修改大理片为按工程数分前后两块进片

ZengTao

2024-11-01 eb852430ce781189ca5f9f6abcf3da539464c79e

 hangzhoumesParent/moduleService/CacheVerticalGlassModule/src/main/java/com/mes/job/PlcStorageCageTask.java

@@ -127,21 +127,38 @@
        }
        //按照线路及玻璃id获取相邻两块玻璃 卧转立上的玻璃:  状态为0不操作（D01送片，0不操作，1允许送片），请求字为1， （02玻璃id为空或者卧转立未启动）
        if (!REQUEST_WORD.equals(mesD01Value) && REQUEST_WORD.equals(d01ToMES) && (StringUtils.isBlank(d02State) || !REQUEST_WORD.equals(d03State))) {
            if (!d01GlassId.equals(d01Id)) {
                judgeGlassTypeStatus(d01Id, Const.A09_OUT_TARGET_POSITION, mesD01Address);
                edgGlassTaskInfoService.update(new LambdaUpdateWrapper<EdgGlassTaskInfo>()
                        .set(EdgGlassTaskInfo::getStatus, Const.EDG_GLASS_SUCCESS).eq(EdgGlassTaskInfo::getGlassId, d01Id));
            List<BigStorageCageFeedTask> bigStorageCageFeedTasks=bigStorageCageFeedTaskService.list(
              new LambdaQueryWrapper<BigStorageCageFeedTask>()
              .gt(BigStorageCageFeedTask::getTargetSlot,0)
                    .eq(BigStorageCageFeedTask::getLine,Const.A09_OUT_TARGET_POSITION)
                      .eq(BigStorageCageFeedTask::getTaskState,Const.BIG_STORAGE_IN_UP)
            );
            if(CollectionUtils.isEmpty(bigStorageCageFeedTasks)){
                if (!d01GlassId.equals(d01Id)) {
                    judgeGlassTypeStatus(d01Id, Const.A09_OUT_TARGET_POSITION, mesD01Address);
                    edgGlassTaskInfoService.update(new LambdaUpdateWrapper<EdgGlassTaskInfo>()
                            .set(EdgGlassTaskInfo::getStatus, Const.EDG_GLASS_SUCCESS).eq(EdgGlassTaskInfo::getGlassId, d01Id));
//                d01GlassId = d01Id;
                }
            }
        }
//        状态为0不操作（D01送片，0不操作，1允许送片），请求字为1， 卧转立未启动
        if (!REQUEST_WORD.equals(mesD04Value) && REQUEST_WORD.equals(d04ToMES) && !REQUEST_WORD.equals(d05State)) {
            if (!d04GlassId.equals(d04Id)) {
                judgeGlassTypeStatus(d04Id, Const.A10_OUT_TARGET_POSITION, mesD04Address);
                edgGlassTaskInfoService.update(new LambdaUpdateWrapper<EdgGlassTaskInfo>()
                        .set(EdgGlassTaskInfo::getStatus, Const.EDG_GLASS_SUCCESS).eq(EdgGlassTaskInfo::getGlassId, d04Id));
            List<BigStorageCageFeedTask> bigStorageCageFeedTasks=bigStorageCageFeedTaskService.list(
                    new LambdaQueryWrapper<BigStorageCageFeedTask>()
                            .gt(BigStorageCageFeedTask::getTargetSlot,0)
                            .eq(BigStorageCageFeedTask::getLine,Const.A10_OUT_TARGET_POSITION)
                            .eq(BigStorageCageFeedTask::getTaskState,Const.BIG_STORAGE_IN_UP)
            );
            if(CollectionUtils.isEmpty(bigStorageCageFeedTasks)){
                if (!d04GlassId.equals(d04Id)) {
                    judgeGlassTypeStatus(d04Id, Const.A10_OUT_TARGET_POSITION, mesD04Address);
                    edgGlassTaskInfoService.update(new LambdaUpdateWrapper<EdgGlassTaskInfo>()
                            .set(EdgGlassTaskInfo::getStatus, Const.EDG_GLASS_SUCCESS).eq(EdgGlassTaskInfo::getGlassId, d04Id));
//                d04GlassId = d04Id;
                }
            }

        }
        Date endDate = new Date();
        log.info("大理片笼扫码任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
@@ -180,13 +197,26 @@
        }
        if (!REQUEST_WORD.equals(d03ToMES) && !REQUEST_WORD.equals(d05ToMES)) {
            Date endDate = new Date();
            log.info("卧转立没有送片请求，结束送片任务，任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
            log.info("卧转立第一次没有送片请求，结束送片任务，任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
            return;
        }
        if (!REQUEST_WORD.equals(d03ToMES) && !REQUEST_WORD.equals(d05ToMES)) {
            Date endDate = new Date();
            log.info("卧转立第二次没有送片请求，结束送片任务，任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
            return;
        }
//        List<Integer> lines=new ArrayList<>();
//        if(REQUEST_WORD.equals(d03ToMES)){
//            lines.add(Const.A09_OUT_TARGET_POSITION);
//        }
//        if(REQUEST_WORD.equals(d05ToMES)){
//            lines.add(Const.A10_OUT_TARGET_POSITION);
//        }
        LambdaQueryWrapper<BigStorageCageFeedTask> wrapper = new LambdaQueryWrapper<BigStorageCageFeedTask>()
                .eq(BigStorageCageFeedTask::getTaskType, Const.BIG_STORAGE_IN_RUN)
                .and(e -> e.isNull(BigStorageCageFeedTask::getTargetSlot).or().eq(BigStorageCageFeedTask::getTargetSlot, Const.OUT_TARGET_POSITION_ZERO))
                .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP);
//                .in(BigStorageCageFeedTask::getLine,lines);
        //获取可以启动卧转立的任务线路
        List<BigStorageCageFeedTask> feedTaskList = bigStorageCageFeedTaskService.list(wrapper);
        if (CollectionUtils.isNotEmpty(feedTaskList)) {
@@ -224,6 +254,8 @@
                //获取卧转立剩余宽度
                if (computeIsRun(lineFirst, lineGlassId)) {
                    computeTargetByLine(lineFirst);
                }else{
                    log.info("当前线路：{}，有扫码玻璃：{}",lineFirst,lineGlassId);
                }
            }
            Date endDate = new Date();
@@ -317,21 +349,23 @@
                //玻璃到齐包括已出片的
                //到齐，将玻璃小片数据存入钢化小片表，逻辑生成出片任务  结束
                for (TemperingLayoutDTO item : temperingLayoutDTOList) {
                    List<TemperingGlassInfo> temperingGlassInfos = glassInfoService.selectJoinList(TemperingGlassInfo.class, JoinWrappers.lambda(GlassInfo.class)
                            .selectAll(GlassInfo.class)
                            .select("-1 as state")
                            .selectAs(BigStorageCageDetails::getSlot, TemperingGlassInfo::getSlot)
                            .innerJoin(BigStorageCageDetails.class, BigStorageCageDetails::getGlassId, GlassInfo::getGlassId)
                            .eq(BigStorageCageDetails::getState, Const.GLASS_STATE_IN)
                            .eq(GlassInfo::getTemperingLayoutId, item.getTemperingLayoutId())
                            .eq(GlassInfo::getEngineerId, item.getEngineerId())
                            .orderBy(Boolean.TRUE, sequenceOrder, GlassInfo::getTemperingFeedSequence));
                    if (CollectionUtils.isNotEmpty(temperingGlassInfos)) {
                        temperingGlassInfoService.saveBatch(temperingGlassInfos);
                        computeOutMoreGlassInfo(temperingGlassInfoList, Boolean.TRUE, mesToPLCAddress);
                        Date endDate = new Date();
                        log.info("大理片笼出片任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
                        return;
                    if (redisUtil.getCacheObject("temperingengineerId").equals(item.getEngineerId())) {
                        List<TemperingGlassInfo> temperingGlassInfos = glassInfoService.selectJoinList(TemperingGlassInfo.class, JoinWrappers.lambda(GlassInfo.class)
                                .selectAll(GlassInfo.class)
                                .select("-1 as state")
                                .selectAs(BigStorageCageDetails::getSlot, TemperingGlassInfo::getSlot)
                                .innerJoin(BigStorageCageDetails.class, BigStorageCageDetails::getGlassId, GlassInfo::getGlassId)
                                .eq(BigStorageCageDetails::getState, Const.GLASS_STATE_IN)
                                .eq(GlassInfo::getTemperingLayoutId, item.getTemperingLayoutId())
                                .eq(GlassInfo::getEngineerId, item.getEngineerId())
                                .orderBy(Boolean.TRUE, sequenceOrder, GlassInfo::getTemperingFeedSequence));
                        if (CollectionUtils.isNotEmpty(temperingGlassInfos)) {
                            temperingGlassInfoService.saveBatch(temperingGlassInfos);
                            computeOutMoreGlassInfo(temperingGlassInfoList, Boolean.TRUE, mesToPLCAddress);
                            Date endDate = new Date();
                            log.info("大理片笼出片任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
                            return;
                        }
                    }
                }
            }
@@ -356,7 +390,7 @@
                            int serialNumber = 1;
                            for (BigStorageCageDetails item : list) {
                                outTasks.add(new BigStorageCageOutTask(item.getGlassId(), first.getSlot(), second.getSlot(),
                                        item.getWidth() * 10, item.getHeight() * 10, 1, serialNumber++, Const.BIG_STORAGE_OUT_NEW));
                                        item.getWidth() * 10, item.getHeight() * 10, 1, serialNumber++, Const.BIG_STORAGE_OUT_NEW, new Date()));
                            }
                            //新增调度任务
                            bigStorageCageOutTaskService.saveBatch(outTasks);
@@ -435,6 +469,16 @@
            List<BigStorageCageOutTask> outSuccessGlass = bigStorageCageOutTaskService.list(new LambdaQueryWrapper<BigStorageCageOutTask>()
                    .in(BigStorageCageOutTask::getGlassId, glassIds).in(BigStorageCageOutTask::getTaskState, Const.BIG_STORAGE_OUT_ALL));
            if (CollectionUtils.isNotEmpty(outSuccessGlass)) {
                for (BigStorageCageOutTask bigStorageCageOutTask : outSuccessGlass
                ) {
                    if (bigStorageCageOutTask.getEndSlot().equals(Const.ARTIFICIAL_OUT_TARGET_POSITION)) {
                        temperingGlassInfoService.update(
                                new LambdaUpdateWrapper<TemperingGlassInfo>()
                                        .set(TemperingGlassInfo::getState, Const.TEMPERING_END)
                                        .eq(TemperingGlassInfo::getGlassId, bigStorageCageOutTask.getGlassId())
                        );
                    }
                }
                log.info("3、获取出片已完成的玻璃信息id:{}", outSuccessGlass);
                List<UpdateBigStorageCageDTO> storageCageDTOList = outSuccessGlass.stream().map(e -> {
                    UpdateBigStorageCageDTO storageCageDTO = new UpdateBigStorageCageDTO();
@@ -515,9 +559,9 @@
                Damage damage = new Damage();
                damage.setGlassId(bigStorageCageFeedTask.getGlassId());
                damage.setLine(bigStorageCageFeedTask.getLine());
                damage.setWorkingProcedure("冷加工");
                damage.setWorkingProcedure("磨边");
                damage.setRemark("进笼前卧转立");
                damage.setStatus(0);
                damage.setStatus(1);
                damage.setType(bigStorageCageFeedTask.getTaskState());
                damageService.insertDamage(damage);
                slotList.add(bigStorageCageFeedTask.getTargetSlot());
@@ -543,9 +587,9 @@
                Damage damage = new Damage();
                damage.setGlassId(bigStorageCageOutTask.getGlassId());
                damage.setLine(bigStorageCageOutTask.getEndSlot());
                damage.setWorkingProcedure("冷加工");
                damage.setWorkingProcedure("钢化");
                damage.setRemark("出片后卧转立");
                damage.setStatus(0);
                damage.setStatus(1);
                damage.setType(bigStorageCageOutTask.getTaskState());
                damageService.insertDamage(damage);
                slotList.add(bigStorageCageOutTask.getStartSlot());
@@ -560,23 +604,170 @@
    }

    /**
     * 确认字清空
     */
    @Scheduled(fixedDelay = 300)
    public void confirmClear() {
        PlcParameterObject plcParameterObject = S7object.getinstance().PlcMesObject;
        String d01ToMES = plcParameterObject.getPlcParameter("D01ToMES").getValue();
        String d04ToMES = plcParameterObject.getPlcParameter("D04ToMES").getValue();
        String mesD01Address = plcParameterObject.getPlcParameter("MESToD01").getAddress();
        String mesD04Address = plcParameterObject.getPlcParameter("MESToD04").getAddress();
//        String d03ToMES = plcParameterObject.getPlcParameter("D03ToMES").getValue();
//        String d05ToMES = plcParameterObject.getPlcParameter("D05ToMES").getValue();
        String d03ToMES = plcParameterObject.getPlcParameter("D03Request").getValue();
        String d05ToMES = plcParameterObject.getPlcParameter("D05Request").getValue();
        String mesD03Address = plcParameterObject.getPlcParameter("MESToD03").getAddress();
        String mesD05Address = plcParameterObject.getPlcParameter("MESToD05").getAddress();
        if (!REQUEST_WORD.equals(d01ToMES)) {
            log.info("地址：{}写入0",mesD01Address);
            S7object.getinstance().plccontrol.writeWord(mesD01Address, 0);
        }
        if (!REQUEST_WORD.equals(d04ToMES)) {
            log.info("地址：{}写入0",mesD04Address);
            S7object.getinstance().plccontrol.writeWord(mesD04Address, 0);
        }
        if (!REQUEST_WORD.equals(d03ToMES)) {
            log.info("地址：{}写入0",mesD03Address);
            S7object.getinstance().plccontrol.writeWord(mesD03Address, 0);
        }
        if (!REQUEST_WORD.equals(d05ToMES)) {
            log.info("地址：{}写入0",mesD05Address);
            S7object.getinstance().plccontrol.writeWord(mesD05Address, 0);
        }
    }

    /**
     * 进片状态修改
     */
    @Scheduled(fixedDelay = 300)
    public void feedStatusUpdate() {
        PlcParameterObject plcParameterObject = S7object.getinstance().PlcMesObject;
        String mesD03Address = plcParameterObject.getPlcParameter("MESToD03").getAddress();
        String mesD05Address = plcParameterObject.getPlcParameter("MESToD05").getAddress();
        List<String> glassIds1 = new ArrayList<>();
        List<String> glassIds2 = new ArrayList<>();
        for (int i = 1; i <= 6; i++) {
            String line1GlassId = plcParameterObject.getPlcParameter("D03ID" + i).getValue();
            if (StringUtils.isNotEmpty(line1GlassId)) {
                glassIds1.add(line1GlassId);
            }
            String line2GlassId = plcParameterObject.getPlcParameter("D05ID" + i).getValue();
            if (StringUtils.isNotEmpty(line2GlassId)) {
                glassIds2.add(line2GlassId);
            }
        }
        List<BigStorageCageFeedTask> bigStorageCageFeedTasks1 = bigStorageCageFeedTaskService.list(
                new LambdaQueryWrapper<BigStorageCageFeedTask>()
                        .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_NEW)
                        .eq(BigStorageCageFeedTask::getLine, Const.A09_OUT_TARGET_POSITION)
        );
        List<BigStorageCageFeedTask> bigStorageCageFeedTasks2 = bigStorageCageFeedTaskService.list(
                new LambdaQueryWrapper<BigStorageCageFeedTask>()
                        .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_NEW)
                        .eq(BigStorageCageFeedTask::getLine, Const.A10_OUT_TARGET_POSITION)
        );
        if (CollectionUtils.isNotEmpty(bigStorageCageFeedTasks1) && CollectionUtils.isNotEmpty(glassIds1)) {
            List<String> matchingIds1 = bigStorageCageFeedTasks1.stream()
                    .map(BigStorageCageFeedTask::getGlassId)
                    .filter(glassIds1::contains)
                    .distinct()
                    .collect(Collectors.toList());
            log.info("D3id{},匹配id:{}",glassIds1,matchingIds1);
            if(CollectionUtils.isNotEmpty(matchingIds1)){
                bigStorageCageFeedTaskService.update(
                        new LambdaUpdateWrapper<BigStorageCageFeedTask>()
                                .in(BigStorageCageFeedTask::getGlassId, matchingIds1)
                                .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                                .set(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP)
                );
            }
        }
        if (CollectionUtils.isNotEmpty(bigStorageCageFeedTasks2) && CollectionUtils.isNotEmpty(glassIds2)) {
            List<String> matchingIds2 = bigStorageCageFeedTasks2.stream()
                    .map(BigStorageCageFeedTask::getGlassId)
                    .filter(glassIds2::contains)
                    .distinct()
                    .collect(Collectors.toList());
            log.info("D5id{},匹配id:{}",glassIds2,matchingIds2);
            if(CollectionUtils.isNotEmpty(matchingIds2)){
                bigStorageCageFeedTaskService.update(
                        new LambdaUpdateWrapper<BigStorageCageFeedTask>()
                                .in(BigStorageCageFeedTask::getGlassId, matchingIds2)
                                .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                                .set(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP)
                );
            }
        }
        if (CollectionUtils.isEmpty(glassIds1)) {
            S7object.getinstance().plccontrol.writeWord(mesD03Address, 0);
            log.info("{}线修改玻璃状态为3",Const.A09_OUT_TARGET_POSITION);
            bigStorageCageFeedTaskService.update(
                    new LambdaUpdateWrapper<BigStorageCageFeedTask>()
                            .eq(BigStorageCageFeedTask::getLine, Const.A09_OUT_TARGET_POSITION)
                            .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP)
                            .gt(BigStorageCageFeedTask::getTargetSlot, 0)
                            .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                            .set(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_CAR)
            );
        }
        if (CollectionUtils.isEmpty(glassIds2)) {
            S7object.getinstance().plccontrol.writeWord(mesD05Address, 0);
            log.info("{}线修改玻璃状态为3",Const.A10_OUT_TARGET_POSITION);
            bigStorageCageFeedTaskService.update(
                    new LambdaUpdateWrapper<BigStorageCageFeedTask>()
                            .eq(BigStorageCageFeedTask::getLine, Const.A10_OUT_TARGET_POSITION)
                            .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP)
                            .gt(BigStorageCageFeedTask::getTargetSlot, 0)
                            .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                            .set(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_CAR)
            );
        }
    }

    /**
     * 按照玻璃id判断玻璃状态及卧转立是否可直接启动
     */
    public Boolean judgeGlassTypeStatus(String glassId, Integer line, String mesAddress) {
        //判断此玻璃是在笼内或已生成进片任务
        BigStorageCageFeedTask bigStorageCageFeedTask = bigStorageCageFeedTaskService.getOne(
                new LambdaQueryWrapper<BigStorageCageFeedTask>()
                        .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                        .eq(BigStorageCageFeedTask::getGlassId, glassId)
        );
        BigStorageCageDetails bigStorageCageDetails = bigStorageCageDetailsService.getOne(
                new LambdaQueryWrapper<BigStorageCageDetails>()
                        .eq(BigStorageCageDetails::getGlassId, glassId)
                        .ne(BigStorageCageDetails::getState, Const.GLASS_STATE_IN)
        );
        if (bigStorageCageFeedTask != null || bigStorageCageDetails != null) {
            log.info("此玻璃存任务或已在笼内");
            return Boolean.TRUE;
        }
        //1、获取任务表中相邻玻璃
        List<EdgGlassTaskInfo> edgGlassTaskInfoList;
        edgGlassTaskInfoList = edgGlassTaskInfoService.list(new LambdaQueryWrapper<EdgGlassTaskInfo>()
                .eq(EdgGlassTaskInfo::getLine, line)
                .apply("time >= (select time from edg_glass_task_info where line='" + line + "' and glass_id = '" + glassId + "' and deleted = 0)")
                .orderByAsc(EdgGlassTaskInfo::getTime));
        if (edgGlassTaskInfoList == null) {
            log.info("线路：{}识别玻璃信息未出现在尺寸表中,获取相邻两块玻璃失败", line);
        } else {
        if (edgGlassTaskInfoList.size() == 0) {
            edgGlassTaskInfoList = edgGlassTaskInfoService.list(new QueryWrapper<EdgGlassTaskInfo>()
                    .select("Top 1 *")
                    .eq("glass_id", glassId)
            );
            log.info("在尺寸表中获取玻璃信息{}", edgGlassTaskInfoList);
            if (edgGlassTaskInfoList.size() == 0) {
                GlassInfo glassInfo = glassInfoService.getOne(
                        new LambdaQueryWrapper<GlassInfo>()
                                .eq(GlassInfo::getGlassId, glassId)
                );
                EdgGlassTaskInfo edgGlassTaskInfo = new EdgGlassTaskInfo();
                BeanUtils.copyProperties(glassInfo, edgGlassTaskInfo);
                edgGlassTaskInfo.setWidth((int) glassInfo.getWidth());
                edgGlassTaskInfo.setHeight((int) glassInfo.getHeight());
                edgGlassTaskInfoList.add(edgGlassTaskInfo);
                log.info("在玻璃信息表中获取玻璃信息{}", edgGlassTaskInfoList);
            }
        }
        Assert.isFalse(CollectionUtils.isEmpty(edgGlassTaskInfoList), "识别玻璃信息未出现在尺寸表中,获取相邻两块玻璃失败");
        //2、获取卧转立剩余宽度
@@ -637,13 +828,19 @@
        //向plc发送进片确认
        if (flag) {
            //向plc写入确认字
            int returnData = 0;
            PlcParameterObject plcParameterObject = S7object.getinstance().PlcMesObject;
            int returnData = 1;
            int count = 1;
            while (returnData == 0) {
            while (returnData != 0) {
                S7object.getinstance().plccontrol.writeWord(mesAddress, 1);
                returnData = S7object.getinstance().plccontrol.readWord(mesAddress, 1).get(0);
                log.info("进卧转立第{}次发送确认字完成，地址为：{},写入的内容为{}", count++, mesAddress, returnData);

                if (Const.A10_OUT_TARGET_POSITION.equals(line)) {
                    returnData = Integer.parseInt(plcParameterObject.getPlcParameter("D04ToMES").getValue());
                } else {
                    returnData = Integer.parseInt(plcParameterObject.getPlcParameter("D01ToMES").getValue());
                }
//                returnData = S7object.getinstance().plccontrol.readWord(mesAddress, 1).get(0);
                log.info("进卧转立第{}次发送确认字完成，地址为：{},写入的内容为{}", count++, mesAddress, 1);
            }
        }
        //记录无法放下玻璃，后续判断启动
@@ -664,6 +861,13 @@
        bigStorageCageFeedTask.setCreateTime(new Date());
        //删除理片笼表拿走/破损数据数据
        damageService.deleteByGlassId(glassId);
        Damage damage = new Damage();
        damage.setGlassId(glassId);
        damage.setWorkingProcedure("磨边");
        damage.setLine(line);
        damage.setType(1);
        damage.setRemark("进大理片");
        damageService.insertDamage(damage);
        return bigStorageCageFeedTaskService.save(bigStorageCageFeedTask);
    }

@@ -749,18 +953,54 @@
        String mesD03Address = plcMesObject.getPlcParameter("MESToD03").getAddress();
        String mesD05Address = plcMesObject.getPlcParameter("MESToD05").getAddress();
        String outLine = line.equals(Const.A09_OUT_TARGET_POSITION) ? mesD03Address : mesD05Address;
        List<String> returnData = new ArrayList<>();

        for (int i = 1; i <= taskList.size(); i++) {
            s7control.writeWord(plcMesObject.getPlcParameter("StartAddToImport" + i).getAddress(), taskList.get(i - 1).getLine());
            s7control.writeWord(plcMesObject.getPlcParameter("TargetAddToImport" + i).getAddress(), taskList.get(i - 1).getTargetSlot());
            returnData.add(taskList.get(i - 1).getGlassId());
            log.info("向plc发送第{}片玻璃已完成,起始位置是{}，目标位置是", i, taskList.get(i - 1).getLine(), taskList.get(i - 1).getTargetSlot());
        }
        int returnData = 0;
//        int returnData = 1;
        int count = 1;
        while (returnData == 0) {


        while (CollectionUtils.isNotEmpty(returnData)) {
            List<String> glassIds1 = new ArrayList<>();
            List<String> glassIds2 = new ArrayList<>();
            s7control.writeWord(outLine, 2);
            returnData = s7control.readWord(outLine, 1).get(0);
            log.info("已向plc第{}次发送进片任务确认，地址为：{},写入的内容为{}", count++, outLine, returnData);
            for (int i = 1; i <= 6; i++) {
                String line1GlassId = plcMesObject.getPlcParameter("D03ID" + i).getValue();
                if (StringUtils.isNotEmpty(line1GlassId)) {
                    glassIds1.add(line1GlassId);
                }
                String line2GlassId = plcMesObject.getPlcParameter("D05ID" + i).getValue();
                if (StringUtils.isNotEmpty(line2GlassId)) {
                    glassIds2.add(line2GlassId);
                }
            }
            if (line.equals(Const.A09_OUT_TARGET_POSITION)) {
//                returnData = Integer.parseInt(plcMesObject.getPlcParameter("D03ToMES").getValue());
                returnData = glassIds1;
            } else {
//                returnData = Integer.parseInt(plcMesObject.getPlcParameter("D05ToMES").getValue());
                returnData = glassIds2;
            }
//            returnData = s7control.readWord(outLine, 1).get(0);
            log.info("已向plc第{}次发送进片任务确认，地址为：{},写入的内容为{},读到的请求为{}", count++, outLine, 2,returnData);
        }
//        while (returnData != 0) {
//            s7control.writeWord(outLine, 2);
//            if (line.equals(Const.A09_OUT_TARGET_POSITION)) {
////                returnData = Integer.parseInt(plcMesObject.getPlcParameter("D03ToMES").getValue());
//                returnData = s7control.readWord(plcMesObject.getPlcParameter("D03Request").getAddress(), 1).get(0);
//            } else {
////                returnData = Integer.parseInt(plcMesObject.getPlcParameter("D05ToMES").getValue());
//                returnData = s7control.readWord(plcMesObject.getPlcParameter("D05Request").getAddress(), 1).get(0);
//            }
////            returnData = s7control.readWord(outLine, 1).get(0);
//            log.info("已向plc第{}次发送进片任务确认，地址为：{},写入的内容为{},读到的请求为{}", count++, outLine, 2,returnData);
//        }
    }

    /**
@@ -787,7 +1027,7 @@
                int minLength = Math.min((int) e.getWidth(), (int) e.getHeight());
                if (maxX + minLength <= xMaxSize) {
                    bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.TEMPERING_OUT_TARGET_POSITION,
                            e.getWidth() * 10, e.getHeight() * 10, 0, 0, 1));
                            e.getWidth() * 10, e.getHeight() * 10, 0, 0, 1, new Date()));
                    maxX = Math.max(maxX, e.getXCoordinate());
                } else {
                    break;
@@ -795,7 +1035,7 @@

            } else {
                bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.ARTIFICIAL_OUT_TARGET_POSITION,
                        e.getWidth() * 10, e.getHeight(), 0, 0, 1));
                        e.getWidth() * 10, e.getHeight(), 0, 0, 1, new Date()));
            }
        }
        Assert.isFalse(CollectionUtils.isEmpty(bigStorageCageOutTaskList), "未获取出片数据，结束出片任务");
@@ -825,7 +1065,7 @@
     * @param <T>
     * @return
     */
    private <T extends BigStorageCageBaseInfo> Boolean computeOutMoreGlassInfo(List<T> list, Boolean isTempering, String mesToPLCAddress) {
    public <T extends BigStorageCageBaseInfo> Boolean computeOutMoreGlassInfo(List<T> list, Boolean isTempering, String mesToPLCAddress) {
        //任务数据  获取车子存放玻璃最大数量  玻璃间隔
        List<BigStorageCageOutTask> bigStorageCageOutTaskList = new ArrayList<>();
        //打车剩余尺寸
@@ -846,7 +1086,7 @@
                int minLength = Math.min((int) e.getWidth(), (int) e.getHeight());
                if (maxX + minLength <= xMaxSize) {
                    bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.TEMPERING_OUT_TARGET_POSITION,
                            e.getWidth() * 10, e.getHeight() * 10, trainNumber, serialNumber++, 1));
                            e.getWidth() * 10, e.getHeight() * 10, trainNumber, serialNumber++, 1, new Date()));
                    maxX = Math.max(maxX, e.getXCoordinate());
                } else {
                    remainWidth = carWidth - maxLength - glassGap;
@@ -854,21 +1094,26 @@
                    serialNumber = 1;
                    maxX = e.getXCoordinate();
                    bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.TEMPERING_OUT_TARGET_POSITION,
                            e.getWidth() * 10, e.getHeight(), trainNumber, serialNumber++, 1));
                            e.getWidth() * 10, e.getHeight(), trainNumber, serialNumber++, 1, new Date()));
                }
            } else {
                bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.ARTIFICIAL_OUT_TARGET_POSITION,
                        e.getWidth() * 10, e.getHeight(), trainNumber, serialNumber++, 1));
                        e.getWidth() * 10, e.getHeight(), trainNumber, serialNumber++, 1, new Date()));
            }
        }
        Assert.isFalse(CollectionUtils.isEmpty(bigStorageCageOutTaskList), "未获取出片数据，结束出片任务");
        log.info("获取出片任务数据{}条，执行保存", bigStorageCageOutTaskList.size());
        bigStorageCageOutTaskService.saveBatch(bigStorageCageOutTaskList);
        for (BigStorageCageOutTask bigStorageCageOutTask : bigStorageCageOutTaskList
        ) {
            bigStorageCageOutTaskService.save(bigStorageCageOutTask);
        }
//        bigStorageCageOutTaskService.saveBatch(bigStorageCageOutTaskList);
        List<String> glassIds = bigStorageCageOutTaskList.stream().map(BigStorageCageOutTask::getGlassId).collect(Collectors.toList());
        log.info("将出片玻璃{}玻璃状态改为已出片", glassIds);
        bigStorageCageDetailsService.update(new LambdaUpdateWrapper<BigStorageCageDetails>()
                .set(BigStorageCageDetails::getState, Const.GLASS_STATE_OUT_ING)
                .in(BigStorageCageDetails::getGlassId, glassIds));
                .in(BigStorageCageDetails::getGlassId, glassIds)
                .ne(BigStorageCageDetails::getState, Const.GLASS_STATE_OUT));
//        int returnData = 0;
//        int count = 1;
//        while (returnData == 0) {