YiWuProject.git

			@@ -18,30 +18,47 @@
			* 磨边清洗前
			*/
			/**
			* A09出片目标位置 d02卧转立钢化出片 2001
			* A10出片目标位置 d05卧转立人工出片 2002
			* A09出片目标位置 d02卧转立 2001
			* A10出片目标位置 d05卧转立 2002
			*/
			public static final Integer OUT_TARGET_POSITION_ZERO = 0;
			public static final Integer A09_OUT_TARGET_POSITION = 2001;
			public static final Integer A10_OUT_TARGET_POSITION = 2002;


			/**
			* A09出片目标位置 d02卧转立钢化出片 3001
			* A10出片目标位置 d05卧转立人工出片 3002
			*/
			public static final Integer TEMPERING_OUT_TARGET_POSITION = 3001;
			public static final Integer ARTIFICIAL_OUT_TARGET_POSITION = 3002;

			/**
			* 卧式理片笼详情表玻璃状态
			* 识别后成功状态100
			* 识别后成功状态0
			* 识别后成功进笼的状态100
			* 出片任务101
			* 人工下片101
			* 拿走200
			* 破损201
			* 人工下片102
			* 出片中103
			* 调度中104
			* 破损8
			* 拿走9
			*/
			public static final Integer GLASS_STATE_NEW = 0;
			public static final Integer GLASS_STATE_IN = 100;
			public static final Integer GLASS_STATE_OUT = 101;
			public static final Integer GLASS_STATE_ARTIFICIAL = 102;
			public static final Integer GLASS_STATE_TAKE = 200;
			public static final Integer GLASS_STATE_DAMAGE = 201;
			public static final Integer GLASS_STATE_OUT_ING = 103;
			public static final Integer GLASS_STATE_SCHEDULE_ING = 104;
			public static final Integer GLASS_STATE_DAMAGE = 8;
			public static final Integer GLASS_STATE_TAKE = 9;
			public static final List<Integer> GLASS_STATE_DAMAGE_TAKE = Arrays.asList(8, 9);
			public static final List<Integer> GLASS_STATE_IN_ALL = Arrays.asList(100, 102, 103, 104);
			public static final List<Integer> GLASS_STATE_IN_ALL_ZERO = Arrays.asList(0, 100, 102, 103, 104);

			/**
			* 卧式理片笼详情表玻璃状态
			* 进片任务1
			* 出片任务2
			* 出片任务2
			*/
			public static final Integer GLASS_CACHE_TYPE_IN = 1;
			@@ -77,40 +94,35 @@
			public static final String BIG_STORAGE_REQUEST_IN = "1";

			/**
			* 大理片笼详情状态
			* 0 大理片笼进片中
			* 1 大理片笼在笼内
			* 2 大理片笼出片中
			* 3 大理片笼出片完成
			* 4 大理片笼手动出片
			*/
			public static final Integer BIG_STORAGE_IN = 0;
			public static final Integer BIG_STORAGE_INSIDE = 1;
			public static final Integer BIG_STORAGE_OUT = 2;
			public static final Integer BIG_STORAGE_OUTSIDE = 3;
			public static final Integer BIG_STORAGE_MANUAL = 4;

			/**
			* 卧转立进片请求
			* 1 任务生成
			* 2 卧转立进片完成
			* 3 大车进片完成
			* 4 大理片笼进片完成
			* 8 大理片笼进片破损
			* 9 大理片笼进片拿走
			*/
			public static final Integer BIG_STORAGE_IN_NEW = 1;
			public static final Integer BIG_STORAGE_IN_UP = 2;
			public static final Integer BIG_STORAGE_IN_CAR = 3;
			public static final Integer BIG_STORAGE_IN_SLOT = 4;
			// public static final Integer BIG_STORAGE_IN_DAMAGE = 8;
			// public static final Integer BIG_STORAGE_IN_ERROR = 9;
			public static final List<Integer> BIG_STORAGE_IN_UP_ALL = Arrays.asList(1, 2);
			/**
			* 卧转立出片请求
			* 1 任务生成
			* 2 玻璃进大车完成
			* 3 大车出片完成
			* 8 大理片笼进片破损
			* 9 大理片笼进片拿走
			*/
			public static final Integer BIG_STORAGE_OUT_NEW = 1;
			public static final Integer BIG_STORAGE_OUT_CAR = 2;
			public static final Integer BIG_STORAGE_OUT_SUCCESS = 3;
			// public static final Integer BIG_STORAGE_OUT_DAMAGE = 8;
			// public static final Integer BIG_STORAGE_OUT_ERROR = 9;
			public static final List<Integer> BIG_STORAGE_OUT_ALL = Arrays.asList(2, 3);

			/**
			* 卧转立出片请求
			@@ -121,12 +133,6 @@
			public static final Integer BIG_STORAGE_IN_RUN = 2;

			/**
			* 大理片笼宽度及玻璃间距
			*/
			public static final Integer BIG_STORAGE_WIDTH = 5000;
			public static final Integer BIG_STORAGE_GAP = 20;

			/**
			* 钢化小片表
			* -1 生成任务
			* 0 出片完成
			@@ -134,17 +140,35 @@
			* 2 进炉完成
			* 3 钢化完成
			* 4 出片完成
			* 5 破损
			* 6 拿走
			* 8 破损
			* 9 拿走
			*/

			public static final Integer TEMPERING_NEW =-1;
			public static final Integer TEMPERING_OUT =0;
			public static final Integer TEMPERING_DROP =1;
			public static final Integer TEMPERING_START =2;
			public static final Integer TEMPERING_SUCCESS =3;
			public static final Integer TEMPERING_END =4;
			public static final Integer TEMPERING_DAMAGE =5;
			public static final Integer TEMPERING_TAKE =6;
			public static final Integer TEMPERING_NEW = -1;
			public static final Integer TEMPERING_OUT = 0;
			public static final Integer TEMPERING_DROP = 1;
			public static final Integer TEMPERING_START = 2;
			public static final Integer TEMPERING_SUCCESS = 3;
			public static final Integer TEMPERING_END = 4;
			// public static final Integer TEMPERING_DAMAGE = 8;
			// public static final Integer TEMPERING_TAKE = 9;

			/**
			* 下片
			*/
			/**
			* 执行线路格子信息
			*/
			public static final List<Integer> G06_WORK_STATION = Arrays.asList(1, 2, 3);
			public static final List<Integer> G11_WORK_STATION = Arrays.asList(4, 5, 6);
			public static final int G13_WORK_STATION = 7;
			public static final List<Integer> WORK_STATION_ALL = Arrays.asList(1, 2, 3, 4, 5, 6, 7);

			/**
			* 启用 1
			* 禁用 0
			*/
			public static final Integer SLOT_ON = 1;
			public static final Integer SLOT_OFF = 0;

			}