1、大理片笼进片逻辑调整：a、将扫描id后进生成任务信息，不执行卧转立进片命令； b、进片车空闲扫描，如果存...

zhoushihao

2024-06-30 8223485b2f6c909de81924e107b1e268aa04bd41

 hangzhoumesParent/moduleService/CacheVerticalGlassModule/src/main/java/com/mes/job/PlcStorageCageTask.java

@@ -78,11 +78,11 @@
    @Value("${mes.galssGap}")
    private Integer galssGap;

    @Scheduled(fixedDelay = 5000)
    //    @Scheduled(fixedDelay = 5000)
    public void plcToHomeEdgScan() {
        PlcParameterObject plcParameterObject = S7object.getinstance().PlcMesObject;
        String d01Id = plcParameterObject.getPlcParameter("D01ID1").getValue();
        String d02Id = plcParameterObject.getPlcParameter("D02ID1").getValue();
        String d01Id = plcParameterObject.getPlcParameter("D01ID").getValue();
        String d02Id = plcParameterObject.getPlcParameter("D02ID").getValue();
        String d03State = plcParameterObject.getPlcParameter("D03State").getValue();
        String d05State = plcParameterObject.getPlcParameter("D05State").getValue();
        String mesD03Address = plcParameterObject.getPlcParameter("MESToD03").getAddress();
@@ -98,27 +98,28 @@
            log.info("两条线卧转立均在执行任务，结束本次扫描进卧转立任务");
            return;
        }
        Boolean flag01 = Boolean.FALSE;
        Boolean flag04 = Boolean.FALSE;
//        Boolean flag01 = Boolean.FALSE;
//        Boolean flag04 = Boolean.FALSE;
        //按照线路及玻璃id获取相邻两块玻璃 卧转立上的玻璃
        if (StringUtils.isBlank(d01Id) && !REQUEST_WORD.equals(d03State)) {
            flag01 = judgeGlassTypeStatus(d01Id, Const.A09_OUT_TARGET_POSITION, mesD03Address);
        if (StringUtils.isNotBlank(d01Id) && !REQUEST_WORD.equals(d03State)) {
            judgeGlassTypeStatus(d01Id, Const.A09_OUT_TARGET_POSITION, mesD03Address);
        }
        if (StringUtils.isBlank(d02Id) && !REQUEST_WORD.equals(d05State)) {
            flag04 = judgeGlassTypeStatus(d02Id, Const.A10_OUT_TARGET_POSITION, mesD05Address);
        if (StringUtils.isNotBlank(d02Id) && !REQUEST_WORD.equals(d05State)) {
            judgeGlassTypeStatus(d02Id, Const.A10_OUT_TARGET_POSITION, mesD05Address);
        }
        if (flag01 && flag04) {
            //比较最早一片任务的版图id及版序 求出卧转立的线路
            Integer startLine = getStartLine();
            //计算目标格子，发送启动任务
            computeTargetByLine(startLine);
        } else if (flag01 || flag04) {
            Integer startLine = flag01.equals(Boolean.TRUE) ? Const.A09_OUT_TARGET_POSITION : Const.A10_OUT_TARGET_POSITION;
            //计算目标格子，发送启动任务
            computeTargetByLine(startLine);
        } else {
            log.info("两条线未收到进片任务，结束本次扫描进卧转立任务");
        }
        log.info("结束扫码任务");
//        if (flag01 && flag04) {
//            //比较最早一片任务的版图id及版序 求出卧转立的线路
//            Integer startLine = getStartLine();
//            //计算目标格子，发送启动任务
//            computeTargetByLine(startLine);
//        } else if (flag01 || flag04) {
//            Integer startLine = flag01.equals(Boolean.TRUE) ? Const.A09_OUT_TARGET_POSITION : Const.A10_OUT_TARGET_POSITION;
//            //计算目标格子，发送启动任务
//            computeTargetByLine(startLine);
//        } else {
//            log.info("两条线未收到进片任务，结束本次扫描进卧转立任务");
//        }
    }

    @Scheduled(fixedDelay = 5000)
@@ -129,10 +130,24 @@
            log.info("进片大车非空闲");
            return;
        }
        String d01Id = plcParameterObject.getPlcParameter("D01ID1").getValue();
        String d02Id = plcParameterObject.getPlcParameter("D02ID1").getValue();
        List<BigStorageCageFeedTask> feedTaskList = bigStorageCageFeedTaskService.list(new LambdaQueryWrapper<BigStorageCageFeedTask>()
                .eq(BigStorageCageFeedTask::getTaskType, Const.BIG_STORAGE_IN_RUN)
                .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP));
        if (CollectionUtils.isNotEmpty(feedTaskList)) {
            if (feedTaskList.size() == 1) {
                computeTargetByLine(feedTaskList.get(0).getLine());
                return;
            } else {
                //比较最早一片任务的版图id及版序 求出卧转立的线路
                Integer startLine = getStartLine();
//            //计算目标格子，发送启动任务
                computeTargetByLine(startLine);
                return;
            }
        }
        String d01Id = plcParameterObject.getPlcParameter("D01ID").getValue();
        String d02Id = plcParameterObject.getPlcParameter("D02ID").getValue();
        log.info("1、获取d01Id扫描ID为：{};获取d02Id扫描ID为：{};", d01Id, d02Id);
        ;
        //两条线都有进卧转立任务，直接结束
        if (StringUtils.isNotBlank(d01Id) && StringUtils.isNotBlank(d02Id)) {
            log.info("两条线都存在进片任务，结束任务");
@@ -168,7 +183,7 @@
        computeTargetByLine(outLine);
    }

    @Scheduled(fixedDelay = 5000)
    //    @Scheduled(fixedDelay = 5000)
    public void plcToHomeEdgOutTask() {

        List<BigStorageCageOutTask> outingList = bigStorageCageOutTaskService.list(new LambdaQueryWrapper<BigStorageCageOutTask>().eq(BigStorageCageOutTask::getTaskState, Const.BIG_STORAGE_OUT_NEW));
@@ -253,17 +268,19 @@
            remainWidth = sitToUpRemainWidth.getWidth();
            glassCount = sitToUpRemainWidth.getGlassCount();
        }

        Boolean flag = Boolean.TRUE;
        //2、获取卧转立
        Integer widthFirst = edgGlassTaskInfoList.get(0).getWidth();
        if (edgGlassTaskInfoList.size() == 1) {
            if (remainWidth >= widthFirst) {
                if (glassCount <= 5) {
                    addFeedTask(glassId, line, Const.BIG_STORAGE_IN_WAIT, widthFirst);
                    return Boolean.FALSE;
                } else {
                    addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst);
                    return Boolean.TRUE;
                }
            } else {
                flag = Boolean.FALSE;
            }
        } else {
            Integer widthSecond = edgGlassTaskInfoList.get(1).getWidth();
@@ -271,20 +288,22 @@
                if (remainWidth - widthFirst - galssGap >= widthSecond) {
                    if (glassCount <= carMaxSize - 1) {
                        addFeedTask(glassId, line, Const.BIG_STORAGE_IN_WAIT, widthFirst);
                        return Boolean.FALSE;
                    } else {
                        addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst);
                        return Boolean.TRUE;
                    }
                } else {
                    addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst);
                }
            } else {
                flag = Boolean.FALSE;
            }
        }
        //向plc发送进片确认
        if (flag) {
        S7object.getinstance().plccontrol.writeWord(mesAddress, (short) 1);
        }
        //记录无法放下玻璃，后续判断启动
        return Boolean.TRUE;
        return flag;
    }

    /**
@@ -332,7 +351,7 @@
        //2、去笼子内查找是否可以继续存放的笼子
        List<String> glassIds = taskList.stream().map(BigStorageCageFeedTask::getGlassId).collect(Collectors.toList());
        List<GlassInfo> glassInfos = glassInfoService.list(new LambdaQueryWrapper<GlassInfo>().in(GlassInfo::getGlassId, glassIds));
        return computeIsTemperingTargetByLine(glassInfos, taskList, line) && computeIsTemperingTargetByLine(glassInfos, taskList, line);
        return computeIsTemperingTargetByLine(glassInfos, taskList, line);
    }

    /**
@@ -368,7 +387,6 @@
            cageDetails.setState(Const.GLASS_STATE_IN);
            bigStorageCageDetailsService.save(cageDetails);
        }
        //todo:按照进片信息向打车发送进车数据
        sendTaskListToPLC(taskList, line);
        return Boolean.TRUE;
    }