1.json文件优化 增加配置项：【1.触发点；2.逻辑线程时间间隔】 2.优化处理代码 【1.去除多余日志输出点；2.两个设备json文件进行根据...

严智鑫

2025-06-17 560303799978bd141dc1e9553b7607012591fb42

1.json文件优化  增加配置项：【1.触发点；2.逻辑线程时间间隔】
2.优化处理代码 【1.去除多余日志输出点；2.两个设备json文件进行根据codeId进行关联；3.调整代码先后顺序】
3.json文件路径提出jar包外，可在设备表上配置上配置路径。因原方式修改地址json 后需重新打包，实际调试中传递jar包比较浪费时间

 JsonFile/Edg.json

New file
@@ -0,0 +1,52 @@
{
  "parameters": [
    {
      "serialNumber": 0,
      "content": "PLC请求",
      "codeId": "plcRequest",
      "plcDataType": "Word",
      "fontLocation": 0,
      "length": 2,
      "ratio": 1,
      "scale": 10,
      "address": "S7.DB8.DBW0",
      "remarks": ""
    },
    {
      "serialNumber": 1,
      "content": "Mes发送字",
      "codeId": "mesSend",
      "plcDataType": "Word",
      "fontLocation": 18,
      "length": 2,
      "ratio": 1,
      "scale": 10,
      "address": "S7.DB8.DBW2",
      "remarks": ""
    },
    {
      "serialNumber": 2,
      "content": "MES发送长",
      "codeId": "width",
      "plcDataType": "Word",
      "fontLocation": 20,
      "length": 2,
      "ratio": 11,
      "scale": 11,
      "address": "S7.DB8.DBW4",
      "remarks": ""
    },
    {
      "serialNumber": 11,
      "content": "MES发送宽",
      "codeId": "height",
      "plcDataType": "Word",
      "fontLocation": 22,
      "length": 2,
      "ratio": 12,
      "scale": 12,
      "address":"S7.DB8.DBW6",
      "remarks": ""
    }
  ]
}

 JsonFile/EdgLogicHttp.json

New file
@@ -0,0 +1,141 @@
{
  "logics": [
    {
      "name":"请求逻辑",
      "sequence":"1",
      "apiConfigBefore": {
        "codeId": "loadSelect",
        "type": "Http",
        "address": "http://localhost:8082/account/testApi",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [1]
        },
        {
          "codeId": "mesSend",
          "value": [0]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "fixed": true,
          "value": 1
        },
        {
          "codeId": "width",
          "fixed": false,
          "value": 1
        }
      ,
        {
          "codeId": "height",
          "fixed": false,
          "value": 2
        }
      ]
    },
    {
      "name":"请求清空",
      "sequence":"2",
      "apiConfigBefore": {
        "codeId": "",
        "type": "View",
        "address": "viewname",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [0]
        },
        {
          "codeId": "mesSend",
          "value": [1]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "width",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "height",
          "fixed": true,
          "value": 0
        }
      ]
    },
    {
      "name":"完成逻辑",
      "sequence":"3",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "View",
        "address": "viewname",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcComplete",
          "value": [1]
        },
        {
          "codeId": "mesComplete",
          "value": [0]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesComplete",
          "fixed": true,
          "value": 1
        }
      ]
    },
    {
      "name":"完成清空",
      "sequence":"4",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "View",
        "address": "viewname",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcComplete",
          "value": [0]
        },
        {
          "codeId": "mesComplete",
          "value": [1,2,3]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesComplete",
          "fixed": true,
          "value": 0
        }
      ]
    }
  ]
}

 JsonFile/EdgLogicProcedure.json

New file
@@ -0,0 +1,92 @@
{
  "logics": [
    {
      "name":"请求逻辑",
      "sequence":"1",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "Procedure",
        "address": "testProcedure",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [1]
        },
        {
          "codeId": "mesSend",
          "value": [0]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "address": "S7.DB8.DBW2",
          "fixed": true,
          "value": 1,
          "plcDataType": "int",
          "length": 2
        },
        {
          "codeId": "width",
          "address": "S7.DB8.DBW4",
          "fixed": false,
          "value": 1,
          "plcDataType": "int",
          "length": 2
        }
      ,
        {
          "codeId": "height",
          "address": "S7.DB8.DBW6",
          "fixed": false,
          "value": 2,
          "plcDataType": "int",
          "length": 2
        }
      ]
    },
    {
      "name":"请求清空",
      "sequence":"2",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "View",
        "address": "viewname",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [0]
        },
        {
          "codeId": "mesSend",
          "value": [1]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "width",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "height",
          "fixed": true,
          "value": 0
        }
      ]
    }
  ]
}

 JsonFile/EdgLogicView.json

New file
@@ -0,0 +1,89 @@
{
  "logics": [
    {
      "name":"请求逻辑",
      "sequence":"1",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "View",
        "address": "viewname"
      },
      "apiConfigAfter": {
        "codeId": "edgSelect",
        "type": "Http",
        "address": "http://localhost:8082/account/testApi",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [1]
        },
        {
          "codeId": "mesSend",
          "value": [0]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "address": "S7.DB8.DBW2",
          "fixed": true,
          "value": 1,
          "plcDataType": "int",
          "length": 2
        },
        {
          "codeId": "width",
          "address": "S7.DB8.DBW4",
          "fixed": false,
          "value": 1,
          "plcDataType": "int",
          "length": 2
        }
      ,
        {
          "codeId": "height",
          "address": "S7.DB8.DBW6",
          "fixed": false,
          "value": 2,
          "plcDataType": "int",
          "length": 2
        }
      ]
    },
    {
      "name":"请求清空",
      "sequence":"2",
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [0]
        },
        {
          "codeId": "mesSend",
          "value": [1]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "width",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "height",
          "fixed": true,
          "value": 0
        }
      ]
    }
  ]
}

 JsonFile/ShelfModbusTcp.json

copy from ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/shelf.json
copy to JsonFile/ShelfModbusTcp.json

 JsonFile/ShelfS7.json

copy from ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/shelfS7.json
copy to JsonFile/ShelfS7.json

 ShangHaiMesParent/JsonFile/PlcCacheGlass.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcCleaning.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcEdging.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcFlipSlice.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcLamination.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcLoad.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcLoad2.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcMarking.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcRotate.json

File was deleted

 ShangHaiMesParent/JsonFile/PlcSilkScreen.json

File was deleted

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/java/com/mes/AppRunnerConfig.java

@@ -34,15 +34,19 @@
        //1.根据数据库设备表加载数据  得到全部 设备信息
        List<Machine> listMachine = machineService.getMachineConfig();
        //2.根据设备配置进行加载多线程
        for (int i = 1; i < listMachine.size(); i++)
            try {
                Machine machine = listMachine.get(i);
                Thread thread = new Thread(new MachineThread(machine, api));
                thread.start();
                thread.setName(machine.getName());
            } catch (Exception e) {
                // TODO: handle exception
                System.out.println("多线程异常！！");
        //2.根据设备配置进行加载多线程
        for (int i = 0; i < listMachine.size(); i++){
            if("ON".equals(listMachine.get(i).getOpen()) ){
                try {
                    Machine machine = listMachine.get(i);
                    Thread thread = new Thread(new MachineThread(machine, api));
                    thread.start();
                    thread.setName(machine.getName());
                } catch (Exception e) {
                    // TODO: handle exception
                    System.out.println("多线程异常！！");
                }
            }
        }
    }
}

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/java/com/mes/common/ReadFile.java

@@ -2,21 +2,24 @@

import com.alibaba.fastjson.JSONException;
import com.alibaba.fastjson.JSONObject;
import org.springframework.core.io.ClassPathResource;
import org.springframework.core.io.Resource;

import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.*;

public class ReadFile {
    // 读取Json文件内容
    public static JSONObject readJson(String fileName) throws IOException {
    public static JSONObject readJson(String fileUrl) throws IOException {
        // 资源路径（相对于resources根目录）
        String resourcePath = "jsonFile/"+fileName;
        //String resourcePath = "jsonFile/"+fileName;
        //String resourcePath =  System.getProperty("user.dir") + "/JsonFile/"+fileName;
        String resourcePath =  fileUrl;
        // 获取类加载器
        ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
        //ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
        // 读取资源
        try (InputStream inputStream = classLoader.getResourceAsStream(resourcePath)) {

        try (InputStream inputStream = new FileInputStream(resourcePath)) {
        //try (InputStream inputStream = classLoader.getResourceAsStream(resourcePath)) {
            if (inputStream == null) {
                throw new IOException("资源未找到: " + resourcePath);
            }

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/java/com/mes/connect/IndustrialInterface/Api.java

@@ -2,6 +2,11 @@

import com.alibaba.fastjson.JSON;
import com.baomidou.dynamic.datasource.annotation.DS;
import com.fasterxml.jackson.databind.ObjectMapper;
import com.mes.connect.entity.ApiConfig;
import com.mes.connect.entity.LogicItem;
import com.mes.connect.entity.PlcParameters;
import lombok.extern.slf4j.Slf4j;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.http.*;
import org.springframework.jdbc.core.JdbcTemplate;
@@ -19,7 +24,9 @@
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import java.util.stream.Collectors;

@Slf4j
@Service
public class Api implements ApiService {

@@ -37,6 +44,47 @@
        this.restTemplate = restTemplate;
        this.jdbcTemplate = jdbcTemplate;
    }

    /**
     * 发送调用接口请求 ，根据逻辑配置调用
     *
     * @param apiConfig 逻辑配置参数
     * @param plcParameters plc参数
     * @return 响应内容按行分割的数组
     */
    public List<String> callApi(ApiConfig apiConfig, PlcParameters plcParameters){
        try{
            List<String> result=new ArrayList<>();
            String connectType=apiConfig.getType();
            String connectAddress=apiConfig.getAddress();
            Map<String,Object> map=new HashMap<String,Object>();
            map.put("apiConfig",apiConfig);
            map.put("plcParameter",plcParameters);
            switch (connectType) {
                case "Http":
                    result= this.httpApi(connectAddress,map);
                    break;
                case "View": // 视图/表
                    result= this.viewApi(connectAddress,map);
                    break;
                case "Procedure": // 存储过程
                    result= this.procedureAPI(connectAddress,map);
                    break;
                default:
                    log.warn("不支持的连接类型: {}", connectType);
                    return null; // 不支持的方式
            }
            return result;
        }catch (Exception e){
            log.error("调用接口失败: {}", e.getMessage(), e);
        }
        return null;
    }





    /**
     * 发送HTTP请求，支持GET和POST方法
     *
@@ -52,8 +100,11 @@
            UriComponentsBuilder builder = UriComponentsBuilder.fromHttpUrl(url);
            // 处理响应
            String responseBody;
            String method=data.get("method").toString();
            data.remove("method");
            ObjectMapper mapper = new ObjectMapper();
            Map<String, Object> apiConfig= mapper.convertValue(data.get("apiConfig"), Map.class);
            Map<String, Object> parameters= mapper.convertValue(apiConfig.get("parameters"), Map.class);
            String method=parameters.get("method").toString();
            data.remove("parameters");
            if ("GET".equals(method)) {
                // GET请求：将参数添加到URL查询参数中
                if (data != null) {
@@ -97,12 +148,14 @@
    }
    @DS("mes_machine")
    @Override
    public List<String> viewApi(String viewName, Map<String, Object> params) {
    public List<String> viewApi(String viewName, Map<String, Object> parameters) {
        // 验证视图名是否合法，防止SQL注入
        if (!isValidViewName(viewName)) {
            throw new IllegalArgumentException("无效的视图名称");
        }

        ObjectMapper mapper = new ObjectMapper();
        Map<String, Object> apiConfig= mapper.convertValue(parameters.get("apiConfig"), Map.class);
        Map<String, Object> params= mapper.convertValue(apiConfig.get("parameters"), Map.class);
        // 使用预编译语句构建查询
        StringBuilder sql = new StringBuilder("SELECT * FROM " + viewName);
        MapSqlParameterSource paramSource = new MapSqlParameterSource();
@@ -130,66 +183,67 @@
    }
    @DS("jiumumes")
    @Override
    public List<String> procedureAPI(String procedureName, Map<String, Object> params,Map<String, Object> outParams) {
    public List<String> procedureAPI(String procedureName, Map<String, Object> params) {
        try {
            if (!isValidProcedureName(procedureName)) {
                throw new IllegalArgumentException("无效的存储过程名称");
            }

            ObjectMapper mapper = new ObjectMapper();
            Map<String, Object> apiConfig= mapper.convertValue(params.get("apiConfig"), Map.class);
            Map<String, Object> parameters=mapper.convertValue(apiConfig.get("parameters"), Map.class);
            Map<String, Object> inParams= mapper.convertValue(parameters.get("inParams"), Map.class);
            Map<String, Object> outParams= mapper.convertValue(parameters.get("outParams"), Map.class);
            // 创建新的 Map 并合并
            Map<String, Object> mergedMap = new HashMap<>(inParams);
            mergedMap.putAll(outParams);
            SimpleJdbcCall jdbcCall = new SimpleJdbcCall(jdbcTemplate)
                    .withProcedureName(procedureName)
                    .withoutProcedureColumnMetaDataAccess();

            if (params != null) {
                for (Map.Entry<String, Object> entry : params.entrySet()) {
                    // 确定参数类型
                    int sqlType = getSqlType(entry.getValue());

                    // 检查是否为输出参数
                    if (outParams != null && outParams.containsKey(entry.getKey())) {
                        Object outParamInfo = outParams.get(entry.getKey());
                        int outSqlType;

                        // 从输出参数信息中获取SQL类型
                        if (outParamInfo instanceof Integer) {
                            outSqlType = (Integer) outParamInfo;
                        } else if (outParamInfo instanceof Map) {
                            // 假设Map中包含"sqlType"键
                            Map<String, Object> outParamMap = (Map<String, Object>) outParamInfo;
                            outSqlType = (Integer) outParamMap.getOrDefault("sqlType", sqlType);
                        } else {
                            // 默认使用输入参数的SQL类型
                            outSqlType = sqlType;
                        }

                        // 使用指定的SQL类型作为输出参数
                        jdbcCall.declareParameters(
                                new SqlOutParameter(entry.getKey(), outSqlType)
                        );
                    } else {
                        // 作为输入参数
                        jdbcCall.declareParameters(
                                new SqlParameter(entry.getKey(), sqlType)
                        );
                    }
                }
            for (Map.Entry<String, Object> entry : inParams.entrySet()) {
                int sqlType = getSqlType(entry.getValue());
                // 作为输入参数
                jdbcCall.declareParameters(
                        new SqlParameter(entry.getKey(), sqlType)
                );
            }
            for (Map.Entry<String, Object> entry : outParams.entrySet()) {
                int outSqlType=12;
//                int sqlType = getSqlType(entry.getValue());
//                Object outParamInfo = outParams.get(entry.getKey());
//                // 从输出参数信息中获取SQL类型
//                if (outParamInfo instanceof Integer) {
//                    outSqlType = (Integer) outParamInfo;
//                } else if (outParamInfo instanceof Map) {
//                    // 假设Map中包含"sqlType"键
//                    Map<String, Object> outParamMap = (Map<String, Object>) outParamInfo;
//                    outSqlType = (Integer) outParamMap.getOrDefault("sqlType", sqlType);
//                } else {
//                    // 默认使用输入参数的SQL类型
//                    outSqlType = sqlType;
//                }

                // 使用指定的SQL类型作为输出参数
                jdbcCall.declareParameters(
                        new SqlOutParameter(entry.getKey(), outSqlType)
                );
            }
            // 执行存储过程并获取结果
            Map<String, Object> result = jdbcCall.execute(params);
            Map<String, Object> result = jdbcCall.execute(mergedMap);

            // 处理输出参数
            if (outParams != null) {
                for (String paramName : outParams.keySet()) {
                    if (result.containsKey(paramName)) {
                        // 将输出参数的值放回原参数Map中
                        params.put(paramName, result.get(paramName));
                        outParams.put(paramName, result.get(paramName));
                    }
                }
            }

            List<String> outParamsValues = outParams.values().stream()
                    .map(value -> value != null ? value.toString() : "null")
                    .collect(Collectors.toList());
            // 返回结果信息
            return null;
            return outParamsValues;
        } catch (Exception e) {
            return null;
        }

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/java/com/mes/connect/IndustrialInterface/ApiService.java

@@ -35,10 +35,9 @@
    /**
     * 调用存储过程
     * @param procedureName 存储过程名称
     * @param params 输入参数
     * @param outParams 输出参数
     * @param params 参数
     * @return 存储过程执行结果
     */
    List<String> procedureAPI(String procedureName, Map<String, Object> params,Map<String, Object> outParams);
    List<String> procedureAPI(String procedureName, Map<String, Object> params);

}

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/java/com/mes/connect/Thread/MachineThread.java

@@ -24,10 +24,7 @@
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import java.util.*;
import java.util.concurrent.ConcurrentHashMap;
import java.util.stream.Collectors;

@@ -55,6 +52,24 @@
        this.api = api;
        this.logicConfig = JsonConversion.jsonToObjectByJackson(ReadFile.readJson(machine.getLogicFile()).toString(), LogicConfig.class);
        this.plcParameters = JsonConversion.jsonToObjectByJackson(ReadFile.readJson(machine.getMachineFile()).toString(), PlcParameters.class);
        this.logicConfig.getLogics();
        this.plcParameters.Initialization();
        for (LogicItem logicItem : logicConfig.getLogics()) {
            if (logicItem.getLogicInterval()==0){
                //默认1000毫秒
                logicItem.setLogicInterval(1000);
            }
            for (Logic logic : logicItem.getLogic()) {
                logic.setAddress(this.plcParameters.getMap().get(logic.getCodeId()).getAddress());
                logic.setPlcDataType(this.plcParameters.getMap().get(logic.getCodeId()).getPlcDataType());
            }
            for (ReturnValue returnValue : logicItem.getReturnValue()) {
                returnValue.setAddress(this.plcParameters.getMap().get(returnValue.getCodeId()).getAddress());
                returnValue.setPlcDataType(this.plcParameters.getMap().get(returnValue.getCodeId()).getPlcDataType());
            }
        }


        switch (machine.getProtocolType().getName()) {
            case "ModbusTcp":
                client = new ModbusTcpClient(machine.getIp(), machine.getPort(), 1);
@@ -72,54 +87,23 @@
                log.error("无效的协议类型: {}", protocolType);
                throw new IllegalArgumentException("无效的协议类型: " + protocolType);
        }
        if (client != null) {
            client.connect();
            boolean connected = client.isConnected();
            if (!connected) {
                log.error("连接PLC失败: {}", machine.getIp());
            }
        }
    }

    @Override
    public void run() {
        log.info("MachineThread启动，设备IP: {}", machine.getIp());
        if (client == null || !client.isConnected()) {
            log.error("PLC客户端未连接，线程退出");
            return;
        }

        plcParameters.Initialization();

        try {
            // 初始化读取PLC参数
            readPlcParameter();
        } catch (Exception e) {
            log.error("初始化读取PLC参数失败: {}", e.getMessage(), e);
            return;
        }
        // 为每个逻辑项创建并启动子线程
        //startLogicThread(logicConfig.getLogics().get(0));
        for (LogicItem logicItem : logicConfig.getLogics()) {
            startLogicThread(logicItem);
            //startLogicThread(logicConfig.getLogics().get(0));
        }

        // 主线程持续运行，定期读取PLC参数并监控连接状态
        while (running) {
            try {
                // 读取PLC参数，为逻辑处理提供最新数据
                readPlcParameter();

                // 检查PLC连接状态
                if (!client.isConnected()) {
                    log.warn("PLC连接断开，尝试重新连接");
                    log.info("PLC尝试连接... 设备IP: {}", machine.getIp());
                    tryReconnect();
                }

                // 检查逻辑线程状态，重启已终止的线程
                // 读取PLC参数，为逻辑处理提供最新数据
                this.readPlcParameter();
                plcParameters.Initialization();
                // 检查逻辑线程状态，开启/重启 线程
                checkLogicThreadsStatus();

                // 等待下一个执行周期
                Thread.sleep(mainThreadInterval);
            } catch (InterruptedException e) {
@@ -140,7 +124,6 @@
                }
            }
        }

        // 线程退出前关闭所有资源
        shutdown();
        log.info("MachineThread已退出，设备IP: {}", machine.getIp());
@@ -148,28 +131,22 @@

    // 为指定逻辑项创建并启动子线程
    private void startLogicThread(LogicItem logicItem) {
        String logicId = logicItem.getName(); // 假设每个LogicItem有唯一ID
        String logicId = this.machine.getId()+" - "+this.machine.getName()+" - "+ logicItem.getName(); // 假设每个LogicItem有唯一ID
        if (logicThreads.containsKey(logicId) && logicThreads.get(logicId).isAlive()) {
            log.warn("逻辑项线程已在运行: {}", logicId);
            return;
        }

        // 设置运行标志
        logicRunningFlags.put(logicId, true);

        // 创建并启动线程
        Thread thread = new Thread(() -> {
            log.info("逻辑项线程启动: {}", logicId);

            // 逻辑项子线程持续运行的循环
            while (logicRunningFlags.getOrDefault(logicId, false)) {
                try {
                    // 执行实际业务逻辑
                    basicsLogic(logicItem);

                    // 根据逻辑项的执行频率设置等待时间，默认1000ms
                    int logicInterval = 1000;
                    Thread.sleep(logicInterval);
                    Thread.sleep(logicItem.getLogicInterval());
                } catch (InterruptedException e) {
                    log.info("逻辑项线程被中断，准备退出: {}", logicId);
                    logicRunningFlags.put(logicId, false);
@@ -186,31 +163,23 @@
                    }
                }
            }

            log.info("逻辑项线程已退出: {}", logicId);
        });

        // 设置线程名称
        thread.setName("Logic-" + logicId);

        thread.setName(logicId);
        // 存储线程引用
        logicThreads.put(logicId, thread);

        // 启动线程
        thread.start();
        log.info("已启动逻辑项线程: {}", logicId);
        //log.info("已启动逻辑项线程: {}", logicId);
    }

    // 检查逻辑线程状态，重启已终止的线程
    private void checkLogicThreadsStatus() {
        for (LogicItem logicItem : logicConfig.getLogics()) {
            String logicId = logicItem.getName();
            String logicId = this.machine.getId()+" - "+this.machine.getName()+" - "+ logicItem.getName();
            Thread thread = logicThreads.get(logicId);

            // 如果线程不存在或已终止且运行标志为true，则重启线程
            if ((thread == null || !thread.isAlive()) &&
                    logicRunningFlags.getOrDefault(logicId, false)) {
                log.warn("逻辑项线程已终止，准备重启: {}", logicId);
            if ((thread == null || !thread.isAlive()) &&!logicRunningFlags.getOrDefault(logicId, false)) {
                startLogicThread(logicItem);
            }
        }
@@ -220,9 +189,9 @@
    private void tryReconnect() {
        if (client != null) {
            try {
                log.info("尝试重新连接PLC: {}", machine.getIp());
                client.disconnect();
                Thread.sleep(2000);
                client.connect();
                boolean reconnected = client.isConnected();
                if (reconnected) {
                    log.info("PLC重新连接成功: {}", machine.getIp());
@@ -238,7 +207,6 @@
    // 关闭线程前的清理工作
    public void shutdown() {
        running = false;

        // 停止所有逻辑线程
        for (String logicId : logicRunningFlags.keySet()) {
            logicRunningFlags.put(logicId, false);
@@ -247,7 +215,6 @@
                thread.interrupt();
            }
        }

        // 等待所有逻辑线程结束
        for (String logicId : logicThreads.keySet()) {
            Thread thread = logicThreads.get(logicId);
@@ -292,37 +259,24 @@
                }
            }
            if (isEqual){
                List<String> result=new ArrayList<>();
                log.info("满足条件:{}",logicItem.getName());
                //3.查询此逻辑下需要返回给PLC的数据 result可接收  HTTP接口,视图,存储过程 等  如下
                try{
                    String connectType=logicItem.getConnectType();
                    String connectAddress=logicItem.getConnectAddress();
                    Map map=new HashMap();
                    switch (connectType) {
                        case "Http":
                            map.put("method","POST");
                            map.put("plcParameter",plcParameters);
                            result= api.httpApi(connectAddress,map);
                            log.info("接口返回内容：{}",result);
                            break;
                        case "View": // 视图/表
                            result= api.viewApi(connectAddress,map);
                            break;
                        case "Procedure": // 存储过程
                            //result= api.procedureAPI(connectAddress,plcParameter);
                            break;
                        default:
                            log.warn("不支持的连接类型: {}", connectType);
                            return; // 不支持的方式
                List<String> resultWrite=null;
                if (logicItem.getApiConfigBefore()!=null){
                    ApiConfig apiConfig=logicItem.getApiConfigBefore();
                    resultWrite=api.callApi(apiConfig,plcParameters);
                    log.info("ApiConfigBefore  外置接口[{}:{}]返回的内容:{}",apiConfig.getType(),apiConfig.getAddress(),resultWrite);
                }
                //写入PLC返回值成功时调用接口
                if (basicsResult(resultWrite,logicItem.getReturnValue())){
                    ApiConfig apiConfig=logicItem.getApiConfigAfter();
                    if (logicItem.getApiConfigAfter()!=null){
                        List<String> result=api.callApi(apiConfig,plcParameters);
                        log.info("ApiConfigAfter  外置接口[{}:{}]返回的内容:{}",apiConfig.getType(),apiConfig.getAddress(),result);
                    }
                }

                }catch (Exception e){
                    log.error("调用接口失败: {}", e.getMessage(), e);
                }
                //4.返回PLC内容
                if (result != null&&!result.isEmpty()) {
                    basicsResult(result,logicItem.getReturnValue());
                }

            }
        }  catch (Exception e) {
            log.error("执行basicsLogic失败: {}", e.getMessage(), e);
@@ -344,20 +298,22 @@
            if (values!=null && !values.equals("")){
                //还需增添  不同类型调用不同方法
                switch (itemReturnValue.getPlcDataType()) {
                    case "int":
                    case "Word":
                        client.writeRegister(itemReturnValue.getAddress(),(int)Double.parseDouble(values));
                        break;
                    case "string":
                    case "String":
                        client.writeString(itemReturnValue.getAddress(),values);
                        break;
                    case "float":
                    case "Float":
                        client.writeFloat(itemReturnValue.getAddress(),Float.valueOf(values));
                        break;
                    case "bit":
                        client.writeBit(itemReturnValue.getAddress(),Boolean.valueOf(values));
                        break;
                    default:
                        log.error("不支持的数据类型: {}", itemReturnValue.getPlcDataType());
                        return false;
                }

            }
        }
        return true;

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/java/com/mes/connect/entity/ApiConfig.java

New file
@@ -0,0 +1,17 @@
package com.mes.connect.entity;


import lombok.Data;
import lombok.Getter;
import lombok.Setter;

import java.util.List;
import java.util.Map;

@Data
public class ApiConfig {
    private String codeId;
    private String type;
    private String address;
    private Map<String,Object> parameters;
}    

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/java/com/mes/connect/entity/LogicItem.java

@@ -11,9 +11,9 @@
public class LogicItem {
    private String name;
    private String sequence;
    private String connectType;
    private String method;
    private String connectAddress;
    private int logicInterval;
    private ApiConfig apiConfigBefore;
    private ApiConfig apiConfigAfter;
    private List<Logic> logic;
    private List<ReturnValue> returnValue;
    @Getter

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/java/com/mes/model/entity/Machine.java

@@ -61,14 +61,29 @@
    private int port;

    /**
     * 端口
     * 参数文件路径
     */
    private String fileUrl;
    /**
     * 参数文件
     */
    private String machineFile;

    /**
     * 端口
     * 逻辑文件
     */
    private String logicFile;

    /**
     * 开关
     */
    private String open;

    public String getMachineFile(){
        return this.fileUrl+"\\"+this.machineFile;
    }
    public String getLogicFile(){
        return this.fileUrl+"\\"+this.logicFile;
    }

}

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/Edg.json

New file
@@ -0,0 +1,52 @@
{
  "parameters": [
    {
      "serialNumber": 0,
      "content": "PLC请求",
      "codeId": "plcRequest",
      "plcDataType": "Word",
      "fontLocation": 0,
      "length": 2,
      "ratio": 1,
      "scale": 10,
      "address": "S7.DB8.DBW0",
      "remarks": ""
    },
    {
      "serialNumber": 1,
      "content": "Mes发送字",
      "codeId": "mesSend",
      "plcDataType": "Word",
      "fontLocation": 18,
      "length": 2,
      "ratio": 1,
      "scale": 10,
      "address": "S7.DB8.DBW2",
      "remarks": ""
    },
    {
      "serialNumber": 2,
      "content": "MES发送长",
      "codeId": "width",
      "plcDataType": "Word",
      "fontLocation": 20,
      "length": 2,
      "ratio": 11,
      "scale": 11,
      "address": "S7.DB8.DBW4",
      "remarks": ""
    },
    {
      "serialNumber": 11,
      "content": "MES发送宽",
      "codeId": "height",
      "plcDataType": "Word",
      "fontLocation": 22,
      "length": 2,
      "ratio": 12,
      "scale": 12,
      "address":"S7.DB8.DBW6",
      "remarks": ""
    }
  ]
}

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/EdgLogicHttp.json

New file
@@ -0,0 +1,141 @@
{
  "logics": [
    {
      "name":"请求逻辑",
      "sequence":"1",
      "apiConfigBefore": {
        "codeId": "loadSelect",
        "type": "Http",
        "address": "http://localhost:8082/account/testApi",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [1]
        },
        {
          "codeId": "mesSend",
          "value": [0]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "fixed": true,
          "value": 1
        },
        {
          "codeId": "width",
          "fixed": false,
          "value": 1
        }
      ,
        {
          "codeId": "height",
          "fixed": false,
          "value": 2
        }
      ]
    },
    {
      "name":"请求清空",
      "sequence":"2",
      "apiConfigBefore": {
        "codeId": "",
        "type": "View",
        "address": "viewname",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [0]
        },
        {
          "codeId": "mesSend",
          "value": [1]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "width",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "height",
          "fixed": true,
          "value": 0
        }
      ]
    },
    {
      "name":"完成逻辑",
      "sequence":"3",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "View",
        "address": "viewname",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcComplete",
          "value": [1]
        },
        {
          "codeId": "mesComplete",
          "value": [0]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesComplete",
          "fixed": true,
          "value": 1
        }
      ]
    },
    {
      "name":"完成清空",
      "sequence":"4",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "View",
        "address": "viewname",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcComplete",
          "value": [0]
        },
        {
          "codeId": "mesComplete",
          "value": [1,2,3]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesComplete",
          "fixed": true,
          "value": 0
        }
      ]
    }
  ]
}

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/EdgLogicProcedure.json

New file
@@ -0,0 +1,92 @@
{
  "logics": [
    {
      "name":"请求逻辑",
      "sequence":"1",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "Procedure",
        "address": "testProcedure",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [1]
        },
        {
          "codeId": "mesSend",
          "value": [0]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "address": "S7.DB8.DBW2",
          "fixed": true,
          "value": 1,
          "plcDataType": "int",
          "length": 2
        },
        {
          "codeId": "width",
          "address": "S7.DB8.DBW4",
          "fixed": false,
          "value": 1,
          "plcDataType": "int",
          "length": 2
        }
      ,
        {
          "codeId": "height",
          "address": "S7.DB8.DBW6",
          "fixed": false,
          "value": 2,
          "plcDataType": "int",
          "length": 2
        }
      ]
    },
    {
      "name":"请求清空",
      "sequence":"2",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "View",
        "address": "viewname",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [0]
        },
        {
          "codeId": "mesSend",
          "value": [1]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "width",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "height",
          "fixed": true,
          "value": 0
        }
      ]
    }
  ]
}

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/EdgLogicView.json

New file
@@ -0,0 +1,89 @@
{
  "logics": [
    {
      "name":"请求逻辑",
      "sequence":"1",
      "apiConfigBefore": {
        "codeId": "edgSelect",
        "type": "View",
        "address": "viewname"
      },
      "apiConfigAfter": {
        "codeId": "edgSelect",
        "type": "Http",
        "address": "http://localhost:8082/account/testApi",
        "parameters": {
          "method": "POST"
        }
      },
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [1]
        },
        {
          "codeId": "mesSend",
          "value": [0]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "address": "S7.DB8.DBW2",
          "fixed": true,
          "value": 1,
          "plcDataType": "int",
          "length": 2
        },
        {
          "codeId": "width",
          "address": "S7.DB8.DBW4",
          "fixed": false,
          "value": 1,
          "plcDataType": "int",
          "length": 2
        }
      ,
        {
          "codeId": "height",
          "address": "S7.DB8.DBW6",
          "fixed": false,
          "value": 2,
          "plcDataType": "int",
          "length": 2
        }
      ]
    },
    {
      "name":"请求清空",
      "sequence":"2",
      "logic":[
        {
          "codeId": "plcRequest",
          "value": [0]
        },
        {
          "codeId": "mesSend",
          "value": [1]
        }
      ],
      "returnValue": [
        {
          "codeId": "mesSend",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "width",
          "fixed": true,
          "value": 0
        },
        {
          "codeId": "height",
          "fixed": true,
          "value": 0
        }
      ]
    }
  ]
}

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/ShelfModbusTcp.json

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/ShelfS7.json

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/loadLogic.json

File was deleted

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/loadLogic2.json

File was deleted

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/loadLogicS7.json

File was deleted

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/logicalRelationship.json

File was deleted

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/JsonFile/shelfLogic.json

File was deleted

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/application-prod.yml

@@ -9,11 +9,11 @@
          username: root
          password: beibo.123/
          driver-class-name: com.mysql.cj.jdbc.Driver
        salve_JomooKBB:
          url: jdbc:sqlserver://localhost:1433;databasename=JomooKBB
          username: sa
          password: beibo.123/
          driver-class-name: com.microsoft.sqlserver.jdbc.SQLServerDriver
#        salve_JomooKBB:
#          url: jdbc:sqlserver://localhost:1433;databasename=JomooKBB
#          username: sa
#          password: beibo.123/
#          driver-class-name: com.microsoft.sqlserver.jdbc.SQLServerDriver
#        salve_JomooKBB:
#          url: jdbc:sqlserver://172.18.19.85:1433;databasename=JomooKBB
#          username: thok
@@ -22,9 +22,9 @@
  cloud:
    nacos:
      discovery:
        server-addr: localhost:8848
        server-addr: localhost:8849
  application:
    name: deviceInteraction
    name: plcConnect
  redis:
    database: 0
    host: localhost

 ShangHaiMesParent/moduleService/plcConnectModule/src/main/resources/application.yml

@@ -1,5 +1,5 @@
server:
  port: 8081
  port: 8001
  tomcat:
    uri-encoding: UTF-8
    max-threads: 800 #最大工作线程数量
@@ -15,19 +15,4 @@
  mapper-locations: classpath*:mapper/*.xml
#  configuration:
#    log-impl: org.apache.ibatis.logging.stdout.StdOutImpl
mes:
  threshold: 3
  ratio: 10
  max: # 第二条线的最大尺寸信息
    firstLength: 3500
    secondLength: 2500
  min:
    one: #第一条磨边线的最小尺寸信息
      firstLength: 600
      secondLength: 350
    two: #第二条磨边线的最小尺寸信息
      firstLength: 400
      secondLength: 300
  sequence:
    order: false


 ShangHaiMesParent/moduleService/plcConnectModule/src/test/java/com/mes/plcConnectModuleApplicationTest.java

@@ -43,16 +43,7 @@
        String s="白玻";
        log.info(s);
    }
    @Test
    public void testReadJson() {
        try {
            LogicConfig logicConfig=JsonConversion.jsonToObjectByJackson(ReadFile.readJson("shelfLogic.json").toString(), LogicConfig.class);
            PlcParameters plcParameters=JsonConversion.jsonToObjectByJackson(ReadFile.readJson("shelf.json").toString(), PlcParameters.class);
            log.info("{},{}",logicConfig,plcParameters);
        }catch (Exception e) {

        }
    }
    @Test
    public void testReadS7Old() throws IOException {
        S7PLC s7PLC = new S7PLC(EPlcType.S1500, "10.153.19.191", 102, 0, 0);
@@ -135,13 +126,17 @@
//        log.info("{}",resultView);

        // 示例 调用testProcedure存储过程
//        Map<String, Object> params = new HashMap<>();
//        params.put("dataParmars", "测试数据"); // 输入参数，对应存储过程中的IN参数
//        Map<String, Object> outParams = new HashMap<>();
//        outParams.put("messagedate", Types.VARCHAR); // 输出参数，对应存储过程中的OUT参数
//        String[] resultProcedure = api.procedureAPI("testProcedure", params, outParams);
//        // 打印执行结果
//        log.info("{}存储过程执行结果:{}",params,resultProcedure);
        Map<String, Object> params = new HashMap<>();// 参数
        Map<String, Object> inParams = new HashMap<>();// 输入参数
        Map<String, Object> outParams = new HashMap<>();// 输出参数
        inParams.put("dataParsers", "测试数据");
        outParams.put("messageDate", Types.VARCHAR);
        outParams.put("messageDate2", Types.VARCHAR);
        params.put("inParams", inParams);
        params.put("outParams", outParams);
        List<String> resultProcedure = api.procedureAPI("testProcedure", params);
        // 打印执行结果
        log.info("{}存储过程执行结果:{}",params,resultProcedure);
    }
    @Test
    public void testMainThread() {