修改大理片为按工程数分前后两块进片

ZengTao

2024-11-01 eb852430ce781189ca5f9f6abcf3da539464c79e

 hangzhoumesParent/moduleService/CacheVerticalGlassModule/src/main/java/com/mes/job/PlcStorageCageTask.java

@@ -2,6 +2,7 @@

import cn.hutool.core.lang.Assert;
import com.baomidou.mybatisplus.core.conditions.query.LambdaQueryWrapper;
import com.baomidou.mybatisplus.core.conditions.query.QueryWrapper;
import com.baomidou.mybatisplus.core.conditions.update.LambdaUpdateWrapper;
import com.baomidou.mybatisplus.core.toolkit.CollectionUtils;
import com.github.yulichang.toolkit.JoinWrappers;
@@ -126,17 +127,38 @@
        }
        //按照线路及玻璃id获取相邻两块玻璃 卧转立上的玻璃:  状态为0不操作（D01送片，0不操作，1允许送片），请求字为1， （02玻璃id为空或者卧转立未启动）
        if (!REQUEST_WORD.equals(mesD01Value) && REQUEST_WORD.equals(d01ToMES) && (StringUtils.isBlank(d02State) || !REQUEST_WORD.equals(d03State))) {
            if (!d01GlassId.equals(d01Id)) {
                judgeGlassTypeStatus(d01Id, Const.A09_OUT_TARGET_POSITION, mesD01Address);
                d01GlassId = d01Id;
            List<BigStorageCageFeedTask> bigStorageCageFeedTasks=bigStorageCageFeedTaskService.list(
              new LambdaQueryWrapper<BigStorageCageFeedTask>()
              .gt(BigStorageCageFeedTask::getTargetSlot,0)
                    .eq(BigStorageCageFeedTask::getLine,Const.A09_OUT_TARGET_POSITION)
                      .eq(BigStorageCageFeedTask::getTaskState,Const.BIG_STORAGE_IN_UP)
            );
            if(CollectionUtils.isEmpty(bigStorageCageFeedTasks)){
                if (!d01GlassId.equals(d01Id)) {
                    judgeGlassTypeStatus(d01Id, Const.A09_OUT_TARGET_POSITION, mesD01Address);
                    edgGlassTaskInfoService.update(new LambdaUpdateWrapper<EdgGlassTaskInfo>()
                            .set(EdgGlassTaskInfo::getStatus, Const.EDG_GLASS_SUCCESS).eq(EdgGlassTaskInfo::getGlassId, d01Id));
//                d01GlassId = d01Id;
                }
            }
        }
//        状态为0不操作（D01送片，0不操作，1允许送片），请求字为1， 卧转立未启动
        if (!REQUEST_WORD.equals(mesD04Value) && REQUEST_WORD.equals(d04ToMES) && !REQUEST_WORD.equals(d05State)) {
            if (!d04GlassId.equals(d04Id)) {
                judgeGlassTypeStatus(d04Id, Const.A10_OUT_TARGET_POSITION, mesD04Address);
                d04GlassId = d04Id;
            List<BigStorageCageFeedTask> bigStorageCageFeedTasks=bigStorageCageFeedTaskService.list(
                    new LambdaQueryWrapper<BigStorageCageFeedTask>()
                            .gt(BigStorageCageFeedTask::getTargetSlot,0)
                            .eq(BigStorageCageFeedTask::getLine,Const.A10_OUT_TARGET_POSITION)
                            .eq(BigStorageCageFeedTask::getTaskState,Const.BIG_STORAGE_IN_UP)
            );
            if(CollectionUtils.isEmpty(bigStorageCageFeedTasks)){
                if (!d04GlassId.equals(d04Id)) {
                    judgeGlassTypeStatus(d04Id, Const.A10_OUT_TARGET_POSITION, mesD04Address);
                    edgGlassTaskInfoService.update(new LambdaUpdateWrapper<EdgGlassTaskInfo>()
                            .set(EdgGlassTaskInfo::getStatus, Const.EDG_GLASS_SUCCESS).eq(EdgGlassTaskInfo::getGlassId, d04Id));
//                d04GlassId = d04Id;
                }
            }

        }
        Date endDate = new Date();
        log.info("大理片笼扫码任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
@@ -146,11 +168,28 @@
    public void plcToHomeEdgFreeCarTask() {
        Date startDate = new Date();
        log.info("大理片笼空车进片任务开始执行时间：{}", startDate);
        PlcParameterObject plcMesObject = S7object.getinstance().PlcMesObject;
        String mesD03Address = plcMesObject.getPlcParameter("MESToD03").getValue();
        String mesD05Address = plcMesObject.getPlcParameter("MESToD05").getValue();
        log.info("MESToD03:{},MESToD05:{}", mesD03Address, mesD05Address);
        if ("2".equals(mesD03Address) || "2".equals(mesD05Address)) {
            log.info("有启动信号，MESToD03:{},MESToD05:{}", mesD03Address, mesD05Address);
        }
        PlcParameterObject plcParameterObject = S7object.getinstance().PlcMesObject;
        String e01Status = plcParameterObject.getPlcParameter("E01State").getValue();
        String d03ToMES = plcParameterObject.getPlcParameter("D03ToMES").getValue();
        String d05ToMES = plcParameterObject.getPlcParameter("D05ToMES").getValue();
        log.info("执行空车送片任务，获取到的大车状态为{}，卧转立状态分别为d03:{}，d05:{}", e01Status, d03ToMES, d05ToMES);
        List<BigStorageCageFeedTask> bigStorageCageFeedTasks = bigStorageCageFeedTaskService.list(
                new LambdaQueryWrapper<BigStorageCageFeedTask>()
                        .ne(BigStorageCageFeedTask::getTargetSlot, 0)
                        .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
        );
        if (bigStorageCageFeedTasks.size() > 0) {
            Date endDate = new Date();
            log.info("大车有正在执行的任务{}，结束送片任务，任务结束时间：{}，共耗时：{}ms,结束扫码任务", bigStorageCageFeedTasks, endDate, endDate.getTime() - startDate.getTime());
            return;
        }
        if (REQUEST_WORD.equals(e01Status)) {
            Date endDate = new Date();
            log.info("进片大车非空闲，结束送片任务，任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
@@ -158,13 +197,26 @@
        }
        if (!REQUEST_WORD.equals(d03ToMES) && !REQUEST_WORD.equals(d05ToMES)) {
            Date endDate = new Date();
            log.info("卧转立没有送片请求，结束送片任务，任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
            log.info("卧转立第一次没有送片请求，结束送片任务，任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
            return;
        }
        if (!REQUEST_WORD.equals(d03ToMES) && !REQUEST_WORD.equals(d05ToMES)) {
            Date endDate = new Date();
            log.info("卧转立第二次没有送片请求，结束送片任务，任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
            return;
        }
//        List<Integer> lines=new ArrayList<>();
//        if(REQUEST_WORD.equals(d03ToMES)){
//            lines.add(Const.A09_OUT_TARGET_POSITION);
//        }
//        if(REQUEST_WORD.equals(d05ToMES)){
//            lines.add(Const.A10_OUT_TARGET_POSITION);
//        }
        LambdaQueryWrapper<BigStorageCageFeedTask> wrapper = new LambdaQueryWrapper<BigStorageCageFeedTask>()
                .eq(BigStorageCageFeedTask::getTaskType, Const.BIG_STORAGE_IN_RUN)
                .and(e -> e.isNull(BigStorageCageFeedTask::getTargetSlot).or().eq(BigStorageCageFeedTask::getTargetSlot, Const.OUT_TARGET_POSITION_ZERO))
                .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP);
//                .in(BigStorageCageFeedTask::getLine,lines);
        //获取可以启动卧转立的任务线路
        List<BigStorageCageFeedTask> feedTaskList = bigStorageCageFeedTaskService.list(wrapper);
        if (CollectionUtils.isNotEmpty(feedTaskList)) {
@@ -202,6 +254,8 @@
                //获取卧转立剩余宽度
                if (computeIsRun(lineFirst, lineGlassId)) {
                    computeTargetByLine(lineFirst);
                }else{
                    log.info("当前线路：{}，有扫码玻璃：{}",lineFirst,lineGlassId);
                }
            }
            Date endDate = new Date();
@@ -244,7 +298,7 @@
        log.info("大理片笼空车进片任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
    }

    @Scheduled(fixedDelay = 2000)
    @Scheduled(fixedDelay = 10000)
    public void plcToHomeEdgOutTask() {
        Date startDate = new Date();
        log.info("大理片笼空车进片任务开始执行时间：{}", startDate);
@@ -271,16 +325,20 @@
                    .orderBy(Boolean.TRUE, sequenceOrder, TemperingGlassInfo::getTemperingFeedSequence));
            if (CollectionUtils.isNotEmpty(temperingGlassInfoList)) {
                log.info("有正在出片的钢化任务");
                computeOutGlassInfo(temperingGlassInfoList, Boolean.TRUE, mesToPLCAddress);
                computeOutMoreGlassInfo(temperingGlassInfoList, Boolean.TRUE, mesToPLCAddress);
                Date endDate = new Date();
                log.info("大理片笼出片任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
                return;
            }
            //是否有人工下片任务   有直接出
//            List<BigStorageCageDetails> artificialList = bigStorageCageDetailsService.list(new LambdaQueryWrapper<BigStorageCageDetails>()
//                    .eq(BigStorageCageDetails::getState, Const.GLASS_STATE_ARTIFICIAL).orderByDesc(BigStorageCageDetails::getWidth));
            List<BigStorageCageDetails> artificialList = bigStorageCageDetailsService.list(new LambdaQueryWrapper<BigStorageCageDetails>()
                    .eq(BigStorageCageDetails::getState, Const.GLASS_STATE_ARTIFICIAL).orderByDesc(BigStorageCageDetails::getWidth));
                    .eq(BigStorageCageDetails::getState, Const.GLASS_STATE_ARTIFICIAL)
                    .orderByAsc(BigStorageCageDetails::getSlot)
                    .orderByDesc(BigStorageCageDetails::getId));
            if (CollectionUtils.isNotEmpty(artificialList)) {
                computeOutGlassInfo(artificialList, Boolean.FALSE, mesToPLCAddress);
                computeOutMoreGlassInfo(artificialList, Boolean.FALSE, mesToPLCAddress);
                Date endDate = new Date();
                log.info("大理片笼出片任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
                return;
@@ -291,21 +349,23 @@
                //玻璃到齐包括已出片的
                //到齐，将玻璃小片数据存入钢化小片表，逻辑生成出片任务  结束
                for (TemperingLayoutDTO item : temperingLayoutDTOList) {
                    List<TemperingGlassInfo> temperingGlassInfos = glassInfoService.selectJoinList(TemperingGlassInfo.class, JoinWrappers.lambda(GlassInfo.class)
                            .selectAll(GlassInfo.class)
                            .select("-1 as state")
                            .selectAs(BigStorageCageDetails::getSlot, TemperingGlassInfo::getSlot)
                            .innerJoin(BigStorageCageDetails.class, BigStorageCageDetails::getGlassId, GlassInfo::getGlassId)
                            .eq(BigStorageCageDetails::getState, Const.GLASS_STATE_IN)
                            .eq(GlassInfo::getTemperingLayoutId, item.getTemperingLayoutId())
                            .eq(GlassInfo::getEngineerId, item.getEngineerId())
                            .orderBy(Boolean.TRUE, sequenceOrder, GlassInfo::getTemperingFeedSequence));
                    if (CollectionUtils.isNotEmpty(temperingGlassInfos)) {
                        temperingGlassInfoService.saveBatch(temperingGlassInfos);
                        computeOutGlassInfo(temperingGlassInfoList, Boolean.TRUE, mesToPLCAddress);
                        Date endDate = new Date();
                        log.info("大理片笼出片任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
                        return;
                    if (redisUtil.getCacheObject("temperingengineerId").equals(item.getEngineerId())) {
                        List<TemperingGlassInfo> temperingGlassInfos = glassInfoService.selectJoinList(TemperingGlassInfo.class, JoinWrappers.lambda(GlassInfo.class)
                                .selectAll(GlassInfo.class)
                                .select("-1 as state")
                                .selectAs(BigStorageCageDetails::getSlot, TemperingGlassInfo::getSlot)
                                .innerJoin(BigStorageCageDetails.class, BigStorageCageDetails::getGlassId, GlassInfo::getGlassId)
                                .eq(BigStorageCageDetails::getState, Const.GLASS_STATE_IN)
                                .eq(GlassInfo::getTemperingLayoutId, item.getTemperingLayoutId())
                                .eq(GlassInfo::getEngineerId, item.getEngineerId())
                                .orderBy(Boolean.TRUE, sequenceOrder, GlassInfo::getTemperingFeedSequence));
                        if (CollectionUtils.isNotEmpty(temperingGlassInfos)) {
                            temperingGlassInfoService.saveBatch(temperingGlassInfos);
                            computeOutMoreGlassInfo(temperingGlassInfoList, Boolean.TRUE, mesToPLCAddress);
                            Date endDate = new Date();
                            log.info("大理片笼出片任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
                            return;
                        }
                    }
                }
            }
@@ -330,7 +390,7 @@
                            int serialNumber = 1;
                            for (BigStorageCageDetails item : list) {
                                outTasks.add(new BigStorageCageOutTask(item.getGlassId(), first.getSlot(), second.getSlot(),
                                        item.getWidth() * 10, item.getHeight() * 10, 1, serialNumber++, Const.BIG_STORAGE_OUT_NEW));
                                        item.getWidth() * 10, item.getHeight() * 10, 1, serialNumber++, Const.BIG_STORAGE_OUT_NEW, new Date()));
                            }
                            //新增调度任务
                            bigStorageCageOutTaskService.saveBatch(outTasks);
@@ -346,15 +406,15 @@
                    }
                }
            }
            //向plc写入确认字
            int returnData = 0;
            int count = 1;
            while (returnData == 0) {
                log.info("已向plc第{}次送协议", count);
                S7object.getinstance().plccontrol.writeWord(mesToPLCAddress, 1);
                returnData = S7object.getinstance().plccontrol.readWord(mesToPLCAddress, 1).get(0);
                log.info("已向plc第{}次发送出片任务确认，地址为：{},写入的内容为{}", count++, mesToPLCAddress, returnData);
            }
//            //向plc写入确认字
//            int returnData = 0;
//            int count = 1;
//            while (returnData == 0) {
//                log.info("已向plc第{}次送协议", count);
//                S7object.getinstance().plccontrol.writeWord(mesToPLCAddress, 1);
//                returnData = S7object.getinstance().plccontrol.readWord(mesToPLCAddress, 1).get(0);
//                log.info("已向plc第{}次发送出片任务确认，地址为：{},写入的内容为{}", count++, mesToPLCAddress, returnData);
//            }
            Date endDate = new Date();
            log.info("大理片笼出片任务结束时间：{}，共耗时：{}ms,结束扫码任务", endDate, endDate.getTime() - startDate.getTime());
            return;
@@ -409,6 +469,16 @@
            List<BigStorageCageOutTask> outSuccessGlass = bigStorageCageOutTaskService.list(new LambdaQueryWrapper<BigStorageCageOutTask>()
                    .in(BigStorageCageOutTask::getGlassId, glassIds).in(BigStorageCageOutTask::getTaskState, Const.BIG_STORAGE_OUT_ALL));
            if (CollectionUtils.isNotEmpty(outSuccessGlass)) {
                for (BigStorageCageOutTask bigStorageCageOutTask : outSuccessGlass
                ) {
                    if (bigStorageCageOutTask.getEndSlot().equals(Const.ARTIFICIAL_OUT_TARGET_POSITION)) {
                        temperingGlassInfoService.update(
                                new LambdaUpdateWrapper<TemperingGlassInfo>()
                                        .set(TemperingGlassInfo::getState, Const.TEMPERING_END)
                                        .eq(TemperingGlassInfo::getGlassId, bigStorageCageOutTask.getGlassId())
                        );
                    }
                }
                log.info("3、获取出片已完成的玻璃信息id:{}", outSuccessGlass);
                List<UpdateBigStorageCageDTO> storageCageDTOList = outSuccessGlass.stream().map(e -> {
                    UpdateBigStorageCageDTO storageCageDTO = new UpdateBigStorageCageDTO();
@@ -476,49 +546,56 @@
        log.info("大理片笼破损玻璃清除任务开始执行时间：{}", startDate);
        //获取进片任务表中状态为破损的数据
        List<BigStorageCageFeedTask> inDamageTaskInfoList = bigStorageCageFeedTaskService.list(new LambdaQueryWrapper<BigStorageCageFeedTask>()
                .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_DAMAGE));
                .in(BigStorageCageFeedTask::getTaskState, Const.GLASS_STATE_DAMAGE_TAKE));
        if (CollectionUtils.isNotEmpty(inDamageTaskInfoList)) {
            log.info("获取进片任务表中破损的玻璃信息{}", inDamageTaskInfoList);
            bigStorageCageFeedTaskService.remove(new LambdaQueryWrapper<BigStorageCageFeedTask>().eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_DAMAGE));
            bigStorageCageFeedTaskService.remove(new LambdaQueryWrapper<BigStorageCageFeedTask>().in(BigStorageCageFeedTask::getTaskState, Const.GLASS_STATE_DAMAGE_TAKE));
            //理片笼详情表数据状态更新
            bigStorageCageDetailsService.update(new LambdaUpdateWrapper<BigStorageCageDetails>()
                    .set(BigStorageCageDetails::getState, Const.GLASS_STATE_DAMAGE).in(BigStorageCageDetails::getGlassId, inDamageTaskInfoList.stream().map(BigStorageCageFeedTask::getGlassId).collect(Collectors.toList())));
            bigStorageCageDetailsService.remove(new LambdaQueryWrapper<BigStorageCageDetails>()
                    .eq(BigStorageCageDetails::getState, Const.GLASS_STATE_NEW).in(BigStorageCageDetails::getGlassId, inDamageTaskInfoList.stream().map(BigStorageCageFeedTask::getGlassId).collect(Collectors.toList())));
            //将破损信息新增入破损表
            List<Integer> slotList = new ArrayList<>();
            for (BigStorageCageFeedTask bigStorageCageFeedTask : inDamageTaskInfoList) {
                Damage damage = new Damage();
                damage.setGlassId(bigStorageCageFeedTask.getGlassId());
                damage.setLine(bigStorageCageFeedTask.getLine());
                damage.setWorkingProcedure("冷加工");
                damage.setWorkingProcedure("磨边");
                damage.setRemark("进笼前卧转立");
                damage.setStatus(2);
                damage.setStatus(1);
                damage.setType(bigStorageCageFeedTask.getTaskState());
                damageService.insertDamage(damage);
                slotList.add(bigStorageCageFeedTask.getTargetSlot());
            }
            //更新格子剩余宽度
            updateSlotRemainBySlots(slotList);
            log.info("进片任务执行完成");
        }
        //获取出片任务表中状态为破损的数据
        List<BigStorageCageOutTask> outDamageTaskInfoList = bigStorageCageOutTaskService.list(new LambdaQueryWrapper<BigStorageCageOutTask>()
                .eq(BigStorageCageOutTask::getTaskState, Const.BIG_STORAGE_OUT_DAMAGE));
                .in(BigStorageCageOutTask::getTaskState, Const.GLASS_STATE_DAMAGE_TAKE));
        if (CollectionUtils.isNotEmpty(outDamageTaskInfoList)) {
            log.info("获取出片任务表中破损的玻璃信息{}", outDamageTaskInfoList);
            bigStorageCageOutTaskService.remove(new LambdaQueryWrapper<BigStorageCageOutTask>().eq(BigStorageCageOutTask::getTaskState, Const.BIG_STORAGE_IN_DAMAGE));
            bigStorageCageOutTaskService.remove(new LambdaQueryWrapper<BigStorageCageOutTask>().in(BigStorageCageOutTask::getTaskState, Const.GLASS_STATE_DAMAGE_TAKE));
            List<String> glassIdList = outDamageTaskInfoList.stream().map(BigStorageCageOutTask::getGlassId).collect(Collectors.toList());
            //移除钢化下片表数据
            temperingGlassInfoService.update(new LambdaUpdateWrapper<TemperingGlassInfo>().in(TemperingGlassInfo::getGlassId, glassIdList)
                    .set(TemperingGlassInfo::getState, Const.TEMPERING_DAMAGE));
            //理片笼详情表数据状态更新
            bigStorageCageDetailsService.update(new LambdaUpdateWrapper<BigStorageCageDetails>()
                    .set(BigStorageCageDetails::getState, Const.GLASS_STATE_DAMAGE).in(BigStorageCageDetails::getGlassId, glassIdList));

            temperingGlassInfoService.remove(new LambdaQueryWrapper<TemperingGlassInfo>().in(TemperingGlassInfo::getGlassId, glassIdList));
            //理片笼详情表数据状态删除
            bigStorageCageDetailsService.remove(new LambdaQueryWrapper<BigStorageCageDetails>().in(BigStorageCageDetails::getGlassId, glassIdList));
            //将破损信息新增入破损表
            List<Integer> slotList = new ArrayList<>();
            for (BigStorageCageOutTask bigStorageCageOutTask : outDamageTaskInfoList) {
                Damage damage = new Damage();
                damage.setGlassId(bigStorageCageOutTask.getGlassId());
                damage.setLine(bigStorageCageOutTask.getEndSlot());
                damage.setWorkingProcedure("冷加工");
                damage.setWorkingProcedure("钢化");
                damage.setRemark("出片后卧转立");
                damage.setStatus(2);
                damage.setStatus(1);
                damage.setType(bigStorageCageOutTask.getTaskState());
                damageService.insertDamage(damage);
                slotList.add(bigStorageCageOutTask.getStartSlot());
            }
            //更新格子剩余宽度
            updateSlotRemainBySlots(slotList);
            log.info("出片任务执行完成");
        }
        Date endDate = new Date();
@@ -527,14 +604,171 @@
    }

    /**
     * 确认字清空
     */
    @Scheduled(fixedDelay = 300)
    public void confirmClear() {
        PlcParameterObject plcParameterObject = S7object.getinstance().PlcMesObject;
        String d01ToMES = plcParameterObject.getPlcParameter("D01ToMES").getValue();
        String d04ToMES = plcParameterObject.getPlcParameter("D04ToMES").getValue();
        String mesD01Address = plcParameterObject.getPlcParameter("MESToD01").getAddress();
        String mesD04Address = plcParameterObject.getPlcParameter("MESToD04").getAddress();
//        String d03ToMES = plcParameterObject.getPlcParameter("D03ToMES").getValue();
//        String d05ToMES = plcParameterObject.getPlcParameter("D05ToMES").getValue();
        String d03ToMES = plcParameterObject.getPlcParameter("D03Request").getValue();
        String d05ToMES = plcParameterObject.getPlcParameter("D05Request").getValue();
        String mesD03Address = plcParameterObject.getPlcParameter("MESToD03").getAddress();
        String mesD05Address = plcParameterObject.getPlcParameter("MESToD05").getAddress();
        if (!REQUEST_WORD.equals(d01ToMES)) {
            log.info("地址：{}写入0",mesD01Address);
            S7object.getinstance().plccontrol.writeWord(mesD01Address, 0);
        }
        if (!REQUEST_WORD.equals(d04ToMES)) {
            log.info("地址：{}写入0",mesD04Address);
            S7object.getinstance().plccontrol.writeWord(mesD04Address, 0);
        }
        if (!REQUEST_WORD.equals(d03ToMES)) {
            log.info("地址：{}写入0",mesD03Address);
            S7object.getinstance().plccontrol.writeWord(mesD03Address, 0);
        }
        if (!REQUEST_WORD.equals(d05ToMES)) {
            log.info("地址：{}写入0",mesD05Address);
            S7object.getinstance().plccontrol.writeWord(mesD05Address, 0);
        }
    }

    /**
     * 进片状态修改
     */
    @Scheduled(fixedDelay = 300)
    public void feedStatusUpdate() {
        PlcParameterObject plcParameterObject = S7object.getinstance().PlcMesObject;
        String mesD03Address = plcParameterObject.getPlcParameter("MESToD03").getAddress();
        String mesD05Address = plcParameterObject.getPlcParameter("MESToD05").getAddress();
        List<String> glassIds1 = new ArrayList<>();
        List<String> glassIds2 = new ArrayList<>();
        for (int i = 1; i <= 6; i++) {
            String line1GlassId = plcParameterObject.getPlcParameter("D03ID" + i).getValue();
            if (StringUtils.isNotEmpty(line1GlassId)) {
                glassIds1.add(line1GlassId);
            }
            String line2GlassId = plcParameterObject.getPlcParameter("D05ID" + i).getValue();
            if (StringUtils.isNotEmpty(line2GlassId)) {
                glassIds2.add(line2GlassId);
            }
        }
        List<BigStorageCageFeedTask> bigStorageCageFeedTasks1 = bigStorageCageFeedTaskService.list(
                new LambdaQueryWrapper<BigStorageCageFeedTask>()
                        .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_NEW)
                        .eq(BigStorageCageFeedTask::getLine, Const.A09_OUT_TARGET_POSITION)
        );
        List<BigStorageCageFeedTask> bigStorageCageFeedTasks2 = bigStorageCageFeedTaskService.list(
                new LambdaQueryWrapper<BigStorageCageFeedTask>()
                        .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_NEW)
                        .eq(BigStorageCageFeedTask::getLine, Const.A10_OUT_TARGET_POSITION)
        );
        if (CollectionUtils.isNotEmpty(bigStorageCageFeedTasks1) && CollectionUtils.isNotEmpty(glassIds1)) {
            List<String> matchingIds1 = bigStorageCageFeedTasks1.stream()
                    .map(BigStorageCageFeedTask::getGlassId)
                    .filter(glassIds1::contains)
                    .distinct()
                    .collect(Collectors.toList());
            log.info("D3id{},匹配id:{}",glassIds1,matchingIds1);
            if(CollectionUtils.isNotEmpty(matchingIds1)){
                bigStorageCageFeedTaskService.update(
                        new LambdaUpdateWrapper<BigStorageCageFeedTask>()
                                .in(BigStorageCageFeedTask::getGlassId, matchingIds1)
                                .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                                .set(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP)
                );
            }
        }
        if (CollectionUtils.isNotEmpty(bigStorageCageFeedTasks2) && CollectionUtils.isNotEmpty(glassIds2)) {
            List<String> matchingIds2 = bigStorageCageFeedTasks2.stream()
                    .map(BigStorageCageFeedTask::getGlassId)
                    .filter(glassIds2::contains)
                    .distinct()
                    .collect(Collectors.toList());
            log.info("D5id{},匹配id:{}",glassIds2,matchingIds2);
            if(CollectionUtils.isNotEmpty(matchingIds2)){
                bigStorageCageFeedTaskService.update(
                        new LambdaUpdateWrapper<BigStorageCageFeedTask>()
                                .in(BigStorageCageFeedTask::getGlassId, matchingIds2)
                                .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                                .set(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP)
                );
            }
        }
        if (CollectionUtils.isEmpty(glassIds1)) {
            S7object.getinstance().plccontrol.writeWord(mesD03Address, 0);
            log.info("{}线修改玻璃状态为3",Const.A09_OUT_TARGET_POSITION);
            bigStorageCageFeedTaskService.update(
                    new LambdaUpdateWrapper<BigStorageCageFeedTask>()
                            .eq(BigStorageCageFeedTask::getLine, Const.A09_OUT_TARGET_POSITION)
                            .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP)
                            .gt(BigStorageCageFeedTask::getTargetSlot, 0)
                            .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                            .set(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_CAR)
            );
        }
        if (CollectionUtils.isEmpty(glassIds2)) {
            S7object.getinstance().plccontrol.writeWord(mesD05Address, 0);
            log.info("{}线修改玻璃状态为3",Const.A10_OUT_TARGET_POSITION);
            bigStorageCageFeedTaskService.update(
                    new LambdaUpdateWrapper<BigStorageCageFeedTask>()
                            .eq(BigStorageCageFeedTask::getLine, Const.A10_OUT_TARGET_POSITION)
                            .eq(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_UP)
                            .gt(BigStorageCageFeedTask::getTargetSlot, 0)
                            .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                            .set(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_CAR)
            );
        }
    }

    /**
     * 按照玻璃id判断玻璃状态及卧转立是否可直接启动
     */
    public Boolean judgeGlassTypeStatus(String glassId, Integer line, String mesAddress) {
        //判断此玻璃是在笼内或已生成进片任务
        BigStorageCageFeedTask bigStorageCageFeedTask = bigStorageCageFeedTaskService.getOne(
                new LambdaQueryWrapper<BigStorageCageFeedTask>()
                        .lt(BigStorageCageFeedTask::getTaskState, Const.BIG_STORAGE_IN_SLOT)
                        .eq(BigStorageCageFeedTask::getGlassId, glassId)
        );
        BigStorageCageDetails bigStorageCageDetails = bigStorageCageDetailsService.getOne(
                new LambdaQueryWrapper<BigStorageCageDetails>()
                        .eq(BigStorageCageDetails::getGlassId, glassId)
                        .ne(BigStorageCageDetails::getState, Const.GLASS_STATE_IN)
        );
        if (bigStorageCageFeedTask != null || bigStorageCageDetails != null) {
            log.info("此玻璃存任务或已在笼内");
            return Boolean.TRUE;
        }
        //1、获取任务表中相邻玻璃
        List<EdgGlassTaskInfo> edgGlassTaskInfoList = edgGlassTaskInfoService.list(new LambdaQueryWrapper<EdgGlassTaskInfo>()
        List<EdgGlassTaskInfo> edgGlassTaskInfoList;
        edgGlassTaskInfoList = edgGlassTaskInfoService.list(new LambdaQueryWrapper<EdgGlassTaskInfo>()
                .eq(EdgGlassTaskInfo::getLine, line)
                .apply("time >= (select time from edg_glass_task_info where glass_id = '" + glassId + "')")
                .apply("time >= (select time from edg_glass_task_info where line='" + line + "' and glass_id = '" + glassId + "' and deleted = 0)")
                .orderByAsc(EdgGlassTaskInfo::getTime));
        if (edgGlassTaskInfoList.size() == 0) {
            edgGlassTaskInfoList = edgGlassTaskInfoService.list(new QueryWrapper<EdgGlassTaskInfo>()
                    .select("Top 1 *")
                    .eq("glass_id", glassId)
            );
            log.info("在尺寸表中获取玻璃信息{}", edgGlassTaskInfoList);
            if (edgGlassTaskInfoList.size() == 0) {
                GlassInfo glassInfo = glassInfoService.getOne(
                        new LambdaQueryWrapper<GlassInfo>()
                                .eq(GlassInfo::getGlassId, glassId)
                );
                EdgGlassTaskInfo edgGlassTaskInfo = new EdgGlassTaskInfo();
                BeanUtils.copyProperties(glassInfo, edgGlassTaskInfo);
                edgGlassTaskInfo.setWidth((int) glassInfo.getWidth());
                edgGlassTaskInfo.setHeight((int) glassInfo.getHeight());
                edgGlassTaskInfoList.add(edgGlassTaskInfo);
                log.info("在玻璃信息表中获取玻璃信息{}", edgGlassTaskInfoList);
            }
        }
        Assert.isFalse(CollectionUtils.isEmpty(edgGlassTaskInfoList), "识别玻璃信息未出现在尺寸表中,获取相邻两块玻璃失败");
        //2、获取卧转立剩余宽度
        BigStorageDTO sitToUpRemainWidth = bigStorageCageFeedTaskService.querySitToUpRemainWidth(line);
@@ -557,7 +791,11 @@
                if (glassCount < inCarMaxSize) {
                    addFeedTask(glassId, line, Const.BIG_STORAGE_IN_WAIT, widthFirst, heightFirst);
                } else {
                    addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst, heightFirst);
                    if (glassCount < inCarMaxSize + 1) {
                        addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst, heightFirst);
                    } else {
                        return Boolean.FALSE;
                    }
                }
            } else {
                flag = Boolean.FALSE;
@@ -568,12 +806,20 @@
            if (remainWidth >= widthFirst) {
                if (remainWidth - widthFirst - glassGap >= widthSecond) {
                    if (glassCount < inCarMaxSize) {
                        addFeedTask(glassId, line, Const.BIG_STORAGE_IN_WAIT, widthFirst, heightSecond);
                        addFeedTask(glassId, line, Const.BIG_STORAGE_IN_WAIT, widthFirst, heightFirst);
                    } else {
                        addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst, heightSecond);
                        if (glassCount < inCarMaxSize + 1) {
                            addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst, heightFirst);
                        } else {
                            return Boolean.FALSE;
                        }
                    }
                } else {
                    addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst, heightSecond);
                    if (glassCount < inCarMaxSize + 1) {
                        addFeedTask(glassId, line, Const.BIG_STORAGE_IN_RUN, widthFirst, heightFirst);
                    } else {
                        return Boolean.FALSE;
                    }
                }
            } else {
                flag = Boolean.FALSE;
@@ -582,13 +828,19 @@
        //向plc发送进片确认
        if (flag) {
            //向plc写入确认字
            int returnData = 0;
            PlcParameterObject plcParameterObject = S7object.getinstance().PlcMesObject;
            int returnData = 1;
            int count = 1;
            while (returnData == 0) {
            while (returnData != 0) {
                S7object.getinstance().plccontrol.writeWord(mesAddress, 1);
                returnData = S7object.getinstance().plccontrol.readWord(mesAddress, 1).get(0);
                log.info("进卧转立第{}次发送确认字完成，地址为：{},写入的内容为{}", count++, mesAddress, returnData);

                if (Const.A10_OUT_TARGET_POSITION.equals(line)) {
                    returnData = Integer.parseInt(plcParameterObject.getPlcParameter("D04ToMES").getValue());
                } else {
                    returnData = Integer.parseInt(plcParameterObject.getPlcParameter("D01ToMES").getValue());
                }
//                returnData = S7object.getinstance().plccontrol.readWord(mesAddress, 1).get(0);
                log.info("进卧转立第{}次发送确认字完成，地址为：{},写入的内容为{}", count++, mesAddress, 1);
            }
        }
        //记录无法放下玻璃，后续判断启动
@@ -607,6 +859,15 @@
        bigStorageCageFeedTask.setWidth(width);
        bigStorageCageFeedTask.setHeight(height);
        bigStorageCageFeedTask.setCreateTime(new Date());
        //删除理片笼表拿走/破损数据数据
        damageService.deleteByGlassId(glassId);
        Damage damage = new Damage();
        damage.setGlassId(glassId);
        damage.setWorkingProcedure("磨边");
        damage.setLine(line);
        damage.setType(1);
        damage.setRemark("进大理片");
        damageService.insertDamage(damage);
        return bigStorageCageFeedTaskService.save(bigStorageCageFeedTask);
    }

@@ -666,9 +927,9 @@
            BeanUtils.copyProperties(info, cageDetails);
            //2、获取目标格子信息
            BigStorageDTO bigStorageDTO = bigStorageCageDetailsService.queryTargetSlotByTempering(info);
            //3、更新大理片笼表剩余宽度（更新大理片笼剩余尺寸移到进笼完成后执行）
//            bigStorageCageService.update(new LambdaUpdateWrapper<BigStorageCage>().set(BigStorageCage::getRemainWidth, bigStorageDTO.getWidth() - info.getWidth() - glassGap)
//                    .eq(BigStorageCage::getSlot, bigStorageDTO.getSlot()));
            //3、临时更新格子的剩余尺寸：防止相邻玻璃进同一格子造成剩余尺寸不足，玻璃越界的情况，任务完成后再次更新大理片笼表剩余宽度（按照笼内玻璃数量更新大理片笼剩余尺寸）
            bigStorageCageService.update(new LambdaUpdateWrapper<BigStorageCage>().set(BigStorageCage::getRemainWidth, bigStorageDTO.getWidth() - Math.max(info.getWidth(), info.getHeight()) - glassGap)
                    .eq(BigStorageCage::getSlot, bigStorageDTO.getSlot()));
            //4、更新进片任务表，目标格子及状态（状态改为2 电气扫到自行处理）  遇到问题：无法批量更新，批量更新无法走指定从库
            e.setTargetSlot(bigStorageDTO.getSlot());
            bigStorageCageFeedTaskService.updateById(e);
@@ -679,6 +940,7 @@
            cageDetails.setDeviceId(bigStorageDTO.getDeviceId());
            cageDetails.setGap(glassGap);
            bigStorageCageDetailsService.save(cageDetails);

        }
        sendTaskListToPLC(taskList, line);
        return Boolean.TRUE;
@@ -691,54 +953,89 @@
        String mesD03Address = plcMesObject.getPlcParameter("MESToD03").getAddress();
        String mesD05Address = plcMesObject.getPlcParameter("MESToD05").getAddress();
        String outLine = line.equals(Const.A09_OUT_TARGET_POSITION) ? mesD03Address : mesD05Address;
        List<String> returnData = new ArrayList<>();

        for (int i = 1; i <= taskList.size(); i++) {
            s7control.writeWord(plcMesObject.getPlcParameter("StartAddToImport" + i).getAddress(), taskList.get(i - 1).getLine());
            s7control.writeWord(plcMesObject.getPlcParameter("TargetAddToImport" + i).getAddress(), taskList.get(i - 1).getTargetSlot());
            log.info("向plc发送第{}片玻璃已完成", i);
            returnData.add(taskList.get(i - 1).getGlassId());
            log.info("向plc发送第{}片玻璃已完成,起始位置是{}，目标位置是", i, taskList.get(i - 1).getLine(), taskList.get(i - 1).getTargetSlot());
        }
        int returnData = 0;
//        int returnData = 1;
        int count = 1;
        while (returnData == 0) {


        while (CollectionUtils.isNotEmpty(returnData)) {
            List<String> glassIds1 = new ArrayList<>();
            List<String> glassIds2 = new ArrayList<>();
            s7control.writeWord(outLine, 2);
            returnData = s7control.readWord(outLine, 1).get(0);
            log.info("已向plc第{}次发送出片任务确认，地址为：{},写入的内容为{}", count++, outLine, returnData);
            for (int i = 1; i <= 6; i++) {
                String line1GlassId = plcMesObject.getPlcParameter("D03ID" + i).getValue();
                if (StringUtils.isNotEmpty(line1GlassId)) {
                    glassIds1.add(line1GlassId);
                }
                String line2GlassId = plcMesObject.getPlcParameter("D05ID" + i).getValue();
                if (StringUtils.isNotEmpty(line2GlassId)) {
                    glassIds2.add(line2GlassId);
                }
            }
            if (line.equals(Const.A09_OUT_TARGET_POSITION)) {
//                returnData = Integer.parseInt(plcMesObject.getPlcParameter("D03ToMES").getValue());
                returnData = glassIds1;
            } else {
//                returnData = Integer.parseInt(plcMesObject.getPlcParameter("D05ToMES").getValue());
                returnData = glassIds2;
            }
//            returnData = s7control.readWord(outLine, 1).get(0);
            log.info("已向plc第{}次发送进片任务确认，地址为：{},写入的内容为{},读到的请求为{}", count++, outLine, 2,returnData);
        }
//        while (returnData != 0) {
//            s7control.writeWord(outLine, 2);
//            if (line.equals(Const.A09_OUT_TARGET_POSITION)) {
////                returnData = Integer.parseInt(plcMesObject.getPlcParameter("D03ToMES").getValue());
//                returnData = s7control.readWord(plcMesObject.getPlcParameter("D03Request").getAddress(), 1).get(0);
//            } else {
////                returnData = Integer.parseInt(plcMesObject.getPlcParameter("D05ToMES").getValue());
//                returnData = s7control.readWord(plcMesObject.getPlcParameter("D05Request").getAddress(), 1).get(0);
//            }
////            returnData = s7control.readWord(outLine, 1).get(0);
//            log.info("已向plc第{}次发送进片任务确认，地址为：{},写入的内容为{},读到的请求为{}", count++, outLine, 2,returnData);
//        }
    }

    /**
     * 出片一次仅生成一车玻璃
     *
     * @param list
     * @param isTempering
     * @param mesToPLCAddress
     * @param <T>
     * @return
     */
    private <T extends BigStorageCageBaseInfo> Boolean computeOutGlassInfo(List<T> list, Boolean isTempering, String mesToPLCAddress) {
        //任务数据  获取车子存放玻璃最大数量  玻璃间隔
        List<BigStorageCageOutTask> bigStorageCageOutTaskList = new ArrayList<>();
        //打车剩余尺寸
        Integer remainWidth = carWidth;
        int trainNumber = 1;
        int serialNumber = 1;
        int maxX = 0;
        for (T e : list) {
            int maxLength = Math.max((int) e.getWidth(), (int) e.getHeight());
            if (bigStorageCageOutTaskList.size() >= outCarMaxSize || maxLength > remainWidth) {
                remainWidth = carWidth;
                trainNumber = trainNumber + 1;
                serialNumber = 1;
                maxX = 0;
                continue;
            if (bigStorageCageOutTaskList.size() >= outCarMaxSize || Math.max((int) e.getWidth(), (int) e.getHeight()) > remainWidth) {
                break;
            }
            remainWidth = remainWidth - maxLength - glassGap;
            remainWidth = remainWidth - Math.max((int) e.getWidth(), (int) e.getHeight()) - glassGap;
            if (isTempering) {
                int minLength = Math.min((int) e.getWidth(), (int) e.getHeight());
                if (maxX + minLength <= xMaxSize) {
                    bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.TEMPERING_OUT_TARGET_POSITION,
                            e.getWidth() * 10, e.getHeight() * 10, trainNumber, serialNumber++, 1));
                            e.getWidth() * 10, e.getHeight() * 10, 0, 0, 1, new Date()));
                    maxX = Math.max(maxX, e.getXCoordinate());
                } else {
                    remainWidth = carWidth;
                    trainNumber = trainNumber + 1;
                    serialNumber = 1;
                    maxX = 0;
                    continue;
                    break;
                }

            } else {
                bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.ARTIFICIAL_OUT_TARGET_POSITION,
                        e.getWidth() * 10, e.getHeight(), trainNumber, serialNumber++, 1));
                        e.getWidth() * 10, e.getHeight(), 0, 0, 1, new Date()));
            }
        }
        Assert.isFalse(CollectionUtils.isEmpty(bigStorageCageOutTaskList), "未获取出片数据，结束出片任务");
@@ -759,6 +1056,74 @@
        return Boolean.TRUE;
    }

    /**
     * 出片一次生成一炉玻璃
     *
     * @param list
     * @param isTempering
     * @param mesToPLCAddress
     * @param <T>
     * @return
     */
    public <T extends BigStorageCageBaseInfo> Boolean computeOutMoreGlassInfo(List<T> list, Boolean isTempering, String mesToPLCAddress) {
        //任务数据  获取车子存放玻璃最大数量  玻璃间隔
        List<BigStorageCageOutTask> bigStorageCageOutTaskList = new ArrayList<>();
        //打车剩余尺寸
        Integer remainWidth = carWidth;
        int trainNumber = 1;
        int serialNumber = 1;
        int maxX = 0;
        for (T e : list) {
            int maxLength = Math.max((int) e.getWidth(), (int) e.getHeight());
            if (serialNumber > outCarMaxSize || maxLength > remainWidth) {
                remainWidth = carWidth;
                trainNumber = trainNumber + 1;
                serialNumber = 1;
                maxX = 0;
            }
            remainWidth = remainWidth - maxLength - glassGap;
            if (isTempering) {
                int minLength = Math.min((int) e.getWidth(), (int) e.getHeight());
                if (maxX + minLength <= xMaxSize) {
                    bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.TEMPERING_OUT_TARGET_POSITION,
                            e.getWidth() * 10, e.getHeight() * 10, trainNumber, serialNumber++, 1, new Date()));
                    maxX = Math.max(maxX, e.getXCoordinate());
                } else {
                    remainWidth = carWidth - maxLength - glassGap;
                    trainNumber = trainNumber + 1;
                    serialNumber = 1;
                    maxX = e.getXCoordinate();
                    bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.TEMPERING_OUT_TARGET_POSITION,
                            e.getWidth() * 10, e.getHeight(), trainNumber, serialNumber++, 1, new Date()));
                }
            } else {
                bigStorageCageOutTaskList.add(new BigStorageCageOutTask(e.getGlassId(), e.getSlot(), Const.ARTIFICIAL_OUT_TARGET_POSITION,
                        e.getWidth() * 10, e.getHeight(), trainNumber, serialNumber++, 1, new Date()));
            }
        }
        Assert.isFalse(CollectionUtils.isEmpty(bigStorageCageOutTaskList), "未获取出片数据，结束出片任务");
        log.info("获取出片任务数据{}条，执行保存", bigStorageCageOutTaskList.size());
        for (BigStorageCageOutTask bigStorageCageOutTask : bigStorageCageOutTaskList
        ) {
            bigStorageCageOutTaskService.save(bigStorageCageOutTask);
        }
//        bigStorageCageOutTaskService.saveBatch(bigStorageCageOutTaskList);
        List<String> glassIds = bigStorageCageOutTaskList.stream().map(BigStorageCageOutTask::getGlassId).collect(Collectors.toList());
        log.info("将出片玻璃{}玻璃状态改为已出片", glassIds);
        bigStorageCageDetailsService.update(new LambdaUpdateWrapper<BigStorageCageDetails>()
                .set(BigStorageCageDetails::getState, Const.GLASS_STATE_OUT_ING)
                .in(BigStorageCageDetails::getGlassId, glassIds)
                .ne(BigStorageCageDetails::getState, Const.GLASS_STATE_OUT));
//        int returnData = 0;
//        int count = 1;
//        while (returnData == 0) {
//            S7object.getinstance().plccontrol.writeWord(mesToPLCAddress, 1);
//            returnData = S7object.getinstance().plccontrol.readWord(mesToPLCAddress, 1).get(0);
//            log.info("已向plc第{}次发送出片任务确认，地址为：{},写入的内容为{}", count++, mesToPLCAddress, returnData);
//        }
        return Boolean.TRUE;
    }

    public void updateSlotRemainBySlots(List<Integer> slotList) {
        //获取格子内所有的玻璃信息
        List<BigStorageCageDetails> inSlotGlassList = bigStorageCageDetailsService.list(new LambdaQueryWrapper<BigStorageCageDetails>()
@@ -768,7 +1133,7 @@
        if (CollectionUtils.isNotEmpty(inSlotGlassList)) {
            //存在  将格子内的玻璃分别进行更新
            slotRemainMap = inSlotGlassList.stream()
                    .collect(Collectors.groupingBy(BigStorageCageDetails::getSlot, Collectors.summingDouble(item -> item.getWidth() + glassGap)));
                    .collect(Collectors.groupingBy(BigStorageCageDetails::getSlot, Collectors.summingDouble(item -> Math.max(item.getWidth(), item.getHeight()) + glassGap)));
            slotRemainMap.forEach((e, v) -> {
                double remainWidth = slotWidth - v >= 0 ? slotWidth - v : 0;
                bigStorageCageService.update(new LambdaUpdateWrapper<BigStorageCage>().set(BigStorageCage::getRemainWidth, remainWidth)