From 1e1c416c6aa6596feb333b75d882ffeede73d3c9 Mon Sep 17 00:00:00 2001
From: guoyujie <guoyujie@ng.com>
Date: 星期二, 08 四月 2025 17:37:34 +0800
Subject: [PATCH] Merge branch 'master' of http://10.153.19.25:10101/r/ERP_override
---
north-glass-erp/src/main/resources/mapper/mm/MaterialInventory.xml | 231 +++++++++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 196 insertions(+), 35 deletions(-)
diff --git a/north-glass-erp/src/main/resources/mapper/mm/MaterialInventory.xml b/north-glass-erp/src/main/resources/mapper/mm/MaterialInventory.xml
index 6c8c158..0a1965e 100644
--- a/north-glass-erp/src/main/resources/mapper/mm/MaterialInventory.xml
+++ b/north-glass-erp/src/main/resources/mapper/mm/MaterialInventory.xml
@@ -62,7 +62,6 @@
</where>
order by mi.id desc
- limit #{offset},#{pageSize};
</select>
<select id="getSelectMaterialInventoryDatePageTotal">
@@ -75,7 +74,6 @@
and mi.available_quantity>0
</where>
- limit #{offset},#{pageSize};
</select>
@@ -84,8 +82,8 @@
ou.id as useId,
ou.project_no as projectNo,
mi.inventory_quantity AS inventoryQuantity,
- mi.plan_quantity AS availableQuantity,
- mi.plan_quantity AS planQuantity,
+ mi.available_quantity AS availableQuantity,
+ ou.not_use_count AS planQuantity,
mi.id,
mi.inventory_organization as inventoryOrganization,
mi.material_code AS materialCode,
@@ -102,26 +100,22 @@
ms.json from pp.optimize_use ou left join mm.material_inventory mi on ou.raw_stock_code=mi.id left join mm.material_store ms on mi.material_code=ms.id
left join pp.optimize_project op on op.project_no=ou.project_no
<where>
- mi.plan_quantity>0 and op.state>=100 and
- date(ou.create_time)>=#{startDate} and date(ou.create_time) <= #{endDate}
+ ou.not_use_count>0 and mi.plan_quantity>0 and op.state>=100 and ou.state=1
</where>
order by ou.id desc
- limit #{offset},#{pageSize};
</select>
<select id="getSelectMaterialInventoryEngineeringDatePageTotal">
select
- CEILING(count(id)/#{pageSize}) as 'pageTotal',
- count(id) as 'total'
- from
- pp.optimize_use ou
+ CEILING(count(ou.id)/#{pageSize}) as 'pageTotal',
+ count(ou.id) as 'total'
+ from pp.optimize_use ou left join mm.material_inventory mi on ou.raw_stock_code=mi.id left join mm.material_store ms on mi.material_code=ms.id
+ left join pp.optimize_project op on op.project_no=ou.project_no
<where>
- ou.not_use_count>0 and ou.state=1 and
- date(ou.create_time)>=#{startDate} and date(ou.create_time) <= #{endDate}
+ mi.plan_quantity>0 and op.state>=100 and ou.state=1
</where>
- limit #{offset},#{pageSize};
</select>
@@ -176,8 +170,9 @@
ou.id as useId,
ou.project_no as projectNo,
mi.inventory_quantity AS inventoryQuantity,
- mi.plan_quantity AS availableQuantity,
- mi.plan_quantity AS planQuantity,
+ ou.not_use_count AS availableQuantity,
+ ou.not_use_count AS planQuantity,
+ ou.not_use_count AS outboundQuantity,
mi.id,
mi.inventory_organization as inventoryOrganization,
mi.material_code AS materialCode,
@@ -253,7 +248,7 @@
and mo.reviewed regexp #{materialOutbound.reviewed}
</if>
</where>
- order by mo.reviewed_state desc,mo.create_time desc
+ order by mo.create_time desc
limit #{offset},#{pageSize};
</select>
@@ -287,7 +282,6 @@
and mo.reviewed regexp #{materialOutbound.reviewed}
</if>
</where>
- limit #{offset},#{pageSize};
</select>
@@ -369,7 +363,6 @@
and rw.batch regexp #{returningWarehouse.batch}
</if>
</where>
- limit #{offset},#{pageSize};
</select>
<select id="getSelectMaterialOutbound">
@@ -428,6 +421,7 @@
<select id="getSelectMaterialOutboundEngineering" >
select
+ ou.id as useId,
ou.project_no as projectNo,
modd.inventory_id as id,
modd.inventory_organization as inventoryOrganization,
@@ -517,7 +511,6 @@
and rwd.returning_id regexp #{returningWarehouseDetail.returningId}
</if>
</where>
- limit #{offset},#{pageSize};
</select>
@@ -543,6 +536,10 @@
<delete id="deleteMaterialLog" >
delete from mm.material_log where operation_order_number=#{materialOutboundId}
+ </delete>
+
+ <delete id="deleteMaterialLogById" >
+ delete from mm.material_log where id=#{id}
</delete>
<delete id="deleteReturningWarehouseDetail" >
@@ -590,11 +587,11 @@
</select>
<select id="getMaterialInventoryCount" >
- select count(*) from mm.material_inventory where material_code=#{materialCode} and date_of_manufacture=#{dateOfManufacture}
+ select * from mm.material_inventory where material_code=#{materialCode} and date_of_manufacture=#{dateOfManufacture}
</select>
<select id="getMaterialInventoryCountNull" >
- select count(*) from mm.material_inventory where material_code=#{materialCode} and date_of_manufacture is null
+ select * from mm.material_inventory where material_code=#{materialCode} and date_of_manufacture is null
</select>
<select id="getMaterialInventoryCountId" >
@@ -688,14 +685,14 @@
</insert>
<update id="updateMaterialInventoryAvailableOptOut">
- update mm.material_inventory
- set available_quantity=available_quantity-#{quantity}
+ update pp.optimize_use
+ set not_use_count=not_use_count-#{quantity}
where id=#{useId}
</update>
<update id="updateMaterialInventoryAvailableOptInt">
- update mm.material_inventory
- set available_quantity=available_quantity+#{quantity}
+ update pp.optimize_use
+ set not_use_count=not_use_count+#{quantity}
where id=#{useId}
</update>
@@ -711,15 +708,27 @@
where id=#{inventoryId}
</update>
- <update id="updateMaterialInventoryInventoryOut">
+ <update id="updateMaterialInventoryInventoryPlanQuantityOut">
update mm.material_inventory
set inventory_quantity=inventory_quantity-#{quantity},plan_quantity=if(plan_quantity-#{quantity}>=0,plan_quantity-#{quantity},0),total_area=inventory_quantity*single_piece_area
where id=#{inventoryId}
</update>
- <update id="updateMaterialInventoryInventoryInt">
+ <update id="updateMaterialInventoryInventoryPlanQuantityInt">
update mm.material_inventory
set inventory_quantity=inventory_quantity+#{quantity},plan_quantity=plan_quantity+#{quantity},total_area=inventory_quantity*single_piece_area
+ where id=#{inventoryId}
+ </update>
+
+ <update id="updateMaterialInventoryInventoryOut">
+ update mm.material_inventory
+ set inventory_quantity=inventory_quantity-#{quantity},total_area=inventory_quantity*single_piece_area
+ where id=#{inventoryId}
+ </update>
+
+ <update id="updateMaterialInventoryInventoryInt">
+ update mm.material_inventory
+ set inventory_quantity=inventory_quantity+#{quantity},total_area=inventory_quantity*single_piece_area
where id=#{inventoryId}
</update>
@@ -732,6 +741,13 @@
<update id="updateMaterialInventoryAvailableInventoryInt">
update mm.material_inventory
set available_quantity=available_quantity+#{quantity},inventory_quantity=inventory_quantity+#{quantity},total_area=inventory_quantity*single_piece_area
+ where id=#{inventoryId}
+ </update>
+
+ <update id="updateMaterialInventoryAvailableInventoryOutMes">
+ update mm.material_inventory
+ set available_quantity=available_quantity-#{quantity},inventory_quantity=inventory_quantity-#{quantity},
+ plan_quantity=plan_quantity-#{quantity},total_area=inventory_quantity*single_piece_area
where id=#{inventoryId}
</update>
@@ -767,7 +783,21 @@
update mm.material_inventory set inventory_quantity=inventory_quantity+#{materialInventory.inventoryQuantity},
available_quantity=available_quantity+#{materialInventory.inventoryQuantity},
total_area=single_piece_area*inventory_quantity
- where material_code=#{materialCode}
+ where material_code=#{materialCode} and date_of_manufacture is null
+ </update>
+
+ <update id="updateMaterialInventoryOut" >
+ update mm.material_inventory set inventory_quantity=inventory_quantity-#{quantity},
+ available_quantity=available_quantity-#{quantity},
+ total_area=single_piece_area*inventory_quantity
+ where material_code=#{materialCode} and date_of_manufacture=#{dateOfManufacture}
+ </update>
+
+ <update id="updateMaterialInventoryNullOut" >
+ update mm.material_inventory set inventory_quantity=inventory_quantity-#{quantity},
+ available_quantity=available_quantity-#{quantity},
+ total_area=single_piece_area*inventory_quantity
+ where material_code=#{materialCode} and date_of_manufacture is null
</update>
<update id="updateMaterialInventoryReturning" >
@@ -958,13 +988,13 @@
</if>
<if test="materialLog.inventoryId != null and materialLog.inventoryId != ''">
- and ml.inventoryId regexp #{materialLog.inventoryId}
+ and ml.inventory_id regexp #{materialLog.inventoryId}
</if>
<if test="materialLog.materialCode != null and materialLog.materialCode != ''">
- and ml.materialCode regexp #{materialLog.materialCode}
+ and ml.material_code regexp #{materialLog.materialCode}
</if>
<if test="materialLog.materialName != null and materialLog.materialName != ''">
- and ml.materialName regexp #{materialLog.materialName}
+ and ml.material_name regexp #{materialLog.materialName}
</if>
<if test="materialLog.producer != null and materialLog.producer != ''">
and ml.producer regexp #{materialLog.producer}
@@ -983,6 +1013,9 @@
</if>
<if test="materialLog.remarks != null and materialLog.remarks != ''">
and ml.remarks regexp #{materialLog.remarksr}
+ </if>
+ <if test="materialLog.projectNo != null and materialLog.projectNo != ''">
+ and ml.project_no regexp #{materialLog.projectNo}
</if>
</where>
order by ml.id desc
@@ -1019,13 +1052,13 @@
</if>
<if test="materialLog.inventoryId != null and materialLog.inventoryId != ''">
- and ml.inventoryId regexp #{materialLog.inventoryId}
+ and ml.inventory_id regexp #{materialLog.inventoryId}
</if>
<if test="materialLog.materialCode != null and materialLog.materialCode != ''">
- and ml.materialCode regexp #{materialLog.materialCode}
+ and ml.material_code regexp #{materialLog.materialCode}
</if>
<if test="materialLog.materialName != null and materialLog.materialName != ''">
- and ml.materialName regexp #{materialLog.materialName}
+ and ml.material_name regexp #{materialLog.materialName}
</if>
<if test="materialLog.producer != null and materialLog.producer != ''">
and ml.producer regexp #{materialLog.producer}
@@ -1069,5 +1102,133 @@
</where>
</select>
+ <select id="getSelectMaterialOutboundProjectNo">
+ select * from mm.material_outbound mo where order_id=#{projectNo}
+ </select>
+ <select id="getSelectOptimizeUses">
+ select * from pp.optimize_use where project_no=#{projectNo} and width=#{width} and height=#{height} and state=1
+ </select>
+
+ <select id="getSelectMaterialOutboundOptimizeUses">
+ select * from mm.material_outbound_detail mo
+ <where>
+ mo.material_outbound_id=#{materialOutboundId}
+ <if test="useId != null">
+ and mo.use_id=#{useId}
+ </if>
+ </where>
+ </select>
+
+ <update id="updateMaterialOutboundOptimizeUses">
+ update mm.material_outbound_detail set outbound_quantity=outbound_quantity+#{quantity} where use_id=#{useId};
+ </update>
+
+ <update id="updateOptimizeUsesMes">
+ update pp.optimize_use set not_use_count=not_use_count-#{quantity} where id=#{useId};
+ </update>
+
+ <insert id="insertMaterialOutboundDetailOptimizeUses" useGeneratedKeys="true" >
+ insert into mm.material_outbound_detail (material_outbound_id,material_outbound_number,material_code,use_id,inventory_id,inventory_organization,
+ outbound_quantity,single_piece_area,inventory_area,date_of_manufacture)
+ values (
+ #{materialOutboundId} ,#{number},#{materialCode},#{useId},#{inventoryId},'鍘熺墖搴�',#{outboundQuantity},
+ #{singlePieceArea},#{inventoryArea},#{dateOfManufacture}
+ )
+ </insert>
+
+ <insert id="insertMaterialOutboundOptimizeUses" useGeneratedKeys="true" >
+ insert into mm.material_outbound(material_outbound_id,order_id,outbound_type,
+ warehouse_manager,material_requisition_date,reviewed_state,reviewed,create_time,reviewed_time)
+ values (
+ #{materialOutboundId} ,#{projectNo},'鏍囧噯鍑哄簱',#{name},now(),1,#{name},now(),now()
+ )
+ </insert>
+
+ <select id="selectProjectNo">
+ select project_no from pp.optimize_use where id=#{useId};
+ </select>
+
+ <select id="getOptimizeOutboundReport">
+ SELECT
+ ml.operation_order_number,
+ ml.project_no,
+ ml.inventory_id,
+ ml.material_name,
+ ml.unit,
+ ml.width,
+ ml.height,
+ ml.thickness,
+ ml.quantity,
+ round(ml.width*ml.height*ml.quantity/1000000,2) as area,
+ ou.use_count,
+ ou.not_use_count,
+ ml.operator,
+ ml.operate_time
+
+ FROM
+ mm.material_log AS ml
+ LEFT JOIN pp.optimize_use AS ou ON ou.project_no = ml.project_no
+ AND ou.raw_stock_code = ml.inventory_id
+ WHERE
+ ou.project_no IS NOT NULL
+ AND date( ml.operate_time )>= #{startDate} and date(ml.operate_time) <= #{endDate}
+ and ml.operate_type=#{type}
+
+ <if test="materialLog.operationOrderNumber != null and materialLog.operationOrderNumber != ''">
+ and ml.operation_order_number regexp #{materialLog.operationOrderNumber}
+ </if>
+ <if test="materialLog.useCount != null and materialLog.useCount != ''">
+ and ou.use_count regexp #{materialLog.useCount}
+ </if>
+ <if test="materialLog.quantity != null and materialLog.quantity != ''">
+ and ml.quantity regexp #{materialLog.quantity}
+ </if>
+ <if test="materialLog.width != null and materialLog.width != ''">
+ and ml.width regexp REGEXP_REPLACE(#{materialLog.width},'\\.0+$','')
+ </if>
+ <if test="materialLog.height != null and materialLog.height != ''">
+ and ml.height regexp REGEXP_REPLACE(#{materialLog.height},'\\.0+$','')
+ </if>
+ <if test="materialLog.thickness != null and materialLog.thickness != ''">
+ and ml.thickness regexp REGEXP_REPLACE(#{materialLog.thickness},'\\.0+$','')
+ </if>
+
+ <if test="materialLog.inventoryId != null and materialLog.inventoryId != ''">
+ and ml.inventory_id regexp #{materialLog.inventoryId}
+ </if>
+
+ <if test="materialLog.materialName != null and materialLog.materialName != ''">
+ and ml.material_name regexp #{materialLog.materialName}
+ </if>
+ <if test="materialLog.producer != null and materialLog.producer != ''">
+ and ml.producer regexp #{materialLog.producer}
+ </if>
+ <if test="materialLog.unit != null and materialLog.unit != ''">
+ and ml.unit regexp #{materialLog.unit}
+ </if>
+ <if test="materialLog.operator != null and materialLog.operator != ''">
+ and ml.operator regexp #{materialLog.operator}
+ </if>
+ <if test="materialLog.remarks != null and materialLog.remarks != ''">
+ and ml.remarks regexp #{materialLog.remarksr}
+ </if>
+ order by ml.id desc
+ limit #{offset},#{pageSize};
+ </select>
+
+ <select id="getOptimizeOutboundReportTotal">
+ SELECT
+ CEILING(count(ml.id)/#{pageSize}) as 'pageTotal',
+ count(ml.id) as 'total'
+
+ FROM
+ mm.material_log AS ml
+ LEFT JOIN pp.optimize_use AS ou ON ou.project_no = ml.project_no
+ AND ou.raw_stock_code = ml.inventory_id
+ WHERE
+ ou.project_no IS NOT NULL
+ AND date( ml.operate_time )>= #{startDate} and date(ml.operate_time) <= #{endDate}
+ and ml.operate_type=#{type}
+ </select>
</mapper>
\ No newline at end of file
--
Gitblit v1.8.0