修改josn文件位置（路径问题导致打包后找不到josn文件）

ZengTao

2024-04-10 3465af48ba22f25a2d1bda53b0fbc2707e643f6e

修改josn文件位置（路径问题导致打包后找不到josn文件）

 Albania_Mes-ui/src/configuration/Sign.json

@@ -6,7 +6,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I10.0"
      "unit":"I10.0",
      "name1":"LOW-E膜检测"
    },
    {
      "name": "A01Sr.dec",
@@ -14,7 +15,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I10.1"
      "unit":"I10.1",
      "name1":"A01减速"
    },
    {
      "name": "A01Sr.Pos",
@@ -22,7 +24,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I10.2"
      "unit":"I10.2",
      "name1":"A01到位"
      
    },
    {
@@ -31,7 +34,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I10.3"
      "unit":"I10.3",
      "name1":"A02-Y轴原点"
    },
    {
      "name": "A02Sr.YH1",
@@ -39,7 +43,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I10.4"
      "unit":"I10.4",
      "name1":"A02-Y轴高度感应1"
    },
    {
      "name": "A02Sr.YH2",
@@ -47,7 +52,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I10.5"
      "unit":"I10.5",
      "name1":"A02-Y轴高度感应2"
    },
    {
      "name": "A02Sr.YH3",
@@ -55,7 +61,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I10.6"
      "unit":"I10.6",
      "name1":"A02-Y轴高度感应3"
    },
    {
      "name": "A02Sr.YH4",
@@ -63,7 +70,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I10.7"
      "unit":"I10.7",
      "name1":"A02-Y轴高度感应4"
    },
    {
      "name": "A02Sr.LimitTop",
@@ -71,7 +79,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I11.0"
      "unit":"I11.0",
      "name1":"A02-Y轴上极限"

    },
    {
@@ -80,7 +89,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I11.1"
      "unit":"I11.1",
      "name1":"A02-Y轴下极限"
    },
    {
      "name": "A02Sr.Check",
@@ -88,7 +98,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I11.2"
      "unit":"I11.2",
      "name1":"A02-Y轴寻边"
    },
    {
      "name": "A02Sr.YDec",
@@ -96,7 +107,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I11.3"
      "unit":"I11.3",
      "name1":"A02-Y轴减速"
    },
    {
      "name": "A02Sr.Xin",
@@ -104,7 +116,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I11.4"
      "unit":"I11.4",
      "name1":"A02-X轴上片"
    },
    {
      "name": "A02Sr.XCheck",
@@ -112,7 +125,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I11.5"
      "unit":"I11.5",
      "name1":"A02-X轴寻边"
    },
    {
      "name": "A02Sr.XDec",
@@ -120,7 +134,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I11.6"
      "unit":"I11.6",
      "name1":"A02-X轴减速"
    },
    {
      "name": "A02Sr.XPos",
@@ -128,7 +143,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I11.7"
      "unit":"I11.7",
      "name1":"A02-X轴到位"
    },
    {
      "name": "C01Sr.Zero",
@@ -136,7 +152,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I124.0"
      "unit":"I124.0",
      "name1":"C01原点"
   
    },
    {
@@ -145,7 +162,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I124.1"
      "unit":"I124.1",
      "name1":"C01.YV1原点位1"
    },
    {
      "name": "C01YV1.Work1",
@@ -153,7 +171,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I124.2"
      "unit":"I124.2",
      "name1":"C01.YV1动作位1"
    },
    {
      "name": "C01.YV1.Bas2",
@@ -161,7 +180,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I124.3"
      "unit":"I124.3",
      "name1":"C01.YV1原点位2"
    },
    {
      "name": "C01.YV1.Work2",
@@ -169,7 +189,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I124.4"
      "unit":"I124.4",
      "name1":"C01.YV1动作位2"
    },
    {
      "name": "C01.YV2.Bas1",
@@ -177,7 +198,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I124.5"
      "unit":"I124.5",
      "name1":"C01.YV2原点位1"
    },
    {
      "name": "C01.YV2.Bas2",
@@ -185,7 +207,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I124.6"
      "unit":"I124.6",
      "name1":"C01.YV2原点位2"
    },
    {
      "name": "C01.YV2.Bas3",
@@ -193,7 +216,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I124.7"
      "unit":"I124.7",
      "name1":"C01.YV2原点位3"
    },
    {
      "name": "C01.YV2.Bas4",
@@ -201,7 +225,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I125.0"
      "unit":"I125.0",
      "name1":"C01.YV2原点位4"
    },
    {
      "name": "C01.YV2.Work1",
@@ -209,7 +234,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I125.1"
      "unit":"I125.1",
      "name1":"C01.YV2动作位1"
    },
    {
      "name": "C01.YV2.Work2",
@@ -217,7 +243,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I125.2"
      "unit":"I125.2",
      "name1":"C01.YV2动作位2"
    },
    {
      "name": "C01.YV2.Work3",
@@ -225,7 +252,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I125.3"
      "unit":"I125.3",
      "name1":"C01.YV2动作位3"
    },
    {
      "name": "C01.YV2.Work4",
@@ -233,7 +261,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I125.4"
      "unit":"I125.4",
      "name1":"C01.YV2动作位4"
    },
    {
      "name": "C01.YV.Blow1",
@@ -241,7 +270,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I125.5"
      "unit":"I125.5",
      "name1":"C01吹气1"
    },
    {
      "name": "C01.YV.Blow2",
@@ -249,7 +279,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I125.6"
      "unit":"I125.6",
      "name1":"C01吹气2"
    },
    {
      "name": "C01.YV.Blow3",
@@ -257,7 +288,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I125.7"
      "unit":"I125.7",
      "name1":"C01吹气3"
    },
    {
      "name": "C01.YV.Blow4",
@@ -265,7 +297,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I126.0"
      "unit":"I126.0",
      "name1":"C01吹气4"
    },
    {
      "name": "C01.SR.Limit1",
@@ -273,7 +306,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I126.1"
      "unit":"I126.1",
      "name1":"C01对射保护"
    },
    {
      "name": "C02.Sr.Zero",
@@ -281,7 +315,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I126.2"
      "unit":"I126.2",
      "name1":"C02原点"
    },
    {
      "name": "C02.YV1.Bas1",
@@ -289,7 +324,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I126.3"
      "unit":"I126.3",
      "name1":"C02.YV1原点位1"
    },
    {
      "name": "C02.YV1.Work1",
@@ -297,7 +333,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I126.4"
      "unit":"I126.4",
      "name1":"C02.YV1动作位1"
    },
    {
      "name": "C02.YV1.Bas2",
@@ -305,7 +342,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I126.5"
      "unit":"I126.5",
      "name1":"C02.YV1原点位2"
    },
    {
      "name": "C02.YV1.Work2",
@@ -313,7 +351,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I126.6"
      "unit":"I126.6",
      "name1":"C02.YV1动作位2"
    },
    {
      "name": "C02.Sr.limit1",
@@ -321,7 +360,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I126.7"
      "unit":"I126.7",
      "name1":"C02对射保护"
    },
    {
      "name": "C02.YV2.Bas1",
@@ -329,7 +369,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I127.0"
      "unit":"I127.0",
      "name1":"C02.YV2原点位1"
    },
    {
      "name": "C02.YV2.Bas2",
@@ -337,7 +378,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I127.1"
      "unit":"I127.1",
      "name1":"C02.YV2原点位2"
    },
    {
      "name": "C02.YV2.Bas3",
@@ -345,7 +387,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I127.2"
      "unit":"I127.2",
      "name1":"C02.YV2原点位3"
    },
    {
      "name": "C02.YV2.Bas4",
@@ -353,7 +396,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I127.3"
      "unit":"I127.3",
      "name1":"C02.YV2原点位4"
    },
    {
      "name": "C02.YV2.Work1",
@@ -361,7 +405,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I127.4"
      "unit":"I127.4",
      "name1":"C02.YV2动作位1"
    },
    {
      "name": "C02.YV2.Work2",
@@ -369,7 +414,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I127.5"
      "unit":"I127.5",
      "name1":"C02.YV2动作位2"
    },
    {
      "name": "C02.YV2.Work3",
@@ -377,7 +423,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I127.6"
      "unit":"I127.6",
      "name1":"C02.YV2动作位3"
    },
    {
      "name": "C02.YV2.Work4",
@@ -385,7 +432,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I127.7"
      "unit":"I127.7",
      "name1":"C02.YV2动作位4"
    },
    {
      "name": "C02.YV.Blow1",
@@ -393,7 +441,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I128.0"
      "unit":"I128.0",
      "name1":"C02吹气1"
    },
    {
      "name": "C02.YV.Blow2",
@@ -401,7 +450,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I128.1"
      "unit":"I128.1",
      "name1":"C02吹气2"
    },
    {
      "name": "C02.YV.Blow3",
@@ -409,7 +459,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I128.2"
      "unit":"I128.2",
      "name1":"C02吹气3"
    },
    {
      "name": "C02.YV.Blow4",
@@ -417,7 +468,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I128.3"
      "unit":"I128.3",
      "name1":"C02吹气4"
    },
    {
      "name": "bStart",
@@ -425,7 +477,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I128.4"
      "unit":"I128.4",
      "name1":"启动"
    },
    {
      "name": "bStop",
@@ -433,7 +486,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I128.5"
      "unit":"I128.5",
      "name1":"停止"
    },
    {
      "name": "bEstop",
@@ -441,7 +495,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I128.6"
      "unit":"I128.6",
      "name1":"急停"
    },
    {
      "name": "bReset",
@@ -449,7 +504,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I128.7"
      "unit":"I128.7",
      "name1":"复位"
    },
    {
      "name": "bAuto/Manual",
@@ -457,7 +513,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I129.0"
      "unit":"I129.0",
      "name1":"模式选择"
    },
    {
      "name": "bPause",
@@ -465,7 +522,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I129.1"
      "unit":"I129.1",
      "name1":"暂停"
    },
    {
      "name": "C01.Sr.Limit2",
@@ -473,7 +531,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I129.2"
      "unit":"I129.2",
      "name1":"C01对射保护2"
    },
    {
      "name": "C02.Sr.Limit2",
@@ -481,7 +540,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I129.3"
      "unit":"I129.3",
      "name1":"C02对射保护2"
    },
    {
      "name": "A01.FootControl",
@@ -489,7 +549,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I129.4"
      "unit":"I129.4",
      "name1":"脚踏开关"
    },
    {
      "name": "B01.Sr.DecLeft",
@@ -497,7 +558,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I129.5"
      "unit":"I129.5",
      "name1":"B01左减速"
    },
    {
      "name": "B01.Sr.PosLeft",
@@ -505,7 +567,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I129.6"
      "unit":"I129.6",
      "name1":"B01左到位"
    },
    {
      "name": "B01.Sr.SafetyLeft",
@@ -513,7 +576,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I129.7"
      "unit":"I129.7",
      "name1":"B01左安全检测"
    }
    ,
    {
@@ -522,7 +586,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I130.0"
      "unit":"I130.0",
      "name1":"B01右减速"
    }
    ,
    {
@@ -531,7 +596,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I130.1"
      "unit":"I130.1",
      "name1":"B01右到位"
    }
    ,
    {
@@ -540,7 +606,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I130.2"
      "unit":"I130.2",
      "name1":"B01右安全检测"
    }
    ,
    {
@@ -549,7 +616,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I130.3"
      "unit":"I130.3",
      "name1":"B01大车翻转原点"
    }
    ,
    {
@@ -558,7 +626,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I130.4"
      "unit":"I130.4",
      "name1":"B01大车翻转上极限"
    }
    ,
    {
@@ -567,7 +636,8 @@
      "state": "1",
      "type": "1",
      "page": "1",
      "unit":"I130.5"
      "unit":"I130.5",
      "name1":"B01大车翻转下极限"
    }
    
    

 Albania_Mes-ui/src/lang/locales/en-US.json

@@ -42,7 +42,7 @@
  "Clear":"Clear",


  "ip":"192.168.10.97",
  "ip":"localhost",
  "systemTitle": "Login System",
  "usernamePlaceholder": "Please enter username",
  "passwordPlaceholder": "Please enter password",

 Albania_Mes-ui/src/lang/locales/zh-CN.json

@@ -40,7 +40,7 @@
  "Thickness":"厚度",
  "Clear":"清除",

  "ip":"192.168.10.97",
  "ip":"localhost",
  "systemTitle": "登录系统",
  "usernamePlaceholder": "请输入用户名",
  "passwordPlaceholder": "请输入密码",

 Albania_Mes-ui/src/views/Electrical/Action.vue

@@ -12,7 +12,7 @@
      }}</router-link> -->
      <router-link to="/Electrical/Sign" tag="el-button" type="text" active-class="blue-button">{{ $t('Sign')
      }}</router-link>
       <router-link to="/Electrical/Servomanual" tag="el-button" type="text" active-class="blue-button">{{ $t('Parameter')
       <router-link to="/Electrical/AlbaniaServo" tag="el-button" type="text" active-class="blue-button">{{ $t('Parameter')
      }}</router-link>
    </el-breadcrumb>
    

 Albania_Mes-ui/src/views/Electrical/AutomaticParameterSetting.vue

@@ -11,7 +11,7 @@
      }}</router-link> -->
      <router-link to="/Electrical/Sign" tag="el-button" type="text" active-class="blue-button">{{ $t('Sign')
      }}</router-link>
      <router-link to="/Electrical/Servomanual" tag="el-button" type="text" active-class="blue-button">{{
      <router-link to="/Electrical/AlbaniaServo" tag="el-button" type="text" active-class="blue-button">{{
        $t('Parameter')
      }}</router-link>
    </el-breadcrumb>

 Albania_Mes-ui/src/views/Electrical/InteractionState.vue

@@ -32,7 +32,7 @@
        >{{ $t("Sign") }}</router-link
      >
      <router-link
        to="/Electrical/Servomanual"
        to="/Electrical/AlbaniaServo"
        tag="el-button"
        type="text"
        active-class="blue-button"

 Albania_Mes-ui/src/views/Electrical/Servomanual.vue

@@ -23,7 +23,7 @@
      <!-- <router-link to="/Electrical/ManualJog" tag="el-button" type="text" active-class="blue-button">{{
        $t('ManualJog')
      }}</router-link> -->
      
<!--       
       <router-link to="/Electrical/ManualonePosition" tag="el-button" type="text" active-class="blue-button">{{
        $t('ManualonePosition')
      }}</router-link>
@@ -39,7 +39,7 @@
  
      <router-link   v-if="hasPermission" to="/Electrical/AutomaticParameterSetting" tag="el-button" type="text" active-class="blue-button">{{
        $t('Speed parameter settings')
      }}</router-link>
      }}</router-link> -->

<router-link  v-if="hasPermission"
        to="/Electrical/InteractionState"

 Albania_Mes-ui/src/views/Electrical/Sign.vue

@@ -25,7 +25,7 @@
                item.unit
              }}</span> -->
        <span  style="width: 100%;" class="in_mc">{{
                item.name
                language === 'zh-CN'?item.name1:item.name
              }}</span>
      </div>

@@ -50,8 +50,7 @@
        params: [],
        xyData: [],
      },


      language :this.$i18n.locale,
      messagepack: {
        data: { taskname: "" }
      },
@@ -63,13 +62,14 @@
    }
  },
  created () {
    
    //this.showdata();
  },
  activated(){
    this.init();
    this.record.xyData = this.jsonData.sign;
    const language = this.$i18n.locale;
          
    
    if (language === 'zh-CN') {
            this.replaceChineseWithEnglish();
          } else {
@@ -138,7 +138,8 @@
          );


          const language = this.$i18n.locale;
          const language = this.$i18n.locale;language
          console.log(language);
          if (language === 'zh-CN') {
            this.replaceChineseWithEnglish();
          } else {

 Albania_Mes-ui/src/views/Electrical/alarm.vue

@@ -154,6 +154,7 @@
        this.roles = res.data.list;
        //table中的内容进行语言转换
        const language = this.$i18n.locale;
        
        if (language === 'zh-CN') {
          this.replaceChineseWithEnglish();
        } else {

 Albania_Mes-ui/src/views/home/index.vue

@@ -346,14 +346,14 @@
            </div>
            <div style="display: flex;align-items: center;overflow: hidden;">
                <div class="blocks" style="position: relative;width: 100%;">
                    <div class="blocks-img" :style="'z-index:999;left:150px;top:'+carposition+'px;'">
                    <div class="blocks-img" :style="'z-index:999;left:150px;top:' + carposition + 'px;'">

                    </div>
                    <div
                        :style="'position: absolute;z-index:99;left:271px;top:987px;width:210px;height:38px;background-color:' + ShowDeviceList(0) + ';'">
                    </div>
                    <div
                        :style="'position: absolute;z-index:1000;left:553px;top:'+(400+carposition)+'px;width:110px;height:88px;background-color:' + ShowDeviceList(0) + ';'">
                        :style="'position: absolute;z-index:1000;left:553px;top:' + (400 + carposition) + 'px;width:110px;height:88px;background-color:' + ShowDeviceList(0) + ';'">
                    </div>
                    <div
                        :style="'position: absolute;z-index:99;left:800px;top:450px;width:115px;height:30px;background-color:' + ShowDeviceList(0) + ';'">
@@ -480,20 +480,25 @@
                    <el-button type="primary" @click="ManualMatching()" :disabled="SoftEmergencyStopState"
                        style="z-index: 999;">{{ $t('Manual matching') }}</el-button>
                    <el-button type="primary" @click="ManualTake()" :disabled="SoftEmergencyStopState"
                        style="z-index: 999;">{{ $t('Manual removal') }}</el-button>
                        style="z-index: 999;">{{
                $t('Manual removal') }}</el-button>
                    <el-button type="primary" @click="AnewMeasure()" :disabled="SoftEmergencyStopState"
                        style="z-index: 999;">{{ $t('Remeasure') }}</el-button>
                        style="z-index: 999;">{{
                $t('Remeasure') }}</el-button>
                </div>
                <br>
                <!--显示-->
                <div style="width:1000px;height: 720px;border: 2px solid #d1d1d1;float: left;">
                    <!--玻璃图  #81b337-->
                    <div :style="'top:10px;bottom: 10px;left: 10px;right: 10px;margin:'+((720-(this.LastQueue.glassheight / 25 * 7))/2)+'px auto;width:'
                        + (this.LastQueue.glasswidth / 25 * 7) + 'px;height:'
                        + (this.LastQueue.glassheight / 25 * 7) + 'px;line-height: '
                        + (this.LastQueue.glassheight / 25 * 7) + 'px; background-color: '
                        + (this.LastQueue.state>0?'#4CCCE4':(this.LastQueue.state==0?'#E4CA4C':'#E4CA4C'))+';text-align: center;'">
                        {{ (this.LastQueue.glasswidth+this.LastQueue.glassheight)!=0?(this.LastQueue.glasswidth+"*"+this.LastQueue.glassheight):"" }} 
                    <div
                        :style="'top:10px;bottom: 10px;left: 10px;right: 10px;margin:' + ((720 - (this.LastQueue.glassheight / 25 * 7)) / 2) + 'px auto;width:'
                + (this.LastQueue.glasswidth / 25 * 7) + 'px;height:'
                + (this.LastQueue.glassheight / 25 * 7) + 'px;line-height: '
                + (this.LastQueue.glassheight / 25 * 7) + 'px; background-color: '
                + (this.LastQueue.state > 0 ? '#4CCCE4' : (this.LastQueue.state == 0 ? '#E4CA4C' : '#E4CA4C')) + ';text-align: center;'">
                        {{
                (this.LastQueue.glasswidth + this.LastQueue.glassheight) != 0 ? (this.LastQueue.glasswidth + "*" + this.LastQueue.glassheight) : ""
            }}
                    </div>

                </div>
@@ -501,17 +506,23 @@
                <div style="width:20px;height: 720px;float: left;"></div>
                <div style="width:500px;height: 620px;border: 2px solid #d1d1d1;float: left;padding: 50px 50px;">
                    <!--玻璃图  #81b337-->
                    <span class="measuretitle">{{ $t('Width') }}：</span> <span class="measureValue">{{ this.LastQueue.glasswidth }}</span> <span class="measureUnit">mm</span>
                    <span class="measuretitle">{{ $t('Width') }}：</span> <span class="measureValue">{{
                this.LastQueue.glasswidth
            }}</span> <span class="measureUnit">mm</span>
                    <br>
                    <span class="measuretitle">{{ $t('Height') }}：</span> <span class="measureValue">{{ this.LastQueue.glassheight }}</span> <span class="measureUnit">mm</span>
                    <span class="measuretitle">{{ $t('Height') }}：</span> <span class="measureValue">{{
                this.LastQueue.glassheight }}</span> <span class="measureUnit">mm</span>
                    <br>
                    <span class="measuretitle">{{ $t('Thickness') }}：</span> <span class="measureValue">{{ this.LastQueue.thickness }}</span> <span class="measureUnit">mm</span>
                   
                    <span class="measuretitle">{{ $t('Measure Width') }}：</span> <span class="measureValue">{{
                this.LastQueue.glasswidthmm }}</span> <span class="measureUnit">mm</span>
                    <br>
                    <span class="measuretitle">{{ $t('Measure Width') }}：</span> <span class="measureValue">{{ this.LastQueue.glasswidthmm }}</span> <span class="measureUnit">mm</span>
                    <br>    
                    <span class="measuretitle">{{ $t('Measure Height') }}：</span> <span class="measureValue">{{ this.LastQueue.glassheightmm }}</span> <span class="measureUnit">mm</span>
                    <span class="measuretitle">{{ $t('Measure Height') }}：</span> <span class="measureValue">{{
                this.LastQueue.glassheightmm }}</span> <span class="measureUnit">mm</span>
                    <br>
                    <span class="measuretitle">{{ $t('Matching results') }}：</span> <span class="measureValue">{{ this.LastQueue.state>0?$t('Matching successful'):(this.LastQueue.state==0?$t('Multiple data matching'):$t('Matching failed')) }}</span>
                    <span class="measuretitle">{{ $t('Matching results') }}：</span> <span class="measureValue">{{
                this.LastQueue.state > 0 ? $t('Matching successful') : 
                (this.LastQueue.state == 0 ? $t('Multiple data matching'):$t('Matching failed')) }}</span>
                    <br>
                </div>
            </div>
@@ -660,7 +671,7 @@
    name: "Home",
    data() {
        return {
            carposition:0,
            carposition: 0,
            selected: [],
            options: [{
                value: '1',
@@ -809,7 +820,7 @@
                socket.onmessage = function (msg) {
                    //console.log("收到数据====" + msg.data);
                    let obj = JSON.parse(msg.data);
                    if(obj.carposition != null){
                    if (obj.carposition != null) {
                        this.carposition = obj.carposition[0];
                    }
                    // 获取设备状态
@@ -823,11 +834,23 @@
                    this.cagelist4 = obj.cagelist4[0];
                    this.tasklist2 = obj.StoragTaskeTaskFeed[0];
                    this.tasklist1 = obj.StoragTaskeTaskOut[0];
                    this.alarm = obj.alarmmg[0];
                    if (obj.alarmmg[0].length > 0) {
                        if (this.alarm.length > 0) {
                            if (this.alarm[this.alarm.length - 1].id != obj.alarmmg[0][obj.alarmmg[0].length - 1].id) {
                                this.alarm = obj.alarmmg[0];
                                this.dialogFormVisible2 = true;
                            }
                        } else {
                            this.alarm = obj.alarmmg[0];
                            this.dialogFormVisible2 = true;
                        }
                    } else {
                        this.alarm = obj.alarmmg[0];
                        this.dialogFormVisible2 = false;
                    }

                    this.tableData1 = obj.OrderTask[0];
                    this.LastQueue = obj.LastQueue[0];


                    //是否允许出片
                    this.isAllowQueue = obj.isAllowQueue[0];
@@ -911,7 +934,7 @@
                StorageCageAddGlass(this.cell, this.StorageCageAddInfo[index]).then(res => {
                    if (res.data.message == 200) {
                        this.$message.success(this.$t('Operation successful'));
                        this.StorageCageAdd=false;
                        this.StorageCageAdd = false;
                    }
                })
            } else {
@@ -959,7 +982,7 @@
        UpdateStroageCageByCell(cell, nownum, num) {
            if (nownum == null && num == 1) {
                this.StorageCageAdd = true;
                this.Measuermode=true;
                this.Measuermode = true;
                this.cell = cell;
            } else {
                if (nownum + num == 0) {
@@ -1047,7 +1070,7 @@
        //人工匹配
        ManualMatching() {
            this.StorageCageAdd = true;
            this.Measuermode=false;
            this.Measuermode = false;
        },
        //人工拿走
        ManualTake() {
@@ -1098,7 +1121,7 @@
        },
        importData() {
            //let tbdata=JSON.stringify(this.dataList);
            let tbdata=this.dataList;
            let tbdata = this.dataList;
            console.log(tbdata);
            importData(tbdata).then(res => {
                if (res.data.message == 200) {

 PlcAlbania.json

New file
@@ -0,0 +1,414 @@
{
   "plcAddressBegin":"DB14.0",
   "plcAddressLenght":"208",
   "dataType":"word",
   "parameteInfor":[
      {
         "codeId": "PLCToMES",  
         "addressIndex":"0",
         "addressLenght":"2", 
         "ratio":"1", 
         "unit":"m/min"    
      },
      {
          "codeId": "IDStatus1",
          "addressIndex":"2",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"m/min"      
       },
       {
          "codeId": "IDStatus2",
          "addressIndex":"4",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"m/min"
       },
       {
          "codeId": "IDStatus3",
          "addressIndex":"6",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "IDStatus4",
          "addressIndex":"8",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "IDStatus5",
          "addressIndex":"10",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       }
       ,
       {
          "codeId": "IDStatus6",
          "addressIndex":"12",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "StautsID1",
          "addressIndex":"14",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       }
       ,
       {
          "codeId": "StautsID2",
          "addressIndex":"16",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       }
       ,
       {
          "codeId": "StautsID3",
          "addressIndex":"18",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       }
       ,
       {
          "codeId": "StautsID4",
          "addressIndex":"20",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       }
       ,
       {
          "codeId": "StautsID5",
          "addressIndex":"22",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "StautsID6",
          "addressIndex":"24",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "GaToMES",
          "addressIndex":"26",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "Height",
          "addressIndex":"28",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "width",
          "addressIndex":"30",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "ExportTOMES1",
          "addressIndex":"32",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       }
       ,
       {
          "codeId": "ExportToMES2",
          "addressIndex":"34",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       } ,
       {
          "codeId": "MESToPLC",
          "addressIndex":"36",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       } ,
       {
          "codeId": "MESID1",
          "addressIndex":"38",
          "addressLenght":"14",
          "ratio":"1",
          "unit":"mm/S"
       } ,
       {
          "codeId": "MESID2",
          "addressIndex":"54",
          "addressLenght":"14",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "MESID3",
          "addressIndex":"70",
          "addressLenght":"14",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "MESID4",
          "addressIndex":"86",
          "addressLenght":"14",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "MESID5",
          "addressIndex":"102",
          "addressLenght":"14",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "MESID6",
          "addressIndex":"118",
          "addressLenght":"14",
          "ratio":"1",
          "unit":"mm/S"
       },
       {
          "codeId": "MESToPLCStart1",
          "addressIndex":"134",
          "addressLenght":"2",
          "ratio":"1",
          "unit":"mm/S"
       },{
         "codeId": "MESToPLCStart2",
         "addressIndex":"136",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCStart3",
         "addressIndex":"138",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      }
      ,{
         "codeId": "MESToPLCStart4",
         "addressIndex":"140",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      }
      ,{
         "codeId": "MESToPLCStart5",
         "addressIndex":"142",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      }
      ,{
         "codeId": "MESToPLCStart6",
         "addressIndex":"144",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCTarget1",
         "addressIndex":"146",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCTarget2",
         "addressIndex":"148",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCTarget3",
         "addressIndex":"150",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCTarget4",
         "addressIndex":"152",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCTarget5",
         "addressIndex":"154",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCTarget6",
         "addressIndex":"156",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCStatus1",
         "addressIndex":"158",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCStatus2",
         "addressIndex":"160",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCStatus3",
         "addressIndex":"162",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCStatus4",
         "addressIndex":"164",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCStatus5",
         "addressIndex":"166",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToPLCStatus6",
         "addressIndex":"168",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "MESToGaStatus",
         "addressIndex":"170",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "A01Err",
         "addressIndex":"172",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "A02Err",
         "addressIndex":"174",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "B01Err",
         "addressIndex":"176",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "C01Err",
         "addressIndex":"178",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "C02Err",
         "addressIndex":"180",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "ErrSpace1",
         "addressIndex":"182",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "ErrSpace2",
         "addressIndex":"184",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "ErrSpace3",
         "addressIndex":"186",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "B01Position",
         "addressIndex":"188",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "C01Position",
         "addressIndex":"190",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "C02Position",
         "addressIndex":"192",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "DeviceState",
         "addressIndex":"194",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "AllFVRun",
         "addressIndex":"196",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "A01State",
         "addressIndex":"198",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "A02State",
         "addressIndex":"200",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "B01State",
         "addressIndex":"202",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "C01State",
         "addressIndex":"204",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      },{
         "codeId": "C02State",
         "addressIndex":"206",
         "addressLenght":"2",
         "ratio":"1",
         "unit":"mm/S"
      }
   ]
}

 springboot-vue3/src/main/java/com/example/springboot/component/InitUtil.java

@@ -7,6 +7,7 @@
import com.example.springboot.entity.device.PlcParameterObject;

import java.io.BufferedReader;
import java.io.File;
import java.io.FileReader;
import java.io.IOException;
import java.util.ArrayList;
@@ -16,6 +17,11 @@
public class InitUtil {
    //初始化word
    public static PlcParameterObject initword(String jsonFilePath) {
        // File file=new File(jsonFilePath);
        // if (!file.exists()) {
        //     System.out.println(jsonFilePath);
        //     return null;
        // }
        try {
            FileReader fileReader = new FileReader(jsonFilePath);
            BufferedReader bufferedReader = new BufferedReader(fileReader);

 springboot-vue3/src/main/java/com/example/springboot/component/PLCAutoMes.java

@@ -24,7 +24,8 @@

    // 单例实例
    private static PLCAutoMes instance;
    private static String PlcAlbania = PLCAutoMes.class.getResource("/JsonFile/PlcAlbania.json").getPath();
    private static String PlcAlbania ="D:/Code/Albania_Mes/PlcAlbania.json";
    //  PLCAutoMes.class.getResource("/JsonFile/PlcAlbania.json").getPath();
    public static PlcParameterObject PlcMesObject = initUtil.initword(PlcAlbania);
  
    // 私有构造函数

 springboot-vue3/src/main/java/com/example/springboot/component/PlcHoldNew.java

@@ -37,9 +37,9 @@
      PlcParameterObject plcmes=PLCAutoMes.PlcMesObject;
      if(plcmes.getPlcParameter("PLCToMES").getValue()!=null){
        
      //spianService.Mestast("NG0001-1",1,4,1,"MESID1",1);

       
      // spianService.Mestast("NG0001-1",40,1,0,"MESID1",1);
      // spianService.Mestast("NG0001-2",40,2,0,"MESID2",2);
      // spianService.Mestast("NG0001-3",40,2,1,"MESID3",3);
    
      String ExportTOMES1=plcmes.getPlcParameter("ExportTOMES1").getValue();//出片请求一线
      String ExportToMES2=plcmes.getPlcParameter("ExportToMES2").getValue();//出片请求二线

 springboot-vue3/src/main/java/com/example/springboot/component/Plcalarm.java

@@ -87,6 +87,7 @@

      // 根据地址读取PCL数据
      List<Boolean> plclist = S7control.getinstance().ReadBits("DB15.0.0", Plccount);
      // System.out.println(plclist);
//      List<Boolean> plclist = S7control.getinstance().ReadBits(PlcAddress, Plccount);
      // Boolean[] values = { false, false, true, false, true, false, true, false,
      // true, false, true, false, true, false,

 springboot-vue3/src/main/java/com/example/springboot/component/Plchome.java

@@ -123,9 +123,7 @@
                // if(plcmes.==null){

                // }
                

                
                // 获取测量的长，宽
                boolean istest = true;
                // String PlcRequest = "1";
@@ -135,27 +133,30 @@

                // 匹配
                // System.err.println(PlcRequest+","+MesSend+","+width+","+height);
                // String PlcRequest = plcmes.getPlcParameter("GaToMES").getValue();// 请求
                // String MesSend = plcmes.getPlcParameter("MESToGaStatus").getValue();// 发送
                // double width = Double.valueOf(plcmes.getPlcParameter("width").getValue());// 宽
                // double height = Double.valueOf(plcmes.getPlcParameter("Height").getValue());// 高
                // if ("0".equals(PlcRequest) && istest) {
                //     S7control.getinstance().WriteWord(plcmes.getPlcParameter("MESToGaStatus").getAddress(), (short) 0);
                // }
                // if ("1".equals(PlcRequest) && "0".equals(MesSend)) {
                //     boolean is = HomeService.Normal(width, height, "1");
                //     if (is && istest) {
                //         // 测量成功
                //         S7control.getinstance().WriteWord(plcmes.getPlcParameter("MESToGaStatus").getAddress(),
                //                 (short) 1);
                if (plcmes.getPlcParameter("GaToMES").getValue() != null) {
                    String PlcRequest = plcmes.getPlcParameter("GaToMES").getValue();// 请求
                    String MesSend = plcmes.getPlcParameter("MESToGaStatus").getValue();// 发送
                    double width = Double.valueOf(plcmes.getPlcParameter("width").getValue());// 宽
                    double height = Double.valueOf(plcmes.getPlcParameter("Height").getValue());// 高
                    if ("0".equals(PlcRequest) && istest) {
                        S7control.getinstance().WriteWord(plcmes.getPlcParameter("MESToGaStatus").getAddress(),
                                (short) 0);
                    }
                    if ("1".equals(PlcRequest) && "0".equals(MesSend)) {
                        boolean is = HomeService.Normal(width, height, "1");
                        if (is && istest) {
                            // 测量成功
                            S7control.getinstance().WriteWord(plcmes.getPlcParameter("MESToGaStatus").getAddress(),
                                    (short) 1);

                //     } else if (istest) {
                //         // 重新测量
                //         S7control.getinstance().WriteWord(plcmes.getPlcParameter("MESToGaStatus").getAddress(),
                //                 (short) 4);
                //     }
                        } else if (istest) {
                            // 重新测量
                            S7control.getinstance().WriteWord(plcmes.getPlcParameter("MESToGaStatus").getAddress(),
                                    (short) 4);
                        }
                    }
                }

                // }
                // S7control.getinstance().WriteWord("DB14.170", (short)0);
                Queue LastQueue = QueueMapper.selectLastQueue();
                if (LastQueue == null) {
@@ -192,27 +193,28 @@
                List<FlowCard> OrderTask = storageCageService.SelectOrderTask();
                jsonObject.append("OrderTask", OrderTask);

                // jsonObject.append("params", new short[] { 30, 40, });
                // System.out.println("jsonObject:" + jsonObject);
                ArrayList<WebSocketServer> sendwServer = WebSocketServer.sessionMap.get("Home");
                if (sendwServer != null) {
                    for (WebSocketServer webserver : sendwServer) {
                        webserver.sendMessage(jsonObject.toString());

                        if (webserver != null) {

                            List<String> messages = webserver.getMessages();

                            if (!messages.isEmpty()) {
                                // // 将最后一个消息转换为整数类型的列表
                                webserver.clearMessages();
                            }
                        }

                    }
                }

            } catch (InterruptedException e) {
                e.printStackTrace();
            }

            // jsonObject.append("params", new short[] { 30, 40, });
            ArrayList<WebSocketServer> sendwServer = WebSocketServer.sessionMap.get("Home");
            if (sendwServer != null) {
                for (WebSocketServer webserver : sendwServer) {
                    webserver.sendMessage(jsonObject.toString());

                    if (webserver != null) {

                        List<String> messages = webserver.getMessages();

                        if (!messages.isEmpty()) {
                            // // 将最后一个消息转换为整数类型的列表
                            webserver.clearMessages();
                        }
                    }

                }
            }
        }
    }

 springboot-vue3/src/main/java/com/example/springboot/component/Plcsign.java

@@ -74,8 +74,6 @@
      }
       List<String> addressList21 = Arrays.asList(config.getProperty("PlcIO.State").split(","));
       List<Boolean> plclist = S7control.getinstance().readBits(addressList21);
       List<String> addressListName = Arrays.asList(config.getProperty("PlcIO.Name").split(","));

      //  System.out.println("急停"+S7control.getinstance().ReadBits("DB10.0.5", 1));
      
      if (plclist != null) {
@@ -89,7 +87,6 @@
        }
        JSONObject jsonObject = new JSONObject();
        jsonObject.append("sig", Intlist);
        jsonObject.append("addressListName", addressListName);
//        WebSocketServer sendwServer3 = WebSocketServer.sessionMap.get("Sign");
//        if (sendwServer3 != null) {
//          sendwServer3.sendMessage(jsonObject.toString());

 springboot-vue3/src/main/java/com/example/springboot/mapper/AlbaniaMapper.java

@@ -28,7 +28,7 @@
    void Inserttask(int tasktype, int taskstate, int shelfrack, int loadrack, String glassid, int glasstype,String flowcard,int mateid,int tier);
    //新增一条笼子数据
    @Update("UPDATE `albania`.`storage_cage` SET `glass_id` =#{glassid}, `width` =width-#{glasswidth}, `glasswidth` =#{glasswidth}, `glassheight` =#{glassheight}, `glasswidthmm` =#{glasswidth}, `glassheightmm` = #{glassheight},  `state` = #{state}, `glasstype` = #{glasstype}, `number` = #{number} WHERE `id` =#{id};")
    void AddCage(int id,String glassid,Double glasswidth,Double glassheight,int state,String glasstype,int number);
    void AddCage(int id,String glassid,Double glasswidth,Double glassheight,int state,int glasstype,int number);
    //获取进片数据
    @Select("select glassid,flowcard,glasswidth as width,glassheight as height,glasswidthmm,glassheightmm,glasstype,thickness  from queue where state=1 limit 1")
    GlassInfo SelectGlass();

 springboot-vue3/src/main/java/com/example/springboot/service/JdbcConnections.java

@@ -18,7 +18,7 @@
     * 数据库连接参数
     * driver,url,username,password
     */
    private static final String DRIVER = "com.mysql.jdbc.Driver";
    private static final String DRIVER = "com.mysql.cj.jdbc.Driver";
    private static final String URL = "jdbc:mysql://10.153.19.150:3306/canadames";
    private static final String USERNAME = "root";
    private static final String PASSWORD = "beibo.123/";

 springboot-vue3/src/main/java/com/example/springboot/service/SpianServiceNew.java

@@ -48,7 +48,7 @@
        }
        //当返回的格子号为空时,返回400笼子已满
        if(cage!=null){
            albaniaMapper.AddCage(cage.getId(), glassid,width, height, 1, cage.getGlasstype(), 0);
            albaniaMapper.AddCage(cage.getId(), glassid,width, height, 1, glasstype, 0);
            Mestast(glassid,1001,cage.getId(),1,"MESID1",1);
            albaniaMapper.UpdateStorage(width,height,cage.getId());
            albaniaMapper.UpdateQueueState(glassid);

 springboot-vue3/src/main/resources/config.properties

@@ -226,7 +226,7 @@
#IO状态
PlcIO.State=DB10.2.1,DB10.2.2,DB10.2.5,DB10.10.6,DB10.11.1,DB10.11.2,DB10.11.3,DB10.11.4,DB10.11.5,DB10.11.6,DB10.12.1,DB10.12.3,DB10.10.0,DB10.10.2,DB10.10.3,DB10.10.5,DB10.26.6,DB10.30.4,DB10.33.0,DB10.30.5,DB10.33.1,DB10.30.0,DB10.30.1,DB10.30.2,DB10.30.3,DB10.32.4,DB10.32.5,DB10.32.6,DB10.32.7,DB10.32.0,DB10.32.1,DB10.32.2,DB10.32.3,DB10.27.7,DB10.24.6,DB10.38.4,DB10.41.0,DB10.38.5,DB10.41.1,DB10.35.7,DB10.38.0,DB10.38.1,DB10.38.2,DB10.38.3,DB10.40.4,DB10.40.5,DB10.40.6,DB10.40.7,DB10.40.0,DB10.40.1,DB10.40.2,DB10.40.3,DB10.0.0,DB10.0.1,DB10.0.5,DB10.0.2,DB10.0.7,DB10.0.3,DB10.28.0,DB10.36.0,DB10.1.0,DB10.18.2,DB10.18.4,DB10.19.7,DB10.18.3,DB10.18.5,DB10.20.0,DB10.18.6,DB10.19.5,DB10.19.6
PlcIO.Name=A01Sr.Low-E,A01Sr.dec,A01Sr.Pos,A02Sr.YZero,A02Sr.YH1,A02Sr.YH2,A02Sr.YH3,A02Sr.YH4,A02Sr.LimitTop,A02Sr.LimiBottom,A02Sr.Check,A02Sr.YDec,A02Sr.Xin,A02Sr.XCheck,A02Sr.XDec,A02Sr.XPos,C01Sr.Zero,C01YV1.Bas1,C01YV1.Work1,C01.YV1.Bas2,C01.YV1.Work2,C01.YV2.Bas1,C01.YV2.Bas2,C01.YV2.Bas3,C01.YV2.Bas4,C01.YV2.Work1,C01.YV2.Work2,C01.YV2.Work3,C01.YV2.Work4,C01.YV.Blow1,C01.YV.Blow2,C01.YV.Blow3,C01.YV.Blow4,C01.SR.Limit1,C02.Sr.Zero,C02.YV1.Bas1,C02.YV1.Work1,C02.YV1.Bas2,C02.YV1.Work2,C02.Sr.limit1,C02.YV2.Bas1,C02.YV2.Bas2,C02.YV2.Bas3,C02.YV2.Bas4,C02.YV2.Work1,C02.YV2.Work2,C02.YV2.Work3,C02.YV2.Work4,C02.YV.Blow1,C02.YV.Blow2,C02.YV.Blow3,C02.YV.Blow4,bStart,bStop,bEstop,bReset,bAuto/Manual,bPause,C01.Sr.Limit2,C02.Sr.Limit2,A01.FootControl,B01.Sr.DecLeft,B01.Sr.PosLeft,B01.Sr.SafetyLeft,B01.Sr.DecRight,B01.Sr.PosRight,B01.Sr.SafetyRight,B01.Sr.TurnZero,B01.Sr.TurnLimitTop,B01.Sr.TurnLimitBottom

PlcIo.Name1=LOW-E膜检测,A01减速,A01到位,A02-Y轴原点,A02-Y轴高度感应1,A02-Y轴高度感应2,A02-Y轴高度感应3,A02-Y轴高度感应4,A02-Y轴上极限,A02-Y轴下极限,A02-Y轴寻边,A02-Y轴减速,A02-X轴上片,A02-X轴寻边,A02-X轴减速,A02-X轴到位,C01原点,C01.YV1原点位1,C01.YV1动作位1,C01.YV1原点位2,C01.YV1动作位2,C01.YV2原点位1,C01.YV2原点位2,C01.YV2原点位3,C01.YV2原点位4,C01.YV2动作位1,C01.YV2动作位2,C01.YV2动作位3,C01.YV2动作位4,C01吹气1,C01吹气2,C01吹气3,C01吹气4,C01对射保护,C02原点,C02.YV1原点位1,C02.YV1动作位1,C02.YV1原点位2,C02.YV1动作位2,C02对射保护,C02.YV2原点位1,C02.YV2原点位2,C02.YV2原点位3,C02.YV2原点位4,C02.YV2动作位1,C02.YV2动作位2,C02.YV2动作位3,C02.YV2动作位4,C02吹气1,C02吹气2,C02吹气3,C02吹气4,启动,停止,急停,复位,模式选择,暂停,C01对射保护2,C02对射保护2,脚踏开关,B01左减速,B01左到位,B01左安全检测,B01右减速,B01右到位,B01右安全检测,B01
#A01参数
PlcA01.param=DB10.1664,DB10.1668,DB10.1672,DB10.1676,DB10.1680
#A01按钮