} and date(mi.create_time) &lt;= #{endDate} and mi.available_quantity>0
                 and mi.available_quantity>0

        </where>
        order by mi.id desc
        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectMaterialInventoryDatePageTotal">
@@ -72,10 +71,9 @@
        from
        mm.material_inventory mi
        <where>
                date(mi.create_time)>=#{startDate} and date(mi.create_time) &lt;= #{endDate} and mi.available_quantity>0
                 and mi.available_quantity>0

        </where>
        limit #{offset},#{pageSize};
    </select>


@@ -84,8 +82,8 @@
        ou.id as useId,
        ou.project_no as projectNo,
        mi.inventory_quantity AS inventoryQuantity,
        mi.plan_quantity AS availableQuantity,
        mi.plan_quantity AS planQuantity,
        mi.available_quantity AS availableQuantity,
        ou.not_use_count AS planQuantity,
        mi.id,
        mi.inventory_organization as inventoryOrganization,
        mi.material_code AS materialCode,
@@ -102,26 +100,22 @@
        ms.json from pp.optimize_use ou left join mm.material_inventory mi on ou.raw_stock_code=mi.id left join mm.material_store ms on mi.material_code=ms.id
        left join pp.optimize_project op on op.project_no=ou.project_no
        <where>
            mi.plan_quantity>0 and op.state>=100 and
            date(ou.create_time)>=#{startDate} and date(ou.create_time) &lt;= #{endDate}
            ou.not_use_count>0 and mi.plan_quantity>0 and op.state>=100 and ou.state=1

        </where>
        order by ou.id desc
        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectMaterialInventoryEngineeringDatePageTotal">
        select
        CEILING(count(id)/#{pageSize}) as 'pageTotal',
        count(id) as 'total'
        from
        pp.optimize_use ou
        CEILING(count(ou.id)/#{pageSize}) as 'pageTotal',
        count(ou.id) as 'total'
        from pp.optimize_use ou left join mm.material_inventory mi on ou.raw_stock_code=mi.id left join mm.material_store ms on mi.material_code=ms.id
        left join pp.optimize_project op on op.project_no=ou.project_no
        <where>
            ou.not_use_count>0 and ou.state=1 and
            date(ou.create_time)>=#{startDate} and date(ou.create_time) &lt;= #{endDate}
            mi.plan_quantity>0 and op.state>=100 and ou.state=1

        </where>
        limit #{offset},#{pageSize};
    </select>


@@ -154,7 +148,6 @@
            </if>

        </where>
        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectMaterialInventoryPageTotal">
@@ -170,7 +163,6 @@

        </where>

        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectMaterialInventoryEngineering">
@@ -178,8 +170,8 @@
        ou.id as useId,
        ou.project_no as projectNo,
        mi.inventory_quantity AS inventoryQuantity,
        mi.plan_quantity AS availableQuantity,
        mi.plan_quantity AS planQuantity,
        ou.not_use_count AS availableQuantity,
        ou.not_use_count AS planQuantity,
        mi.id,
        mi.inventory_organization as inventoryOrganization,
        mi.material_code AS materialCode,
@@ -205,7 +197,6 @@

        </where>

        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectMaterialInventoryEngineeringPageTotal">
@@ -224,7 +215,6 @@

        </where>

        limit #{offset},#{pageSize};
    </select>


@@ -257,7 +247,7 @@
                and mo.reviewed regexp #{materialOutbound.reviewed}
            </if>
        </where>
        order by mo.reviewed_state desc,mo.create_time desc
        order by mo.create_time desc
        limit #{offset},#{pageSize};
    </select>

@@ -291,7 +281,6 @@
                and mo.reviewed regexp #{materialOutbound.reviewed}
            </if>
        </where>
        limit #{offset},#{pageSize};
    </select>


@@ -373,7 +362,6 @@
                and rw.batch regexp #{returningWarehouse.batch}
            </if>
        </where>
        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectMaterialOutbound">
@@ -428,11 +416,11 @@
                and modd.material_outbound_id regexp #{materialOutboundDetail.materialOutboundId}
            </if>
        </where>
        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectMaterialOutboundEngineering" >
        select
        ou.id as useId,
        ou.project_no as  projectNo,
        modd.inventory_id as id,
        modd.inventory_organization as inventoryOrganization,
@@ -459,7 +447,6 @@
                and modd.material_outbound_id regexp #{materialOutboundDetail.materialOutboundId}
            </if>
        </where>
        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectMaterialOutboundDetailPageTotal">
@@ -473,7 +460,6 @@
                and modd.material_outbound_id regexp #{materialOutboundDetail.materialOutboundId}
            </if>
        </where>
        limit #{offset},#{pageSize};
    </select>


@@ -511,7 +497,6 @@
                and rwd.returning_id regexp #{returningWarehouseDetail.returningId}
            </if>
        </where>
        limit #{offset},#{pageSize};
    </select>

    <select id="getSelectReturningWarehouseDetailPageTotal">
@@ -525,7 +510,6 @@
                and rwd.returning_id regexp #{returningWarehouseDetail.returningId}
            </if>
        </where>
        limit #{offset},#{pageSize};
    </select>


@@ -549,16 +533,36 @@
        delete from mm.material_outbound_detail where material_outbound_id=#{materialOutboundId}
    </delete>

    <delete id="deleteMaterialLog" >
        delete from mm.material_log where operation_order_number=#{materialOutboundId}
    </delete>

    <delete id="deleteReturningWarehouseDetail" >
        delete from mm.returning_warehouse_detail where returning_id=#{returningId}
    </delete>

    <delete id="deleteReturningWarehouse" >
        delete from mm.returning_warehouse where returning_id=#{returningId}
    </delete>

    <select id="getMaximum" >
        select count(*) from mm.material_outbound where  date(create_time)=CURDATE()
        select
            ifnull(SUBSTR(max(right(material_outbound_id,8)) from 7),0)
        from
            mm.material_outbound as a
        where
            date(a.create_time) = curdate()

    </select>

    <select id="getMaximums" >
        select count(*) from mm.returning_warehouse where  date(create_time)=CURDATE()
        select
            ifnull(SUBSTR(max(right(returning_id,8)) from 7),0)
        from
            mm.returning_warehouse as a
        where
            date(a.create_time) = curdate()

    </select>

    <select id="getMaterialOutboundCount" >
@@ -676,14 +680,14 @@
    </insert>

    <update id="updateMaterialInventoryAvailableOptOut">
        update mm.material_inventory
        set available_quantity=available_quantity-#{quantity}
        update pp.optimize_use
        set not_use_count=not_use_count-#{quantity}
        where id=#{useId}
    </update>

    <update id="updateMaterialInventoryAvailableOptInt">
        update mm.material_inventory
        set available_quantity=available_quantity+#{quantity}
        update pp.optimize_use
        set not_use_count=not_use_count+#{quantity}
        where id=#{useId}
    </update>

@@ -747,13 +751,19 @@
    <update id="updateMaterialInventory" >
        update mm.material_inventory set inventory_quantity=inventory_quantity+#{materialInventory.inventoryQuantity},
                                         available_quantity=available_quantity+#{materialInventory.inventoryQuantity},
                                         total_area=total_area+#{totalArea}
                                         total_area=single_piece_area*inventory_quantity
                                     where  material_code=#{materialCode} and date_of_manufacture=#{materialInventory.dateOfManufacture}
    </update>

    <update id="updateMaterialInventoryNull" >
        update mm.material_inventory set inventory_quantity=inventory_quantity+#{materialInventory.inventoryQuantity},
                                         available_quantity=available_quantity+#{materialInventory.inventoryQuantity},
                                         total_area=single_piece_area*inventory_quantity
        where  material_code=#{materialCode}
    </update>

    <update id="updateMaterialInventoryReturning" >
        update mm.material_inventory set available_quantity=available_quantity+#{returningWarehouseDetail.returnQuantity},
                                         total_area=total_area+#{totalArea}
        update mm.material_inventory set available_quantity=available_quantity+#{returningWarehouseDetail.returnQuantity}
       where  material_code=#{materialCode} and
                date_of_manufacture=#{returningWarehouseDetail.dateOfManufacture}

@@ -761,8 +771,7 @@
    </update>

    <update id="updateMaterialInventoryReturningNull" >
        update mm.material_inventory set available_quantity=available_quantity+#{returningWarehouseDetail.returnQuantity},
                                         total_area=total_area+#{totalArea}
        update mm.material_inventory set available_quantity=available_quantity+#{returningWarehouseDetail.returnQuantity}
        where  material_code=#{materialCode} and
            date_of_manufacture is null

@@ -1038,5 +1047,19 @@

    </select>

    <select id="deleteMaterialInventory">
        delete from
        mm.material_inventory mi
        <where>
            <if test="ids != null and ids != ''">
                and mi.id in
                <foreach item="id" collection="ids" open="(" separator="," close=")">
                    #{id}
                </foreach>
            </if>

        </where>
    </select>


</mapper>