Merge branch 'master' of http://bore.pub:10439/r/ERP_override

guoyuji

2024-07-16 098dadcc34468f9fe37ffca45a55821d8d57fae8

Merge branch 'master' of http://bore.pub:10439/r/ERP_override

 north-glass-erp/northglass-erp/src/components/pp/PrintProcess.vue

@@ -23,26 +23,31 @@
})

let props = defineProps({
  printList:null,
  printMerge:null
  printList: null,
  printMerge: null,
  printLike: null
})

const {currentRoute} = useRouter()
const route = currentRoute.value
const printMerge = props.printMerge
let merge=props.printMerge
let merge = props.printMerge
if (merge == '') {
  merge = null
}
let like = props.printLike
if (like == '') {
  like = null
}
data.value.printList = JSON.parse(props.printList)
let flowCardCount = data.value.printList.length
onMounted(() => {
      request.post(`/processCard/getSelectPrinting/${merge}`, data.value).then((res) => {
      request.post(`/processCard/getSelectPrinting/${merge}/${like}`, data.value).then((res) => {
        if (res.code == 200) {
          produceList.value = deepClone(res.data.data)
          //处理单片厚度

          for (let j = 0; j <  produceList.value.length; j++) {
          for (let j = 0; j < produceList.value.length; j++) {
            let sumWeight = 0
            produceList.value[j].detailList.forEach((item, index) => {
              // 解析 separation 字段的 JSON 字符串
@@ -54,12 +59,12 @@
              // 去除 'mm' 单位
              let thicknessWithoutUnit = thicknessValue.replace('mm', '');

              item.separation=thicknessWithoutUnit
              item.separation = thicknessWithoutUnit

              sumWeight += item.width*item.height*item.quantity/1000000*item.separation*2.5*1;
              sumWeight += item.width * item.height * item.quantity / 1000000 * item.separation * 2.5 * 1;

            });
            produceList.value[j].detail[0].weight=sumWeight
            produceList.value[j].detail[0].weight = sumWeight
          }
          //处理合并打印
          if (printMerge !== null && printMerge !== undefined && printMerge !== "") {
@@ -69,26 +74,29 @@
            });

            //合并打印工艺流程处理
            let process = produceList.value[0].detail[0].process
            let indexOfJiaJiao = process.indexOf('夹胶');
            if (indexOfJiaJiao !== -1) {
              // 使用 substring 截取 "夹胶" 后面的部分，包括 "夹胶" 本身
              let afterJiaJiao = process.substring(indexOfJiaJiao).trim();
              produceList.value.forEach(item =>{
                item.detail[0].process = afterJiaJiao
              })
            if (like == null) {
              let process = produceList.value[0].detail[0].process
              let indexOfJiaJiao = process.indexOf('夹胶');
              if (indexOfJiaJiao !== -1) {
                // 使用 substring 截取 "夹胶" 后面的部分，包括 "夹胶" 本身
                let afterJiaJiao = process.substring(indexOfJiaJiao).trim();
                produceList.value.forEach(item => {
                  item.detail[0].process = afterJiaJiao
                })
              }

              let indexOfProceList = produceList.value[0].processList
              let getProceList = indexOfProceList.findIndex(item => item.process === '夹胶');

              if (getProceList !== -1) {
                // 使用 filter 方法过滤出 "夹胶" 及其之后的对象
                produceList.value[0].processList = indexOfProceList.filter((item, index) => index >= getProceList);
              }
            }
            }

            let indexOfProceList=produceList.value[0].processList
            let getProceList = indexOfProceList.findIndex(item => item.process === '夹胶');

            if (getProceList !== -1) {
              // 使用 filter 方法过滤出 "夹胶" 及其之后的对象
              produceList.value[0].processList = indexOfProceList.filter((item, index) => index >= getProceList);
            }
           }

          produceList.value.forEach(item =>{
          produceList.value.forEach(item => {
            let technologyNumberMerge = printMerge.split('').join(',');
            item.detail[0].technologyNumberMerge = technologyNumberMerge
          })
@@ -98,8 +106,8 @@
          for (let i = 0; i < produceList.value.length; i++) {
            const s01Values = [];
            // 遍历 detailList 数组，提取 S01 值到 s01Values 数组
            if (produceList.value[i].detailList[0].other_columns!=null
                || produceList.value[i].detailList[0].other_columns!=undefined){
            if (produceList.value[i].detailList[0].other_columns != null
                || produceList.value[i].detailList[0].other_columns != undefined) {
              produceList.value[i].detailList.forEach(element => {
                const otherColumnsObject = JSON.parse(element.other_columns);
                const s01Value = otherColumnsObject.S01;
@@ -113,6 +121,8 @@
            }

          }

          //处理同配置打印


          handleGetQRCode()
@@ -158,34 +168,47 @@
    let totalWeight = 0;
    // 对每个集合中的 detailList 进行计算
    produceList.value[i].detailList.forEach(collection => {
      totalQuantity += collection.quantity*1;
      totalQuantity += collection.quantity * 1;
      //每个序号面积
      collection.total_area=parseFloat((collection.width*collection.height*collection.quantity/1000000).toFixed(2))
      totalArea += collection.total_area*1;
      totalWeight += collection.width*collection.height*collection.quantity/1000000*collection.separation*2.5*1;
      collection.total_area = parseFloat((collection.width * collection.height * collection.quantity / 1000000).toFixed(2))
      totalArea += collection.total_area * 1;
      totalWeight += collection.width * collection.height * collection.quantity / 1000000 * collection.separation * 2.5 * 1;
      //每个序号周长
      collection.perimeter= (collection.width*2+collection.height*2)*collection.quantity/1000
      collection.perimeter = (collection.width * 2 + collection.height * 2) * collection.quantity / 1000
    });
    // 输出每个集合中的总数量
    produceList.value[i].detail[0].quantity=totalQuantity
    produceList.value[i].detail[0].gross_area=totalArea
    produceList.value[i].detail[0].weight=totalWeight
    produceList.value[i].detail[0].quantity = totalQuantity
    produceList.value[i].detail[0].gross_area = totalArea
    produceList.value[i].detail[0].weight = totalWeight
  }
}


</script>

<template>
<!--  <el-button id="printButton" @click="printFlowCard();">{{ $t('basicData.print') }}</el-button>-->
  <!--  <el-button id="printButton" @click="printFlowCard();">{{ $t('basicData.print') }}</el-button>-->
  <div id="printFlowCard">
    <table v-for="(item,id) in produceList" id="contentTable" :key="id">
      <thead>
      <tr v-for="(itemFlow,index) in item.detail" :key="index">
        <td colspan="24">
        <td  v-if="like='1'"  colspan="26">
          <div style="float: left;"><input style="border: none;font-size: 28px;width: 70px;margin: 5px  "/></div>
          <div id="bj" style="float: right;font-size: 28px">{{ id + 1 }}</div>
          <div>{{ company.companyName }}</div>
          <div>生产流程卡</div>
          <div v-if="itemFlow.technologyNumberMerge!=''" style="text-align: right;font-weight: bolder">流程卡号： {{
              itemFlow.process_id
            }}/{{ itemFlow.technologyNumberMerge }} 共 {{ flowCardCount }} 架
          </div>
          <div v-else style="text-align: right;font-weight: bolder">流程卡号： {{
              itemFlow.process_id
            }}/{{ itemFlow.technologyNumber }} 共 {{ flowCardCount }} 架
          </div>
        </td>
        <td v-else colspan="24">
          <div style="float: left;"><input style="border: none;font-size: 28px;width: 70px  "/></div>
          <div id="bj" style="float: right;font-size: 28px">{{ id + 1 }}</div>
          <div>{{company.companyName}}</div>
          <div>{{ company.companyName }}</div>
          <div>生产流程卡</div>
          <div v-if="itemFlow.technologyNumberMerge!=''" style="text-align: right;font-weight: bolder">流程卡号： {{
              itemFlow.process_id
@@ -203,7 +226,8 @@
        <td class="tdNowrap">项目名称：</td>
        <td colspan="2">{{ items.project }}</td>
        <td class="tdNowrap">工艺流程：</td>
        <td colspan="17" style="width: 500px">{{ items.process }}</td>
        <td colspan="19" v-if="like='1'" style="width: 500px">{{ items.process }}</td>
        <td colspan="17" v-else style="width: 500px">{{ items.process }}</td>
      </tr>
      <tr v-for="(itemTr,index) in item.detail" :key="index">
        <td class="tdNowrap">磨边类型：</td>
@@ -211,11 +235,14 @@
        <td class="tdNowrap">单片名称：</td>
        <td colspan="2">{{ itemTr.glass_child }}</td>
        <td class="tdNowrap">产品名称：</td>
        <td colspan="17">{{ itemTr.product_name }}</td>
        <td v-if="like='1'" colspan="19">{{ itemTr.product_name }}</td>
        <td v-else colspan="17">{{ itemTr.product_name }}</td>
      </tr>
      <tr>
        <td rowspan='2'>序号</td>
        <td rowspan='2'>编号</td>
        <td v-if="like=='1'" rowspan="2">小片顺序</td>
        <td v-else style="display: none;" rowspan="2">小片顺序</td>
        <td rowspan='2'>宽*高</td>
        <td rowspan='2'>数量</td>
        <td rowspan='2'>面积</td>
@@ -225,32 +252,36 @@
        <td v-for="(itemPr,index) in item.processList" :key="index" colspan="2">{{ itemPr.process }}</td>
      </tr>
      <tr>
        
        <td>{{company.printLabel.printFlowCard.patch}}</td>
        <td>{{company.printLabel.printFlowCard.lackOf}}</td>
        <td>{{company.printLabel.printFlowCard.patch}}</td>
        <td>{{company.printLabel.printFlowCard.lackOf}}</td>
        <td>{{company.printLabel.printFlowCard.patch}}</td>
        <td>{{company.printLabel.printFlowCard.lackOf}}</td>
        <td>{{company.printLabel.printFlowCard.patch}}</td>
        <td>{{company.printLabel.printFlowCard.lackOf}}</td>
        <td>{{company.printLabel.printFlowCard.patch}}</td>
        <td>{{company.printLabel.printFlowCard.lackOf}}</td>
        <td>{{company.printLabel.printFlowCard.patch}}</td>
        <td>{{company.printLabel.printFlowCard.lackOf}}</td>
        <td>{{company.printLabel.printFlowCard.patch}}</td>
        <td>{{company.printLabel.printFlowCard.lackOf}}</td>
        <td>{{company.printLabel.printFlowCard.patch}}</td>
        <td>{{company.printLabel.printFlowCard.lackOf}}</td>

        <td>{{ company.printLabel.printFlowCard.patch }}</td>
        <td>{{ company.printLabel.printFlowCard.lackOf }}</td>
        <td>{{ company.printLabel.printFlowCard.patch }}</td>
        <td>{{ company.printLabel.printFlowCard.lackOf }}</td>
        <td>{{ company.printLabel.printFlowCard.patch }}</td>
        <td>{{ company.printLabel.printFlowCard.lackOf }}</td>
        <td>{{ company.printLabel.printFlowCard.patch }}</td>
        <td>{{ company.printLabel.printFlowCard.lackOf }}</td>
        <td>{{ company.printLabel.printFlowCard.patch }}</td>
        <td>{{ company.printLabel.printFlowCard.lackOf }}</td>
        <td>{{ company.printLabel.printFlowCard.patch }}</td>
        <td>{{ company.printLabel.printFlowCard.lackOf }}</td>
        <td>{{ company.printLabel.printFlowCard.patch }}</td>
        <td>{{ company.printLabel.printFlowCard.lackOf }}</td>
        <td>{{ company.printLabel.printFlowCard.patch }}</td>
        <td>{{ company.printLabel.printFlowCard.lackOf }}</td>
      </tr>
      </thead>
      <tbody>

      <tr v-for="(itemDatile,index) in item.detailList" :key="index">
        <td>{{ itemDatile.order_number }}</td>
        <td>{{itemDatile.s01Value}}</td>
        <td>{{ itemDatile.s01Value }}</td>
        <td v-if="like=='1'">{{ itemDatile.technology_number }}</td>
        <td v-else style="display: none"></td>
        <td>{{ itemDatile.child_width }}</td>
        <td class="item" style="width: 5%;height: 100%;"><el-input @keyup="handleSummary()" style="border: none" v-model="itemDatile.quantity"></el-input></td>
        <td class="item" style="width: 5%;height: 100%;">
          <el-input v-model="itemDatile.quantity" style="border: none" @keyup="handleSummary()"></el-input>
        </td>
        <td>{{ itemDatile.total_area }}</td>
        <td>{{ itemDatile.perimeter }}</td>
        <td>{{ itemDatile.bend_radius }}</td>
@@ -285,15 +316,17 @@
        </td>
      </tr>
      <tr v-for="(itemtextarea,index) in item.detail" :key="index">
        <td colspan="6" rowspan="6" style="width: 480px;height: 100px ">
<!--          <div style="width: 100%;height: 100%"><textarea style="height: 99%;width: 99%;font-size: 11px">{{ itemtextarea.processing_note }}</textarea>-->
<!--          </div>-->
        <td v-if="like='1'" colspan="8" rowspan="6" style="width: 480px;height: 100px ">
          <div style="width: 100%;height: 100%;"><textarea style="height: 99%;width: 99%;border: none;;font-size: 11px">{{company.printLabel.printFlowCard.processingNote(itemtextarea)}}</textarea>
          </div>
        </td>
        <td v-else colspan="6" rowspan="6" style="width: 480px;height: 100px ">
          <!--          <div style="width: 100%;height: 100%"><textarea style="height: 99%;width: 99%;font-size: 11px">{{ itemtextarea.processing_note }}</textarea>-->
          <!--          </div>-->
           <div style="width: 100%;height: 100%;"><textarea style="height: 99%;width: 99%;border: none;;font-size: 11px">{{company.printLabel.printFlowCard.processingNote(itemtextarea)}}</textarea>
           </div>
        </td>
        <td>完工签名</td>
        <td></td>

        <td colspan="2"></td>
        <td colspan="2"></td>
        <td colspan="2"></td>
@@ -305,8 +338,6 @@
      </tr>
      <tr>
        <td>生产日期</td>
        <td></td>

        <td colspan="2"></td>
        <td colspan="2"></td>
        <td colspan="2"></td>
@@ -318,8 +349,6 @@
      </tr>
      <tr>
        <td>质检签名</td>
        <td></td>

        <td colspan="2"></td>
        <td colspan="2"></td>
        <td colspan="2"></td>
@@ -357,10 +386,6 @@
  text-align: center;
}

#printButton {
  margin-top: -40px;
  width: 100px;
}

#printFlowCard {
  text-align: center;
@@ -371,7 +396,6 @@
  border-collapse: collapse;
  border: 1px solid black;
  width: 100%;

}

#contentTable thead {
@@ -405,28 +429,25 @@
  font-weight: bolder;
}

input{
  font-weight: bolder;
}


@page {
  size: auto;  /* auto is the initial value */
  margin: 2mm 0mm 0mm 1mm  /* this affects the margin in the printer settings */
  margin: 2mm 2mm 0mm 1mm  /* this affects the margin in the printer settings */

}

@media print {

  tbody {
    display: table-row-group;
  }

  table {
    page-break-before: always;
  }

  table {
    page-break-inside: auto;
  }

  thead {
    display: table-header-group;
 #contentTable thead {
   display: table-header-group;
  }

  tfoot {

 north-glass-erp/northglass-erp/src/views/pp/processCard/PrintFlowCard.vue

@@ -45,7 +45,8 @@
//打印
let  printRow = ref({
  list:null,
  printMergeVal:null
  printMergeVal:null,
  like:null
})


@@ -281,6 +282,7 @@
      {code: 'customLabel', name: t('processCard.customLabelPrinting'), status: 'primary'},
      {code: 'printLabel', name: t('processCard.labelPrinting'), status: 'primary'},
      {code: 'printLabel2', name: t('processCard.labelPrinting2'), status: 'primary'},
      {code: 'printLike', name: "同配置打印", status: 'primary'},
    ],
    // import: false,
    // export: true,
@@ -337,6 +339,7 @@
          }
          printRow.value.list = JSON.stringify(selectRecords)
          printRow.value.printMergeVal=printMerge.value
          printRow.value.like=null
        // router.push({path: '/main/processCard/printProcess', query: {printList: JSON.stringify(selectRecords),printMerge:printMergeVal}})
          dialogTableVisible.value=true
          break
@@ -440,6 +443,27 @@

          break
        }
        case 'printLike': {
          if(selectRecords===null ||selectRecords===''||selectRecords.length===0){
            ElMessage.warning(t('searchOrder.msgList.checkOrder'))
            return
          }

          let id = ""
          for (let i = 0; i < selectRecords.length; i++) {
            if (i + 1 === selectRecords.length) {
              id += selectRecords[i].id
            } else {
              id += selectRecords[i].id + "|"
            }
          }
          printRow.value.list = JSON.stringify(selectRecords)
          printRow.value.printMergeVal=printMerge.value
          printRow.value.like="1"
          // router.push({path: '/main/processCard/printProcess', query: {printList: JSON.stringify(selectRecords),printMerge:printMergeVal}})
          dialogTableVisible.value=true
          break
        }
      }
    }
  },
@@ -457,9 +481,9 @@
  gridOptions.toolbarConfig.buttons = gridOptions.toolbarConfig.buttons.filter(button => {
    // 这里根据 hidePrintLabels 的值决定是否隐藏 printLabel 和 printLabel2
    if (hidePrintLabels=='true') {
      return button.code !== 'printLabel' && button.code !== 'printLabel2';
      return button.code !== 'printLabel' && button.code !== 'printLabel2' ;
    } else {
      return true; // 不隐藏任何按钮
      return true && button.code !=='printLike'; // 显示该按钮
    }
  })
}
@@ -569,7 +593,7 @@
      <template #header="{ close, titleId, titleClass }">
        <el-button v-print="printContent" @click="printNumber"  :icon="Printer" circle />
      </template>
      <print-process id="child" :printList="printRow.list" :printMerge="printRow.printMergeVal"
      <print-process id="child" :printList="printRow.list" :printMerge="printRow.printMergeVal" :printLike="printRow.like"
                    style="width: 100%;height: 100%" />
    </el-dialog>


 north-glass-erp/src/main/java/com/example/erp/controller/pp/ProcessCardController.java

@@ -177,11 +177,12 @@
    }

    @ApiOperation("打印流程卡数据查询接口")
    @PostMapping("/getSelectPrinting/{printMerge}")
    @PostMapping("/getSelectPrinting/{printMerge}/{printLike}")
    public Result getSelectPrinting(
            @PathVariable String printMerge,
            @PathVariable String printLike,
            @RequestBody Map<String, Object> object) {
        return Result.seccess(flowCardService.getSelectPrintingSv(object,printMerge));
        return Result.seccess(flowCardService.getSelectPrintingSv(object,printMerge,printLike));
    }

    @ApiOperation("打印标签数据查询接口")

 north-glass-erp/src/main/java/com/example/erp/mapper/pp/FlowCardMapper.java

@@ -117,4 +117,6 @@
    List<Map<String, String>> selectorderOtherMoney();

    List<Map<String, String>> selectReworkPrintMp(Date selectTime1, Date selectTime2, FlowCard flowCard);

    List<Map<String, Object>> getDetailListLike(String processId, String technologyNumber);
}

 north-glass-erp/src/main/java/com/example/erp/service/pp/FlowCardService.java

@@ -243,9 +243,12 @@
            return null;
        }
    }
    public Map<String, Object> getSelectPrintingSv(Map<String, Object> object, String printMerge) {
    public Map<String, Object> getSelectPrintingSv(Map<String, Object> object, String printMerge, String printLike) {
        if (printMerge == null){
            printMerge= "";
        }
        if (printLike == null){
            printLike= "";
        }
        Map<String, Object> map = new HashMap<>();
        List<Map<String, Object>> list = new ArrayList<Map<String, Object>>();//最终结果
@@ -257,15 +260,29 @@
                //是否传入合并层数
                if (printMerge.equals("")||printMerge.equals("null") ){
                    itemmap.put("detail", flowCardMapper.getPrimaryList(flowCard.getProcessId(), String.valueOf(flowCard.getTechnologyNumber())));
                        List<Map<String, Object>> detailList = flowCardMapper.getDetailList(flowCard.getProcessId(), flowCard.getTechnologyNumber());
                        itemmap.put("detailList", detailList);
                }
                else{
                    itemmap.put("detail", flowCardMapper.getPrimaryListMerge(flowCard.getProcessId(), printMerge));
                else {

                    //流程卡明细数据
                    if (printLike.equals("")||printLike.equals("null") ){
                        itemmap.put("detail", flowCardMapper.getPrimaryListMerge(flowCard.getProcessId(), printMerge));

                        List<Map<String, Object>> detailList = flowCardMapper.getDetailList(flowCard.getProcessId(), flowCard.getTechnologyNumber());
                        itemmap.put("detailList", detailList);
                    }
                    else {
                        itemmap.put("detail", flowCardMapper.getPrimaryList(flowCard.getProcessId(), String.valueOf(flowCard.getTechnologyNumber())));

                        List<Map<String, Object>> detailList = flowCardMapper.getDetailListLike(flowCard.getProcessId(), printMerge);
                        itemmap.put("detailList", detailList);
                    }
                }
                //流程卡明细数据
                List<Map<String, Object>> detailList = flowCardMapper.getDetailList(flowCard.getProcessId(), flowCard.getTechnologyNumber());

                //工艺流程
                List<Map<String, Object>> processList = flowCardMapper.getProcessList(flowCard.getProcessId(), flowCard.getTechnologyNumber());
                itemmap.put("detailList", detailList);

                itemmap.put("processList", processList);
              //  itemmap.put("numberList", numberList);
                list.add(itemmap);
@@ -273,6 +290,8 @@
            }
        }
        map.put("data", list);
        //初始化值
        printLike=null;
        return map;
    }


 north-glass-erp/src/main/resources/mapper/pp/FolwCard.xml

@@ -544,7 +544,8 @@
               od.other_columns,
               round(ogd.child_width) as width,
               round(ogd.child_height) as height,
               pd.separation
               pd.separation,
               fc.technology_number
        from flow_card as fc
                 left join sd.order_glass_detail as ogd
                           on fc.order_id = ogd.order_id and fc.order_number = ogd.order_number and
@@ -934,4 +935,29 @@
        GROUP BY fc.process_id, ogd.technology_number
        order by fc.process_id, ogd.technology_number
    </select>

    <select id="getDetailListLike">
        select fc.order_number,
               concat(round(ogd.child_width), "*", round(ogd.child_height)) as child_width,
               od.quantity,
               round(ogd.total_area, 2)                                     as total_area,
               od.perimeter,
               od.bend_radius,
               concat(od.processing_note,od.remarks) as remarks,
               od.other_columns,
               round(ogd.child_width) as width,
               round(ogd.child_height) as height,
               pd.separation,
               fc.technology_number
        from flow_card as fc
                 left join sd.order_glass_detail as ogd
                           on fc.order_id = ogd.order_id and fc.order_number = ogd.order_number and
                              fc.technology_number = ogd.technology_number
                 left join sd.order_detail as od on od.order_id = fc.order_id and od.order_number = fc.order_number
                 left join sd.product_detail as pd on pd.prod_id=od.product_id and pd.glass_sort=ogd.technology_number
        where fc.process_id = #{processId}
          and position(fc.technology_number in #{technologyNumber})
        group by fc.process_id, fc.order_number,fc.technology_number
        order by IF(sort != NULL || sort != '', sort, fc.order_number)
    </select>
</mapper>