Merge remote-tracking branch 'origin/master'

廖井涛

2025-08-25 fec9f42e00f2df68a2a20cbf132b17bdeed8e63a

 north-glass-erp/src/main/resources/mapper/pp/GlassOptimize.xml

@@ -179,6 +179,91 @@
    </select>



    <select id="directOptimization">
        (SELECT
             c.project_no,
             d.child_width as 'width',
             d.child_height as 'height',
             c.quantity,
             concat( c.process_id, '-', c.technology_number ) AS 'process_id',
             c.process_id AS processId,
             c.technology_number as layer,
             c.layers_number as totalLayer,
             round( d.area * c.quantity, 4 ) as 'area',
             c.order_number,
             d.icon  AS markIcon,
             op.project_name,
             0 as patchState,
             c.rack AS rackNo,
             0 as heatLayoutId,
             d.process,
             o.order_id AS orderNo,
             o.customer_name AS customerName,
             o.processing_note AS processingNote,
             o.project AS projectName,
             od.product_name AS productName,
             od.building_number AS buildingNumber
         FROM
             pp.flow_card c
                 LEFT JOIN sd.order_glass_detail d ON c.order_id = d.order_id
                 AND c.order_number = d.order_number
                 AND c.technology_number = d.technology_number
                 INNER JOIN pp.optimize_project AS op ON op.project_no = c.project_no
                 LEFT JOIN sd.ORDER o ON o.order_id = c.order_id
                 LEFT JOIN order_detail od ON c.order_id = od.order_id
         WHERE
             c.project_no IS NOT NULL
           and c.project_no = #{projectNo}
         ORDER BY
             c.process_id,
             c.order_number
        ) union
        (
            SELECT
                c.project_no,
                d.child_width as 'width',
                d.child_height as 'height',
                c.patch_num as quantity,
                concat( c.process_id, '-', c.technology_number ) AS 'process_id',
                c.process_id AS 'process_ids',
                c.technology_number as layer,
                fc.layers_number as total_layer,
                round( d.area * c.patch_num, 4 ) as 'area',
                c.order_sort as order_number,
                d.icon,
                op.project_name,
                1 as patch_state,
                a.id as rackNo,
                0 as heatLayoutId,
                d.process,
                o.order_id AS orderNo,
                o.customer_name AS customerName,
                o.processing_note AS processingNote,
                o.project AS projectName,
                od.product_name AS productName,
                od.building_number AS buildingNumber
            FROM
                pp.patch_log c
                    LEFT JOIN sd.order_glass_detail d ON c.order_id = d.order_id
                    AND c.order_sort = d.order_number
                    AND c.technology_number = d.technology_number
                    INNER JOIN pp.optimize_project AS op ON op.project_no = c.project_no
                    LEFT JOIN pp.flow_card fc ON c.process_id = fc.process_id and fc.technology_number=c.technology_number
                    LEFT JOIN sd.ORDER o ON o.order_id = c.order_id
                    LEFT JOIN order_detail od ON c.order_id = od.order_id
                    left join
                (select (@row_number := @row_number + 1) as id,process_id as process_id,technology_number as technology_number from (select process_id,technology_number from pp.flow_card tt where project_no =#{projectNo} group by process_id,technology_number) tt,(select @row_number := 0) as t) a
                on a.process_id=c.process_id and a.technology_number=c.technology_number
            WHERE
                c.project_no IS NOT NULL
              and c.project_no = #{projectNo}
            ORDER BY
                a.id,
                c.process_id,
                c.order_sort)
    </select>

    <!--优化查询-->
    <select id="analogComputationOptimization">
        SELECT
@@ -238,6 +323,61 @@
            LENGTH( h.layout_id ),
            h.layout_id;
    </select>


    <!--优化查询-->
    <select id="computeAndOptimization">
        SELECT
            c.rack AS rackNo,
            h.layout_id as heatLayoutId,
            h.width AS width,
            h.height AS height,
            count( 1 ) AS quantity,
            concat( h.process_id, '-', h.layer ) AS processId,
            h.process_id as process_ids,
            h.layer,
            c.layers_number as totalLayer,
            round( d.area * count( 1 ), 4 ) AS 'area',
            c.order_number,
            h.order_sort AS orderSort,
            d.icon AS markIcon,
            h.patch_state  AS patchState,
            d.process,
            o.order_id AS orderNo,
            o.customer_name AS customerName,
            o.processing_note AS processingNote,
            o.project AS projectName,
            od.product_name AS productName,
            od.building_number AS buildingNumber
        from
            pp.`optimize_heat_detail` h
                LEFT JOIN pp.flow_card c ON h.process_id = c.process_id
                AND h.layer = c.technology_number
                AND h.order_sort = c.order_number
                LEFT JOIN sd.order_glass_detail d ON c.order_id = d.order_id
                AND c.order_number = d.order_number
                AND c.technology_number = d.technology_number
                LEFT JOIN sd.order o on  o.order_id = c.order_id
                LEFT JOIN order_detail od on  c.order_id = od.order_id
        WHERE
            h.project_no = #{projectNo}
        GROUP BY
            h.layout_id,
            h.width,
            h.height,
            h.process_id,
            h.layer,
            d.area,
            c.quantity,
            d.child_width,
            d.child_height,
            c.order_number,
            d.icon
        ORDER BY
            LENGTH( h.layout_id ),
            h.layout_id;
    </select>



    <select id="getOptimizeDetail">
@@ -633,7 +773,7 @@
        from pp.optimize_project as p
                 left join pp.optimize_admin as a on p.creater = a.Id
        where (`p`.`state` > 0)
            and (tempering_state>0 or optimize_state>0)
#             and (tempering_state>0 or optimize_state>0)
            and DATE (`p`.`create_time`) BETWEEN #{startSelectTime} AND #{endSelectTime}
        <if test="optimizeProjectMange.projectNumber != null and optimizeProjectMange.projectNumber != ''">
            and p.project_no regexp #{optimizeProjectMange.projectNumber}
@@ -1111,14 +1251,16 @@
            order_sort,
            stock_id,
            polys_id,
            o_width,
            o_height,
            p_width,
            p_height,
            width,
            height,
            x_axis,
            y_axis,
            patch_state,
            mark_icon,
            isRotate,
            glass_point,
            rack_no
            ) VALUES (
            #{projectId},
@@ -1136,6 +1278,8 @@
            #{glass.y},
            #{glass.patchState},
            #{glass.markIcon},
            #{glass.isRotate},
            #{glass.glassPoint},
            #{glass.rackNo}
            );
        </foreach>
@@ -1166,12 +1310,15 @@
            stock_id,
            width,
            height,
            realwidth,
            realheight,
            usage_rate,
            stock_code,
            up_trim,
            down_trim,
            left_trim,
            right_trim,
            count,
            glass_count,
            glass_area,
            create_time
@@ -1180,13 +1327,16 @@
            #{glass.stockId},
            #{glass.width},
            #{glass.height},
            #{glass.realWidth},
            #{glass.realHeight},
            #{glass.usageRate},
            #{glass.stockCode},
            #{glass.upTrim},
            #{glass.downTrim},
            #{glass.leftTrim},
            #{glass.rightTrim},
            #{glass.glassCount},
            #{glass.count},
            #{glass.glassQuantity},
            #{glass.glassArea},
            now()
            );
@@ -1228,6 +1378,48 @@
            now()
            );
        </foreach>
    </insert>
    <insert id="addOptimizeOffcut">
        INSERT INTO pp.optimize_offcut (
        project_no,
        stock_id,
        width,
        height,
        x_axis,
        y_axis,
        model,
        thickness
        ) VALUES (
        #{projectId},
        #{map.stockSort},
        #{map.width},
        #{map.height},
        #{map.x},
        #{map.y},
        #{glassType},
        #{glassThickness}

        )
    </insert>
    <insert id="addUpdateOffcut">
        INSERT INTO pp.optimize_offcut (
            project_no,
            stock_id,
            width,
            height,
            x_axis,
            y_axis,
            model,
            thickness
        ) VALUES (
                     #{processId},
                     1,
                     #{detail.width},
                     #{detail.height},
                     #{detail.x},
                     #{detail.y},
                     #{glassType},
                     #{glassThickness})
    </insert>


@@ -1309,9 +1501,32 @@
        from  pp.optimize_config oc where config_type=4 and creater=#{username}
    </select>


    <select id="getGrindingOptimize">
        select
            CAST(REPLACE(JSON_EXTRACT( oc.config_detail, '$.left_edge' ), '"', '') AS DECIMAL(10,2)) as leftGrind,
            CAST(REPLACE(JSON_EXTRACT( oc.config_detail, '$.up_edge' ), '"', '') AS DECIMAL(10,2)) as upGrind,
            CAST(REPLACE(JSON_EXTRACT( oc.config_detail, '$.right_edge' ), '"', '') AS DECIMAL(10,2)) as rightGrind,
            CAST(REPLACE(JSON_EXTRACT( oc.config_detail, '$.down_edge' ), '"', '') AS DECIMAL(10,2)) as downGrind
        from  pp.optimize_config oc where config_type=4 and creater=#{username}
    </select>

    <update id="updateOptimizeConfig">
        UPDATE pp.optimize_config set config_detail=#{json},create_time=now()
        where config_type=#{type} and creater=#{username}
    </update>
    <update id="updateFlowCardRack">
        UPDATE pp.flow_card
        SET rack = #{rackValue}
        WHERE process_id = #{processId} AND technology_number = #{technologyNumber}
    </update>
    <update id="updateNormalDetails">
        UPDATE pp.optimize_detail
        SET
            x_axis = #{detail.x},
            y_axis = #{detail.y}
        WHERE
            project_no = #{processId} AND polys_id = #{detail.polySort}
    </update>

    <select id="simulatedTypesettingUsingOpt">
@@ -1507,11 +1722,205 @@
        delete from pp.other_flow_card
        where project_no = #{projectNumber}
    </delete>
    <delete id="deleteOptimizeOffcut">
        DELETE
        FROM
            pp.optimize_offcut
        WHERE
            project_no = #{projectNumber}
    </delete>
    <delete id="deleteOffcutDetails">
        delete from pp.optimize_offcut where project_no = #{processId}
    </delete>


    <select id="selectOptimizeProject">
        select
            project_no as engineerId,
            project_name as engineerName,
            avg_cut_pct as avgAvailability,
            valid_cut_pct as validAvailability,
            last_cut_pct as lastAvailability,
            glass_total as glassTotal,
            glass_total_area as glassTotalArea,
            raw_stock_qty as planPatternTotal,
            raw_stock_area as planPatternTotalArea,
            glass_thickness as thickness,
            glass_type as filmsId
        from
            pp.optimize_project
        where
            project_no = #{projectNo}
    </select>

    <select id="selectOptimizeLayout">
        select
            ol.project_no as engineeringId,
            op.glass_type as filmsId,
            ol.realwidth as rawGlassWidth,
            ol.realheight as rawGlassHeight,
            op.glass_thickness as rawGlassThickness,
            ol.stock_id rawSequence
        from
            pp.optimize_layout ol
                left join pp.optimize_project op on ol.project_no = op.project_no
        where
            ol.project_no = #{projectNo}
        order by
            ol.stock_id
    </select>


    <select id="selectOptimizeDetail">
        select
            opd.glass_id as glassId,
            opd.project_no as engineerId,
            opd.process_id as flowCardId,
            od.order_id as orderNumber,
            opd.order_sort as productSortNumber,
            IF(LOCATE('中空', ogd.process ) > 0, JSON_UNQUOTE(JSON_EXTRACT(pd.separation, "$.lowE")), 0) as hollowCombineDirection,
            opd.o_width as width,
            opd.o_height as height,
            op.glass_thickness as thickness,
            op.glass_type as filmsId,
            opd.total_layer as totalLayer,
            opd.layer,
            opd.stock_id as rawSequence,
            opd.p_width as edgWidth,
            opd.p_height as edgHeight,
            opd.x_axis as xAxis,
            opd.y_axis as yAxis,
            if(opd.o_width!=opd.width,1,0) as rawAngle,
            opd.heat_layout_id as temperingLayoutId,
            opd.heat_layout_sort as temperingFeedSequence,
            ohd.x_axis as xCoordinate,
            ohd.y_axis as yCoordinate,
            ohd.rotate_angle as angle,
            IF(LOCATE('中空', ogd.process ) > 0 or LOCATE('夹层', ogd.process ) > 0, 1, 0) as isMultiple,
            od.width as maxWidth,
            od.height as maxHeight,
            opd.mark_icon as markIcon,
            fc.`merge` as combine,
            concat( opd.process_id, '/', opd.layer ) as flowCardSequence,
            ogd.process
        from
            pp.optimize_detail opd
                left join pp.optimize_project op on op.project_no = opd.project_no
                left join pp.flow_card fc on opd.process_id = fc.process_id
                and opd.layer = fc.technology_number
                and opd.order_sort = order_number
                left join sd.`order` o on fc.order_id = o.order_id
                left join sd.order_detail od on fc.order_id = od.order_id
                and fc.order_number = od.order_number
                left join sd.order_glass_detail ogd on fc.order_id = ogd.order_id
                and fc.order_number = ogd.order_number
                and ogd.technology_number = fc.technology_number
                left join pp.optimize_heat_detail ohd on ohd.layout_id = opd.heat_layout_id
                and ohd.sort = opd.heat_layout_sort and ohd.project_no=opd.project_no
                left join sd.product_detail pd on od.product_id=pd.prod_id and opd.layer=pd.glass_sort
        where
            opd.project_no = #{projectNo}
    </select>

    <select id="selectFlowCardInfoList">
        select
            fc.process_id as flowCardId,
            ogd.child_width as width,
            ogd.child_height as height,
            REPLACE (JSON_UNQUOTE( JSON_EXTRACT( pd.separation, '$.thickness' )), 'mm', '' ) as thickness,
            JSON_UNQUOTE(JSON_EXTRACT( pd.separation, '$.color' )) as filmsId,
            fc.layers_number as totalLayer,
            fc.technology_number as layer,
            fc.quantity as glassTotal,
            od.order_number as orderNumber,
            od.product_name as productName,
            o.customer_name as customerName
        from
            pp.flow_card fc
                left join sd.`order` o on fc.order_id = o.order_id
                left join sd.order_detail od on fc.order_id = od.order_id
                and fc.order_number = od.order_number
                left join sd.order_glass_detail ogd on fc.order_id = ogd.order_id
                and fc.order_number = ogd.order_number
                and ogd.technology_number = fc.technology_number
                left join sd.product p on od.product_id = p.id
                left join sd.product_detail pd on od.product_id = pd.prod_id
                and fc.technology_number = pd.glass_sort
        where
            project_no =#{projectNo}
    </select>
    <select id="getGlassInfo" resultType="java.util.Map">
        select
            project_no,
            glass_type,
            glass_thickness
        from
            pp.optimize_project
        where
            project_no = #{projectId}
    </select>
    <select id="getOptimizeLayoutsInfo" resultType="java.util.Map">
        SELECT
            width,
            height,
            realwidth,
            realheight,
            stock_id AS stockId,
            stock_code AS stockCode,
            usage_rate AS usageRate,
            up_trim AS upTrim,
            down_trim AS downTrim,
            left_trim AS leftTrim,
            right_trim AS rightTrim,
            count AS quantity,
            glass_count AS glassQuantity
        FROM
            pp.optimize_layout
        where
            project_no = #{projectId}
    </select>
    <select id="getOptimizeDetailsInfo" resultType="java.util.Map">
        SELECT
            0 As isRemain,
            width AS realWidth,
            height AS realHeight,
            p_width AS width,
            p_height AS height,
            process_id AS processId,
            layer,
            total_layer AS totalLayer,
            order_sort As orderSort,
            stock_id AS layoutId,
            stock_number AS glassSort,
            x_axis AS x,
            y_axis AS y,
            mark_icon AS markIcon,
            isRotate,
            glass_point AS glassPoint,
            rack_no As rackNo
        FROM
            pp.optimize_detail
        WHERE
            project_no = #{projectId}
    </select>
    <select id="getOptimizeOffsetsInfo" resultType="java.util.Map">
        SELECT
            1 AS isRemain,
            0 AS isRotate,
            width AS realWidth,
            height AS realHeight,
            width AS width,
            height AS height,
            stock_id AS stockSort,
            x_axis AS x,
            y_axis AS y,
            model AS glassType,
            thickness AS glassThickness
        FROM
            pp.optimize_offcut
        WHERE
            project_no = #{projectId}
    </select>


</mapper>