ERP_override.git

			@@ -196,13 +196,22 @@
			op.project_name,
			0 as patchState,
			c.rack AS rackNo,
			0 as layoutId
			0 as heatLayoutId,
			d.process,
			o.order_id AS orderNo,
			o.customer_name AS customerName,
			o.processing_note AS processingNote,
			o.project AS projectName,
			od.product_name AS productName,
			od.building_number AS buildingNumber
			FROM
			pp.flow_card c
			LEFT JOIN sd.order_glass_detail d ON c.order_id = d.order_id
			AND c.order_number = d.order_number
			AND c.technology_number = d.technology_number
			INNER JOIN pp.optimize_project AS op ON op.project_no = c.project_no
			LEFT JOIN sd.ORDER o ON o.order_id = c.order_id
			LEFT JOIN order_detail od ON c.order_id = od.order_id
			WHERE
			c.project_no IS NOT NULL
			and c.project_no = #{projectNo}
			@@ -226,7 +235,14 @@
			op.project_name,
			1 as patch_state,
			a.id as rackNo,
			0 as layoutId
			0 as heatLayoutId,
			d.process,
			o.order_id AS orderNo,
			o.customer_name AS customerName,
			o.processing_note AS processingNote,
			o.project AS projectName,
			od.product_name AS productName,
			od.building_number AS buildingNumber
			FROM
			pp.patch_log c
			LEFT JOIN sd.order_glass_detail d ON c.order_id = d.order_id
			@@ -234,6 +250,8 @@
			AND c.technology_number = d.technology_number
			INNER JOIN pp.optimize_project AS op ON op.project_no = c.project_no
			LEFT JOIN pp.flow_card fc ON c.process_id = fc.process_id and fc.technology_number=c.technology_number
			LEFT JOIN sd.ORDER o ON o.order_id = c.order_id
			LEFT JOIN order_detail od ON c.order_id = od.order_id
			left join
			(select (@row_number := @row_number + 1) as id,process_id as process_id,technology_number as technology_number from (select process_id,technology_number from pp.flow_card tt where project_no =#{projectNo} group by process_id,technology_number) tt,(select @row_number := 0) as t) a
			on a.process_id=c.process_id and a.technology_number=c.technology_number
			@@ -311,7 +329,7 @@
			<select id="computeAndOptimization">
			SELECT
			c.rack AS rackNo,
			h.layout_id as layoutId,
			h.layout_id as heatLayoutId,
			h.width AS width,
			h.height AS height,
			count( 1 ) AS quantity,
			@@ -323,7 +341,14 @@
			c.order_number,
			h.order_sort AS orderSort,
			d.icon AS markIcon,
			h.patch_state AS patchState
			h.patch_state AS patchState,
			d.process,
			o.order_id AS orderNo,
			o.customer_name AS customerName,
			o.processing_note AS processingNote,
			o.project AS projectName,
			od.product_name AS productName,
			od.building_number AS buildingNumber
			from
			pp.`optimize_heat_detail` h
			LEFT JOIN pp.flow_card c ON h.process_id = c.process_id
			@@ -332,6 +357,8 @@
			LEFT JOIN sd.order_glass_detail d ON c.order_id = d.order_id
			AND c.order_number = d.order_number
			AND c.technology_number = d.technology_number
			LEFT JOIN sd.order o on o.order_id = c.order_id
			LEFT JOIN order_detail od on c.order_id = od.order_id
			WHERE
			h.project_no = #{projectNo}
			GROUP BY
			@@ -1233,6 +1260,7 @@
			patch_state,
			mark_icon,
			isRotate,
			glass_point,
			rack_no
			) VALUES (
			#{projectId},
			@@ -1251,6 +1279,7 @@
			#{glass.patchState},
			#{glass.markIcon},
			#{glass.isRotate},
			#{glass.glassPoint},
			#{glass.rackNo}
			);
			</foreach>
			@@ -1281,6 +1310,8 @@
			stock_id,
			width,
			height,
			realwidth,
			realheight,
			usage_rate,
			stock_code,
			up_trim,
			@@ -1296,6 +1327,8 @@
			#{glass.stockId},
			#{glass.width},
			#{glass.height},
			#{glass.realWidth},
			#{glass.realHeight},
			#{glass.usageRate},
			#{glass.stockCode},
			#{glass.upTrim},
			@@ -1367,6 +1400,26 @@
			#{glassThickness}

			)
			</insert>
			<insert id="addUpdateOffcut">
			INSERT INTO pp.optimize_offcut (
			project_no,
			stock_id,
			width,
			height,
			x_axis,
			y_axis,
			model,
			thickness
			) VALUES (
			#{processId},
			1,
			#{detail.width},
			#{detail.height},
			#{detail.x},
			#{detail.y},
			#{glassType},
			#{glassThickness})
			</insert>


			@@ -1466,6 +1519,14 @@
			UPDATE pp.flow_card
			SET rack = #{rackValue}
			WHERE process_id = #{processId} AND technology_number = #{technologyNumber}
			</update>
			<update id="updateNormalDetails">
			UPDATE pp.optimize_detail
			SET
			x_axis = #{detail.x},
			y_axis = #{detail.y}
			WHERE
			project_no = #{processId} AND polys_id = #{detail.polySort}
			</update>

			<select id="simulatedTypesettingUsingOpt">
			@@ -1668,6 +1729,9 @@
			WHERE
			project_no = #{projectNumber}
			</delete>
			<delete id="deleteOffcutDetails">
			delete from pp.optimize_offcut where project_no = #{processId}
			</delete>


			<select id="selectOptimizeProject">
			@@ -1712,7 +1776,9 @@
			opd.glass_id as glassId,
			opd.project_no as engineerId,
			opd.process_id as flowCardId,
			opd.order_sort as orderNumber,
			od.order_id as orderNumber,
			opd.order_sort as productSortNumber,
			IF(LOCATE('中空', ogd.process ) > 0, JSON_UNQUOTE(JSON_EXTRACT(pd.separation, "$.lowE")), 0) as hollowCombineDirection,
			opd.o_width as width,
			opd.o_height as height,
			op.glass_thickness as thickness,
			@@ -1751,6 +1817,7 @@
			and ogd.technology_number = fc.technology_number
			left join pp.optimize_heat_detail ohd on ohd.layout_id = opd.heat_layout_id
			and ohd.sort = opd.heat_layout_sort and ohd.project_no=opd.project_no
			left join sd.product_detail pd on od.product_id=pd.prod_id and opd.layer=pd.glass_sort
			where
			opd.project_no = #{projectNo}
			</select>
			@@ -1796,6 +1863,8 @@
			SELECT
			width,
			height,
			realwidth,
			realheight,
			stock_id AS stockId,
			stock_code AS stockCode,
			usage_rate AS usageRate,
			@@ -1827,6 +1896,7 @@
			y_axis AS y,
			mark_icon AS markIcon,
			isRotate,
			glass_point AS glassPoint,
			rack_no As rackNo
			FROM
			pp.optimize_detail