From 35081d417369dece26c4e076e949fcfb0704c068 Mon Sep 17 00:00:00 2001
From: wangfei <3597712270@qq.com>
Date: 星期三, 16 十月 2024 08:13:02 +0800
Subject: [PATCH] Merge branch 'hangzhou_master' of http://10.153.19.25:10101/r/HangZhouMes into hangzhou_master
---
UI-Project/src/layout/MainErpView.vue | 187 +++++------
UI-Project/src/lang/en.js | 405 ++++++++++++++++++++----
UI-Project/src/lang/py.js | 300 ++++++++++++++++++
UI-Project/src/lang/index.js | 7
UI-Project/src/views/LoginView.vue | 14
5 files changed, 727 insertions(+), 186 deletions(-)
diff --git a/UI-Project/src/lang/en.js b/UI-Project/src/lang/en.js
index d80a9be..eddcad4 100644
--- a/UI-Project/src/lang/en.js
+++ b/UI-Project/src/lang/en.js
@@ -188,26 +188,47 @@
waiting:'袞写械屑.',
},
workOrder:{
- glassID:'小褌械泻谢褟薪薪褘泄 ID',
- height:'袙褘褋芯褌邪',
- width:'楔懈褉懈薪邪',
- thickness:'孝芯谢褖懈薪邪',
- coatingtypes:'孝懈锌褘 锌芯泻褉褘褌懈泄',
- productionsequence:'袩芯褋谢械写芯胁邪褌械谢褜薪芯褋褌褜 锌褉芯懈蟹胁芯写褋褌胁邪',
- cardnumber:'袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪',
- operate:'袨锌械褉邪褑懈褟',
- messagedamaged:'袩芯胁褉械卸写械薪芯 谢懈 褋芯芯斜褖械薪懈械锛�',
- prompt:'袩芯写褋泻邪蟹泻',
- yes:'袛邪',
- cancel:'袨褌屑械薪邪',
- takemessage:'小谢械写褍械褌 谢懈 褍写邪谢褟褌褜 褋芯芯斜褖械薪懈械锛�',
- breakage:'袩芯胁褉械卸写械薪懈械',
- takeout:'袙蟹褟褌褜',
+ glassID: 'Glass ID',
+ height: 'Height',
+ width: 'Width',
+ thickness: 'Thickness',
+ coatingtypes: 'Coating types',
+ productionsequence: 'Production sequence',
+ cardnumber: 'Process card number',
+ operate: 'Operate',
+ messagedamaged: 'Is this information damaged?',
+ prompt: 'Prompt',
+ yes: 'Yes',
+ cancel: 'Cancel',
+ takemessage: 'Do you need to delete the message锛�',
+ breakage: 'Breakage',
+ takeout: 'Take away',
+ glasstype: 'Glass type',
+ line: 'Wire',
+ status: 'Status',
},
- processCard:{
- intofurnace:'袙 锌械褔褜',
- beforefurnace:'袛芯 锌械褔泻懈.',
- outfurnace:'袨泻芯薪褔械薪芯 褋褌械泻谢芯 懈蟹 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈',
+ processCard: {
+ intofurnace: 'Entering the furnace',
+ beforefurnace: 'Before entering the furnace',
+ outfurnace: 'Glass finished from tempering furnace',
+ print: 'Take away the print',
+ printing: 'print',
+ projectnumber: 'Please enter the project number',
+ inquire: 'Inquire',
+ project: 'Project number',
+ awayprocess: 'Take away the process',
+ awayequipment: 'Take away the equipment',
+ awayteam: 'Take away the crew',
+ flowcard: 'Process card',
+ layer: 'Layer number',
+ temperinglayout: 'Heat number',
+ temperingfeed: 'Preface',
+ width: 'Width',
+ height: 'Height',
+ thickness: 'Thickness',
+ glasstakeout: 'Glass take away list',
+ layoutID: 'Drawing ID of loading for tempering furnace',
+ glassID: 'Glass ID',
},
reportWork:{
lowerbit:'小褌邪薪褑懈褟 褉邪蟹谐褉褍蟹泻懈',
@@ -237,66 +258,292 @@
width:'楔懈褉懈薪邪',
height:'袙褘褋芯褌邪',
},
- productStock:{
- addusers:'袛芯斜邪胁褜褌械 锌芯谢褜蟹芯胁邪褌械谢械泄.',
- username:'袠屑褟 锌芯谢褜蟹芯胁邪褌械谢褟.',
- usernamea:'袠屑褟 锌芯谢褜蟹芯胁邪褌械谢褟.锛�',
- inusername:'袙胁械写懈褌械 懈屑褟 锌芯谢褜蟹芯胁邪褌械谢褟',
- role:'袪芯谢褜',
- rolea:'袪芯谢褜锛�',
- inrole:'袙褘斜械褉懈褌械 褉芯谢褜',
- test:'孝械褋褌',
- admin:'袗写屑懈薪懈褋褌褉邪褌芯褉.',
- operate:'袨锌械褉邪褑懈褟',
- resetpassword:'小斜褉芯褋懈褌褜 锌邪褉芯谢褜',
- exit:'袪械写邪泻褌芯褉',
- delete:'校写邪谢',
- prompt:'袩芯写褋泻邪蟹泻',
- repassword:'袩械褉械蟹邪谐褉褍蟹泻邪 锌芯谢褜蟹芯胁邪褌械谢褜褋泻芯谐芯 锌邪褉芯谢褟 懈谢懈 薪械褌锛�',
- yes:'袛邪',
- cancel:'袨褌屑械薪邪',
- reusername:'袠蟹屑械薪械薪懈械 锌芯谢褜蟹芯胁邪褌械谢褟',
- addusername:'袛芯斜邪胁褜褌械 锌芯谢褜蟹芯胁邪褌械谢械泄.',
- password:'袣芯写锛�',
- sure:'锌芯写褌胁械褉写',
- inpassword:'袙胁械写懈褌械 锌邪褉芯谢褜.',
- deusername:'校写邪谢械薪懈械 锌芯谢褜蟹芯胁邪褌械谢褟 懈谢懈 薪械褌锛�',
+
+ productStock: {
+ addusers: 'Add user',
+ username: 'User name',
+ usernamea: 'User name锛�',
+ inusername: 'Enter one user name',
+ role: 'Role',
+ rolea: 'Role锛�',
+ inrole: 'Please select a role',
+ test: 'Test',
+ admin: 'Administrator',
+ operate: 'Operate',
+ resetpassword: 'Reset password',
+ exit: 'Edit',
+ delete: 'Delete',
+ prompt: 'Prompt',
+ repassword: 'Do you want to reset the user password锛�',
+ yes: 'Yes',
+ cancel: 'Cancel',
+ reusername: 'Modify Users',
+ addusername: 'Add user',
+ password: 'Password锛�',
+ sure: 'Confirm',
+ inpassword: 'Please input a password',
+ deusername: 'Do you want to delete the user锛�',
},
- customer:{
- addmenu:'袛芯斜邪胁褜褌械 屑械薪褞.',
- firstmenu:'孝邪斜谢懈褑邪 屑械薪褞 锌械褉胁芯泄 褋褌械锌械薪懈',
- link:'小褋褘谢泻',
- linka:'小褋褘谢泻锛�',
- inlink:'袙胁械写懈褌械 褋褋褘谢泻褍',
- sort:'小芯褉褌懈褉芯胁泻',
- sorta:'小芯褉褌懈褉芯胁泻锛�',
- insort:'袙胁械写懈褌械 褋芯褉褌懈褉芯胁泻褍',
- operate:'袨锌械褉邪褑懈褟',
- exit:'袪械写邪泻褌芯褉',
- inmenu:'袙胁械写懈褌械 屑械薪褞',
- delete:'校写邪谢',
- semenu:'孝邪斜谢懈褑邪 屑械薪褞 胁褌芯褉芯泄 褋褌械锌械薪懈',
- menu:'袦械薪褞.锛�',
- sure:'锌芯写褌胁械褉写',
- cancel:'袨褌屑械薪邪',
- exmene:'袠蟹屑械薪械薪懈械 屑械薪褞.',
- yes:'袛邪',
- demenu:'校写邪谢懈褌褜 屑械薪褞 懈谢懈 薪械褌锛�',
- prompt:'袩芯写褋泻邪蟹泻',
+ customer: {
+ addmenua: 'Add secondary menus',
+ addmenu: 'Add a first-level menu',
+ firstmenu: 'First level menu bar',
+ firstmenuname: 'The name of the first-level menu:',
+ link: 'Link',
+ inlink: 'Please enter the link',
+ linka: 'Link锛�',
+ sort: 'Sort',
+ insort: 'Please enter sorting',
+ sorta: 'Sort锛�',
+ operate: 'Operate',
+ exit: 'Edit',
+ delete: 'Delete',
+ semenu: 'Secondary menu bar',
+ semenuname: 'Secondary menu name:',
+ menu: 'Menu bar锛�',
+ inmenu: 'Please enter a menu name',
+ sure: 'Confirm',
+ cancel: 'Cancel',
+ exmene: 'Modify the first-level menu',
+ exmenea: 'Modify the secondary menu',
+ yes: 'Yes',
+ demenu: 'Do you want to delete this menu锛�',
+ prompt: 'Prompt',
},
- delivery:{
- addrole:'袛芯斜邪胁褜褌械 褉芯谢懈.',
- editrole:'袠蟹屑械薪械薪懈械 褉芯谢懈.',
- role :'袪芯谢褜',
- rolea :'袪芯谢褜锛�',
- inrole :'袙胁械写懈褌械 褉芯谢懈.',
- operate :'袨锌械褉邪褑懈褟',
- edit :'袪械写邪泻褌芯褉',
- delete :'校写邪谢',
- sure :'锌芯写褌胁械褉写',
- cancel :'袨褌屑械薪邪',
- yes:'袛邪',
- derole :'校写邪谢懈褌褜 锌械褉褋芯薪邪卸 懈谢懈 薪械褌锛�',
- prompt:'袩芯写褋泻邪蟹泻',
+ delivery: {
+ addrole: 'Add Role',
+ editrole: 'Modify role',
+ role: 'Role',
+ rolea: 'Role锛�',
+ inrole: 'Please enter the role',
+ operate: 'Operate',
+ edit: 'Edit',
+ delete: 'Delete',
+ yes: 'Yes',
+ sure: 'Confirm',
+ cancel: 'Cancel',
+ derole: 'Do you want to delete this role',
+ prompt: 'Prompt',
+ choice: 'Menu permissions锛�',
+ inchoice: 'Please select Menu Permissions',
},
- }
\ No newline at end of file
+ replenish: {
+ patchManagement: 'Mesh management',
+
+ },
+ rework: {
+ reworkManagement: 'Rework management',
+ addRework: "Rework added ",
+ },
+
+
+ role: {
+ id: 'ID',
+ characterHomepage: 'Character Home',
+ },
+ user: {
+ userId: 'User ID',
+ userHomepage: 'User Home',
+ },
+ orderBasicData: {
+ order: 'orders',
+ orderType: 'The type of order',
+ },
+ machine: {
+ basicId: 'Device number',
+ basicName: 'The name of the device',
+ basicCategory: 'The process in which it is located',
+ tempering: 'Steel',
+ },
+ report: {
+ productionReport: 'Production reports',
+ workInProgressReport: 'WIP report',
+ },
+ productionBasicData: {
+ basicDataQuery: 'Basic data query',
+ },
+ mainIngredient: {
+ materialInformation: 'Material information',
+ },
+ mainIngredientStock: {
+ materialName: 'The name of the item',
+ createTime: 'Return date',
+ },
+ large: {
+ time: 'The time of the break',
+ number: 'Order number',
+ jobnumber: 'Job number',
+ productionnumber: 'The production order number',
+ cardnumber: 'Process card number',
+ projectname: 'The name of the project',
+ batch: 'batch',
+ detailID: 'Detail ID',
+ building: 'Building No',
+ serialnumber: 'Order serial number',
+ productname: 'Product name',
+ serial: 'Process validation number',
+ slicemarker: 'Frame marker (position)',
+ numberpatches: 'Number of patches',
+ width: 'Width',
+ height: 'Height',
+ shape: 'Shape',
+ responsibleprocess: 'Responsible process',
+ process: 'This process',
+ numberfractions: 'The number of unfilled fractions',
+ breakreason: 'The reason for the break',
+ breaktype: 'Sub-break type',
+ responsiblepersonnel: 'Responsible Personnel',
+ responsiblequipment: 'Responsible Equipment',
+ responsibleteam: 'Responsible team',
+ area: 'Sub-broken area',
+ inspector: 'Quality inspector',
+ operate: 'Operate',
+ mes: 'Detail',
+ projectnumber: 'The project order number',
+ brokeno: 'The report is broken and not filled',
+ close: 'Shut down',
+ orderId: 'Order ID',
+ customerName: 'The name of the customer',
+ project: 'The name of the project',
+ are: 'are',
+ quantity: 'quantity',
+ warehousing: 'State',
+ deliveryDate: 'Delivery time',
+ notstocked: 'Not yet in stock',
+ inboundstatus: 'Partial inventory status',
+ allstatus: 'All in stock status',
+ completedquantity: 'Completed quantity',
+ scrapquantity: 'Scrap Quantity',
+ method: 'Processing method',
+ innumber: 'Quantity already entered',
+ productstatus: 'Production status',
+ right: 'normal',
+ stop: 'termination',
+ inquire: 'query',
+ starttime: 'Start Time',
+ endtime: 'End Time',
+ loading: 'In the process of uploading锛�',
+ },
+ reportmanage: {
+ productiontime: 'production time',
+ starttime: 'Start Time',
+ endtime: 'End Time',
+ ctype: 'Please select type',
+ cstate: 'Please select the status',
+ cprocess: 'Please select the process',
+ all: 'All',
+ completed: 'Completed',
+ broke: 'Damaged',
+ takeout: 'Takeout',
+ dreportwork: 'Unreported work',
+ pendingwork: 'Pending job application',
+ reportwork: 'Reported work',
+ incise: 'slicing',
+ edging: 'edging',
+ steel: 'toughened',
+ inquire: 'query',
+ signingwork: 'Reporting for work',
+ reporteam: 'Report work team',
+ reportingequipment: 'Reporting equipment',
+ line: 'line',
+ process: 'production processes',
+ glassID: 'Glass ID',
+ projectnumber: 'Project number',
+ layoutID: 'Tempered layout ID',
+ type: 'type',
+ state: 'state',
+ processcards: 'Flow Card',
+ number: 'Serial Number',
+ layer: 'storey',
+ typebreakage: 'Damage type',
+ ptypebreakage: ' Please select the type of damage',
+ causebreakage: 'Reason for damage',
+ pcausebreakage: 'Please select the reason for the damage',
+ responsibleprocess: 'Responsibility Process',
+ responsiblepersonnel: 'Responsible personnel',
+ presponsiblepersonnel: 'Please enter the responsible personnel',
+ responsibleteam: 'Responsible team',
+ presponsibleteam: 'Please select the responsible team',
+ responsibleequipment: 'Responsible equipment',
+ presponsibleequipment: 'Please select the responsible device',
+ remark: 'notes',
+ premark: 'Please enter a note',
+ },
+ film: {
+ mes: 'Original film storage details',
+ warehousing: 'store',
+ operate: 'Operate',
+ exit: 'Edit',
+ delete: 'Delete',
+ outbound: 'Outbound',
+ deviceid: 'device ID',
+ slot: 'Grid number',
+ enablestatea: 'Enable tagging',
+ disable: 'Disable',
+ start: 'Enable',
+ startslot: 'Start workstation',
+ endslot: 'Target workstation',
+ slotid: 'Grid ID',
+ width: 'Width',
+ widtha: 'Width锛�',
+ inwidth: 'Please enter width',
+ height: 'Height',
+ inheight: 'Please enter height',
+ heighta: 'Height锛�',
+ thickness: 'Thickness',
+ inthickness: 'Please enter thickness',
+ thicknessa: 'Thickness锛�',
+ films: 'Films',
+ infilms: 'Please enter films',
+ filmsa: 'Films锛�',
+ createtime: 'Creation time',
+ remainquantity: 'Remaining Quantity',
+ thickremainquantity: 'Remaining quantity of original film (sheets)锛�',
+ inquantity: 'Please enter the quantity',
+ quantitya: 'Number锛�',
+ enableid: 'Task ID',
+ originateslot: 'Starting grid',
+ patternquantity: 'Number',
+ enabletype: 'Task Type',
+ enablestate: 'Workstation status',
+ finish: 'Completed',
+ unfinish: 'Incomplete',
+ dedelete: 'Do you want to delete this content锛�',
+ dedisable: 'Do you want to disable this content锛�',
+ deoutbound: 'Whether to release the content of this item from the warehouse锛�',
+ selectwarehousing: 'Please select the lifting position',
+ inwarehousing: 'Lifting position锛�',
+ warehousing1: 'Lifting position 1',
+ warehousing2: 'Lifting position 2',
+ starttime: 'Start Time',
+ endtime: 'End Time',
+ taskstatus: 'Status',
+ built: 'newly built',
+ execution: 'In progress',
+ tasktype: 'Task Type',
+ stocke: 'store',
+ dispatch: 'dispatch',
+ inquire: 'query',
+ station: 'station',
+ },
+ Mounting: {
+ previewproject: 'Select Preview Project',
+ loadinglinea: 'Upper film line',
+ loadingline: 'Upper film line锛�',
+ inloadingline: 'Please select the upper film line',
+ oneloadingline: 'Line 1 on film',
+ twoloadingline: 'Line 2 on film',
+ waiting: 'Waiting',
+ setparameters: 'Set parameters',
+ project: 'Project number',
+ projecta: 'Project number锛�',
+ width: 'Width',
+ height: 'Height',
+ thickness: 'Thickness',
+ projectnumber: 'Project original piece number',
+ state: 'state',
+ createtime: 'Creation time',
+ all: 'Select All',
+
+ }
+}
\ No newline at end of file
diff --git a/UI-Project/src/lang/index.js b/UI-Project/src/lang/index.js
index 2a371f6..e226ac6 100644
--- a/UI-Project/src/lang/index.js
+++ b/UI-Project/src/lang/index.js
@@ -1,10 +1,11 @@
-
-import { createI18n} from 'vue-i18n'
+import {createI18n} from 'vue-i18n'
import zh from "./zh"
+import py from "./py"
import en from "./en"
let messages = {
- zh:zh,
+ zh: zh,
+ py: py,
en: en
}
diff --git a/UI-Project/src/lang/py.js b/UI-Project/src/lang/py.js
new file mode 100644
index 0000000..5bdf392
--- /dev/null
+++ b/UI-Project/src/lang/py.js
@@ -0,0 +1,300 @@
+export default {
+ "northglassMESsystem": '小懈褋褌械屑邪 "NorthGlass MES"',
+ login: {
+ userErr: '袙胁械写懈褌械 薪芯屑械褉 褋褔械褌邪.',
+ pwErr: '袙胁械写懈褌械 锌邪褉芯谢褜.',
+ user: '袗泻泻邪褍薪褌',
+ password: '袣芯写',
+ login: '袟邪谢芯谐懈薪',
+ loginSuccessful: '袙褏芯写 胁 褋懈褋褌械屑褍 胁褘锌芯谢薪械薪 褍褋锌械褕薪芯锛�',
+ register: '袟邪褉械谐懈褋褌褉懈褉芯胁邪',
+ namea: '袠屑褟 薪械 屑芯卸械褌 斜褘褌褜 锌褍褋褌褘屑',
+ len: '袛谢懈薪邪 薪械 写芯谢卸薪邪 锌褉械胁褘褕邪褌褜 16',
+ passnull: '袩邪褉芯谢褜 薪械 屑芯卸械褌 斜褘褌褜 锌褍褋褌褘屑',
+ leng: '袛谢懈薪邪 锌邪褉芯谢褟 薪械 写芯谢卸薪邪 斜褘褌褜 屑械薪褜褕械 6 懈谢懈 斜芯谢褜褕械 16.',
+ spwn: '袩邪褉芯谢褜 锌芯写褌胁械褉卸写械薪懈褟 薪械 屑芯卸械褌 斜褘褌褜 锌褍褋褌褘屑',
+ depass: '袛胁邪 褉邪蟹薪褘褏 锌邪褉芯谢褟.',
+ },
+ register: {
+ registerSuccessful: '袪械谐懈褋褌褉邪褑懈褟 褍褋锌械褕薪芯',
+ newuserregister: '袧芯胁褘泄 褉械械褋褌褉 锌芯谢褜蟹芯胁邪褌械谢械泄',
+ name: '袠屑褟锛�',
+ inputname: '袙胁械写懈褌械 懈屑褟',
+ password: '袣芯写:',
+ pwErr: '袙胁械写懈褌械 锌邪褉芯谢褜.',
+ passwordation: '袩芯写褌胁械褉写懈褌械 锌邪褉芯谢褜:',
+ pwErration: '袩芯卸邪谢褍泄褋褌邪, 锌芯写褌胁械褉褌懈褌械 锌邪褉芯谢褜',
+ registration: '袩芯写褌胁械褉卸写械薪懈械 芯 褉械谐懈褋褌褉邪褑懈懈',
+ false: '袨褌屑械薪邪',
+ },
+ main: {
+ connectErr: '袧械芯斜褘褔薪芯械 锌芯写泻谢褞褔械薪懈械 泻 褋械褉胁械褉褍, 锌芯锌褉芯斜褍泄褌械 锌芯蟹卸械',
+ titleFirst: "袛芯斜褉芯 锌芯卸邪谢芯胁邪褌褜 ",
+ titleLast: ' 胁 褋懈褋褌械屑褍 NorthGlass MES锛�',
+ quit: "袙褘褏芯写",
+ },
+ basicData: {
+ deletemessage: '校写邪谢懈褌褜 褝褌褍 懈薪褎芯褉屑邪褑懈褞 懈谢懈 薪械褌?',
+ laserprinting: '袦邪褕懈薪邪 谢邪蟹械褉薪芯泄 屑邪褉泻懈褉芯胁泻懈 谐芯褌芯胁邪锛�',
+ cuttingmachine: '袦邪褕懈薪邪 写谢褟 褉械蟹泻懈 谐芯褌芯胁邪锛�',
+ machine: '小芯褋褌芯褟薪懈械 褋褌邪薪芯泻 蟹邪谐褉褍蟹泻懈 胁 褉械卸懈屑械 芯薪谢邪泄薪锛�',
+ machineaa: '袪褍褔薪芯械 褋芯褋褌芯褟薪懈械 褋褌邪薪芯泻 蟹邪谐褉褍蟹泻懈:',
+ selectproject: "袙褘斜械褉懈褌械 锌褉芯械泻褌",
+ startloading: '袧邪褔邪谢芯 蟹邪谐褉褍蟹泻懈',
+ stop: '袩邪褍蟹邪',
+ yes: '锌芯写褌胁械褉写',
+ change: '锌械褉械泻谢褞褔邪',
+ projectnumber: '袧芯屑械褉 锌褉芯械泻褌邪',
+ glasswidth: '楔懈褉懈薪邪 褋褌械泻谢邪',
+ glassheight: '袙褘褋芯褌邪 褋褌械泻谢邪',
+ coatingtypes: '孝懈锌褘 锌芯泻褉褘褌懈泄',
+ coatingtypesa: '孝懈锌褘 锌芯泻褉褘褌懈泄锛�',
+ quantity: '袣芯谢懈褔械褋褌胁芯',
+ quantitya: '袣芯谢懈褔械褋褌胁芯锛�',
+ thickness: '孝芯谢褖懈薪邪',
+ thicknessa: '孝芯谢褖懈薪邪锛�',
+ startstatus: '小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈',
+ pass: '效械褉械蟹',
+ waiting: '袞写械屑.',
+ up: '袟邪谐褉褍蟹泻邪',
+ finish: '袟邪胁械褉褕械薪芯',
+ project: '懈薪卸械薪械褉懈褟',
+ plselectproject: '袩芯卸邪谢褍泄褋褌邪, 胁褘斜械褉懈褌械 锌褉芯械泻褌.',
+ confirm: '锌芯写褌胁械褉写',
+ cancel: '袨褌屑械薪邪',
+ startfilm: '袧邪褔懈薪邪褌褜 懈谢懈 薪械褌锛�',
+ whetherpause: '袩邪褍蟹邪 懈谢懈 薪械褌锛�',
+ station: '袪邪斜芯褔械械 屑械褋褌芯',
+ width: '楔懈褉懈薪邪',
+ widtha: '楔懈褉懈薪邪锛�',
+ height: '袙褘褋芯褌邪',
+ heighta: '袙褘褋芯褌邪锛�',
+ operate: '袨锌械褉邪褑懈褟',
+ add: '袛芯斜邪胁谢褟',
+ delete: '校写邪谢',
+ addglass: '袛芯斜邪胁懈褌褜 褋褌械泻谢芯',
+ selectwidth: '袙褘斜懈褉懈褌械 褕懈褉懈薪褍',
+ selectheight: '袙褘斜懈褉懈褌械 胁褘褋芯褌褍',
+ selectcoatingtypes: '袙褘斜械褉懈褌械 褌懈锌褘 锌芯泻褉褘褌懈泄',
+ selectthickness: '袙褘斜械褉懈褌械 褌芯谢褖懈薪褍',
+ selectquantity: '袙胁械写懈褌械 泻芯谢褜褔械褋褌胁芯.',
+ pause: '袙褌芯褉邪褟 懈 褔械褌胁械褉褌邪褟 褋褌褉芯泻懈 写芯谢卸薪褘 斜褘褌褜 胁褘褕械 2700 写谢褟 褋芯褏褉邪薪械薪懈褟!',
+ pausea: '袩芯卸邪谢褍泄褋褌邪, 褍斜械写懈褌械褋褜, 褔褌芯 屑邪褉泻懈褉芯胁芯褔薪邪褟 懈 褉械卸褍褖邪褟 屑邪褕懈薪褘 谐芯褌芯胁褘!',
+ infonull: '袧芯屑械褉 锌褉芯械泻褌邪 薪械 屑芯卸械褌 斜褘褌褜 锌褍褋褌褘屑!',
+ updatanull: '袩褉芯械泻褌 薪械 褋芯褏褉邪薪懈谢懈褋褜 薪邪 谢懈褋褌械 蟹邪谐褉褍蟹泻懈!',
+ glassnull: '袨褕懈斜泻邪 锌褉懈 芯斜薪芯胁谢械薪懈懈 褋褌械泻谢邪',
+ },
+ sorter: {
+ gridnumber: '携褔械械泻 褋械褌泻谢邪',
+ glassnumber: '袧芯屑械褉 褋褌邪泻谢邪',
+ width: '楔懈褉懈薪邪',
+ height: '袙褘褋芯褌邪',
+ startstatus: '小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈',
+ disable: '袨褌泻谢褞褔',
+ start: '袧邪褔邪谢芯',
+ deficiencieste: '袧械写芯褋褌邪褌泻懈 胁 芯褌褔械褌薪芯褋褌懈',
+ operate: '袨锌械褉邪褑懈褟',
+ prompt: '袩芯写褋泻邪蟹泻',
+ information: '小谢械写褍械褌 谢懈 褋芯芯斜褖邪褌褜 薪械写芯褋褌邪褞褖褍褞 懈薪褎芯褉屑邪褑懈褞锛�',
+ yes: '袛邪',
+ cancel: '袨褌屑械薪邪',
+ },
+ order: {
+ dilapidation: '袩芯胁褉械卸写械薪懈械',
+ Takeaway: '袙蟹褟褌褜 胁褉褍褔薪褍褞',
+ },
+
+ searchOrder: {
+ cageinformation: '袠薪褎芯褉屑邪褑懈褟 斜褍褎械褉邪',
+ productionqueue: '袩褉芯懈蟹胁芯写褋褌胁械薪薪邪褟 芯褔械褉械写褜',
+ outputglassID: '袙褘褏芯写薪芯械 褋褌械泻谢芯 ID',
+ startposition: '袟邪薪褟褌褜 锌芯蟹懈褑懈懈',
+ targetlocation: '袩芯蟹懈褑懈褟 褑械谢懈',
+ trips: '鈩� 锌芯械蟹写邪',
+ number: '小械褉懈泄薪 薪芯屑械褉',
+ taskstatus: '小芯褋褌芯褟薪懈械 蟹邪写邪褔懈',
+ filmenter: '袨卸懈写邪薪懈械 褋褌械泻谢褟薪薪芯泄 胁褏芯写',
+ infilm: '袙 薪邪褋褌芯褟褖械械 胁褉械屑褟',
+ endtask: '袟邪写邪褔邪 薪邪 泻芯薪械褑',
+ completetask: '袙褘锌芯谢薪械薪懈械 蟹邪写邪薪懈褟',
+ intoglassid: '袙褏芯写薪芯泄 褋褌械泻谢褟薪薪褘泄 ID',
+ line: '袥懈薪懈褟',
+ Usage: '小泻芯褉芯褋褌褜 懈褋锌芯谢褜蟹芯胁邪薪懈褟',
+ free: '袘械褋锌谢邪褌薪芯 (褟褔械械泻)',
+ addcage: '袛芯斜邪胁懈褌褜 懈薪褎芯褉屑邪褑懈褞 芯 斜褍褎械褉械',
+ glassIDa: '小褌械泻谢褟薪薪褘泄 ID锛�',
+ glassID: '小褌械泻谢褟薪薪褘泄 ID',
+ inglassID: '袙胁械写懈褌械 褋褌械泻谢芯 ID',
+ pieceingrid: '袩芯褉褟写芯泻 褉邪褋锌芯谢芯卸械薪懈褟 屑邪谢械薪褜泻懈褏 褋褌械泻谢褟薪薪褘褏 锌谢邪褋褌懈薪 胁 泻谢械褌泻械',
+ pieceingrida: '袩芯褉褟写芯泻 褉邪褋锌芯谢芯卸械薪懈褟 屑邪谢械薪褜泻懈褏 褋褌械泻谢褟薪薪褘褏 锌谢邪褋褌懈薪 胁 泻谢械褌泻械锛�',
+ inpieceingrid: '袙胁械写懈褌械 锌芯褉褟写芯泻 褉邪褋锌芯谢芯卸械薪懈褟 褋褌械泻谢褟薪薪褘褏 谢懈褋褌芯胁 胁 褟褔械械泻械',
+ cardnumber: '袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪',
+ cardnumbera: '袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪锛�',
+ incardnumber: '袙胁械写懈褌械 薪芯屑械褉 锌褉芯褑械褋褋邪 .',
+ typeglass: '孝懈锌 褋褌械泻谢邪',
+ typeglassa: '孝懈锌 褋褌械泻谢邪锛�',
+ intypeglass: '袙胁械写懈褌械 褌懈锌 褋褌械泻谢邪',
+ coatingtypes: '孝懈锌褘 锌芯泻褉褘褌懈泄',
+ width: '楔懈褉懈薪邪',
+ widtha: '楔懈褉懈薪邪锛�',
+ inwidth: '袙胁械写懈褌械 褕懈褉懈薪褍',
+ height: '袙褘褋芯褌邪',
+ heighta: '袙褘褋芯褌邪锛�',
+ inheight: '袙胁械写懈褌械 胁褘褋芯褌褍',
+ thickness: '孝芯谢褖懈薪邪',
+ thicknessa: '孝芯谢褖懈薪邪锛�',
+ inthickness: '袙胁械写懈褌械 褌芯谢褖懈薪褍.',
+ layoutID: '效械褉褌械卸 ID 蟹邪谐褉褍蟹泻懈 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈',
+ layoutIDa: '效械褉褌械卸 ID 蟹邪谐褉褍蟹泻懈 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈锛�',
+ inlayoutID: '袙胁械写懈褌械 褔械褉褌械卸 蟹邪泻邪谢泻懈 ID',
+ picturesequence: '效械褉褌械卸 褋械褉懈泄薪 薪芯屑械褉 蟹邪谐褉褍蟹泻懈 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈',
+ picturesequencea: '效械褉褌械卸 褋械褉懈泄薪 薪芯屑械褉 蟹邪谐褉褍蟹泻懈 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈锛�',
+ inpicturesequence: '袙胁械写懈褌械 锌芯褉褟写芯泻 褔械褉褌械卸懈 蟹邪泻邪谢泻懈 褋褌械泻谢邪.',
+ startstatus: '小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈',
+ startstatusa: '小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈锛�',
+ instartstatus: '袙胁械写懈褌械 褋芯褋褌芯褟薪懈械 邪泻褌懈胁邪褑懈懈',
+ glassgaps: '小褌械泻谢褟薪薪褘泄 蟹邪蟹芯褉',
+ glassgapsa: '小褌械泻谢褟薪薪褘泄 蟹邪蟹芯褉锛�',
+ inglassgaps: '袙胁械写懈褌械 褋褌械泻谢芯 蟹邪蟹芯褉',
+ sure: '锌芯写褌胁械褉写',
+ cancel: '袨褌屑械薪邪',
+ operate: '袨锌械褉邪褑懈褟',
+ breakage: '袩芯胁褉械卸写械薪懈械',
+ delete: '校写邪谢',
+ outfilm: '袙褘锌褍褋泻 褋褌械泻谢邪',
+ cagetableID: 'ID 斜褍褎械褉薪芯泄 褌邪斜谢懈褑褘',
+ cagenumber: '袘褍褎械褉 薪芯屑械褉邪',
+ gridnumber: '携褔械械泻 褋械褌泻谢邪',
+ enable: '袧邪褔邪谢芯',
+ disable: '袨褌泻谢褞褔',
+ remainingwidth: '袨褋褌邪褌芯褔薪邪褟 褕懈褉懈薪邪',
+ add: '袛芯斜邪胁谢褟',
+ sheetID: '袟邪泻邪谢泻邪 屑邪谢械薪褜泻懈泄 褋褌械泻谢褟薪薪褘泄 ID 褌邪斜谢懈褑褘 懈薪褎芯褉屑邪褑懈懈',
+ processcards: '袣邪褉褌芯褔泻邪 锌褉芯褑械褋褋邪',
+ processcardtype: '孝懈锌 褋褌械泻谢邪 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪',
+ acceptshorizontal: '校屑械褉械薪薪芯械 锌褉懈薪褟褌懈械 谐芯褉懈蟹芯薪褌邪谢懈',
+ xcoordinates: 'X-泻芯芯褉写懈薪邪褌褘',
+ ycoordinates: 'Y-泻芯芯褉写懈薪邪褌褘',
+ rotationangle: '校谐芯谢 胁褉邪褖械薪懈褟 (锌褉芯褌懈胁 褔邪褋芯胁芯泄 褋褌褉械谢泻懈)',
+ state: '小芯褋褌芯褟薪懈械',
+ takeout: '袙蟹褟褌褜',
+ deletemessage: '校写邪谢懈褌褜 褝褌褍 懈薪褎芯褉屑邪褑懈褞 懈谢懈 薪械褌?',
+ prompt: '袩芯写褋泻邪蟹泻',
+ yes: '袛邪',
+ accept: '袩褉懈薪褟褌褜',
+ noaccept: '袧械 锌褉懈薪懈屑邪褌褜',
+ filmcomplete: '小褌械泻谢芯 谐芯褌芯胁芯',
+ waiting: '袞写械屑.',
+ },
+ workOrder: {
+ glassID: '小褌械泻谢褟薪薪褘泄 ID',
+ height: '袙褘褋芯褌邪',
+ width: '楔懈褉懈薪邪',
+ thickness: '孝芯谢褖懈薪邪',
+ coatingtypes: '孝懈锌褘 锌芯泻褉褘褌懈泄',
+ productionsequence: '袩芯褋谢械写芯胁邪褌械谢褜薪芯褋褌褜 锌褉芯懈蟹胁芯写褋褌胁邪',
+ cardnumber: '袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪',
+ operate: '袨锌械褉邪褑懈褟',
+ messagedamaged: '袩芯胁褉械卸写械薪芯 谢懈 褋芯芯斜褖械薪懈械锛�',
+ prompt: '袩芯写褋泻邪蟹泻',
+ yes: '袛邪',
+ cancel: '袨褌屑械薪邪',
+ takemessage: '小谢械写褍械褌 谢懈 褍写邪谢褟褌褜 褋芯芯斜褖械薪懈械锛�',
+ breakage: '袩芯胁褉械卸写械薪懈械',
+ takeout: '袙蟹褟褌褜',
+ },
+ processCard: {
+ intofurnace: '袙 锌械褔褜',
+ beforefurnace: '袛芯 锌械褔泻懈.',
+ outfurnace: '袨泻芯薪褔械薪芯 褋褌械泻谢芯 懈蟹 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈',
+ },
+ reportWork: {
+ lowerbit: '小褌邪薪褑懈褟 褉邪蟹谐褉褍蟹泻懈',
+ shelfnumber: '袧芯屑械褉 褋褌芯泄泻懈 褉械谐懈褋褌褉邪褑懈懈',
+ cardnumber: '袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪',
+ totalquantity: '袨斜褖械械 泻芯谢懈褔械褋褌胁芯',
+ beendropped: '袣芯谢懈褔械褋褌胁芯 褋褌械泻谢邪 褉邪蟹谐褉褍蟹泻懈',
+ state: '小芯褋褌芯褟薪懈械',
+ devicenumber: '袧芯屑械褉 芯斜芯褉褍写芯胁邪薪懈褟.',
+ startstatus: '小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈',
+ enable: '袧邪褔邪谢芯',
+ unenable: '袧械 薪邪褔邪褌',
+ operate: '袨锌械褉邪褑懈褟',
+ bindingshelves: '袧邪蟹薪邪褔械薪薪邪褟 褋褌械谢谢邪卸泻邪',
+ clear: '效懈褋褌芯.',
+ workstation: '小褌邪薪褑懈褟 薪芯屑械褉',
+ cardnumbera: '袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪锛�',
+ incardnumber: '袩芯卸邪谢褍泄褋褌邪, 胁褘斜械褉懈褌械 薪芯屑械褉 锌褉芯谐褉邪屑屑褘',
+ clearglass: '袨褔懈褋褌懈褌褜 褋褌械泻谢芯 褋 锌芯谢泻懈',
+ sure: '锌芯写褌胁械褉写',
+ cancel: '袨褌屑械薪邪',
+ glassinformation: '袠薪褎芯褉屑邪褑懈褟 褋褌械泻谢邪',
+ glassID: '小褌械泻谢褟薪薪褘泄 ID',
+ coatingtypes: '孝懈锌褘 锌芯泻褉褘褌懈泄',
+ thickness: '孝芯谢褖懈薪邪',
+ width: '楔懈褉懈薪邪',
+ height: '袙褘褋芯褌邪',
+ },
+ productStock: {
+ addusers: '袛芯斜邪胁褜褌械 锌芯谢褜蟹芯胁邪褌械谢械泄.',
+ username: '袠屑褟 锌芯谢褜蟹芯胁邪褌械谢褟.',
+ usernamea: '袠屑褟 锌芯谢褜蟹芯胁邪褌械谢褟.锛�',
+ inusername: '袙胁械写懈褌械 懈屑褟 锌芯谢褜蟹芯胁邪褌械谢褟',
+ role: '袪芯谢褜',
+ rolea: '袪芯谢褜锛�',
+ inrole: '袙褘斜械褉懈褌械 褉芯谢褜',
+ test: '孝械褋褌',
+ admin: '袗写屑懈薪懈褋褌褉邪褌芯褉.',
+ operate: '袨锌械褉邪褑懈褟',
+ resetpassword: '小斜褉芯褋懈褌褜 锌邪褉芯谢褜',
+ exit: '袪械写邪泻褌芯褉',
+ delete: '校写邪谢',
+ prompt: '袩芯写褋泻邪蟹泻',
+ repassword: '袩械褉械蟹邪谐褉褍蟹泻邪 锌芯谢褜蟹芯胁邪褌械谢褜褋泻芯谐芯 锌邪褉芯谢褟 懈谢懈 薪械褌锛�',
+ yes: '袛邪',
+ cancel: '袨褌屑械薪邪',
+ reusername: '袠蟹屑械薪械薪懈械 锌芯谢褜蟹芯胁邪褌械谢褟',
+ addusername: '袛芯斜邪胁褜褌械 锌芯谢褜蟹芯胁邪褌械谢械泄.',
+ password: '袣芯写锛�',
+ sure: '锌芯写褌胁械褉写',
+ inpassword: '袙胁械写懈褌械 锌邪褉芯谢褜.',
+ deusername: '校写邪谢械薪懈械 锌芯谢褜蟹芯胁邪褌械谢褟 懈谢懈 薪械褌锛�',
+ },
+ customer: {
+ addmenu: '袛芯斜邪胁褜褌械 屑械薪褞.',
+ firstmenu: '孝邪斜谢懈褑邪 屑械薪褞 锌械褉胁芯泄 褋褌械锌械薪懈',
+ link: '小褋褘谢泻',
+ linka: '小褋褘谢泻锛�',
+ inlink: '袙胁械写懈褌械 褋褋褘谢泻褍',
+ sort: '小芯褉褌懈褉芯胁泻',
+ sorta: '小芯褉褌懈褉芯胁泻锛�',
+ insort: '袙胁械写懈褌械 褋芯褉褌懈褉芯胁泻褍',
+ operate: '袨锌械褉邪褑懈褟',
+ exit: '袪械写邪泻褌芯褉',
+ inmenu: '袙胁械写懈褌械 屑械薪褞',
+ delete: '校写邪谢',
+ semenu: '孝邪斜谢懈褑邪 屑械薪褞 胁褌芯褉芯泄 褋褌械锌械薪懈',
+ menu: '袦械薪褞.锛�',
+ sure: '锌芯写褌胁械褉写',
+ cancel: '袨褌屑械薪邪',
+ exmene: '袠蟹屑械薪械薪懈械 屑械薪褞.',
+ yes: '袛邪',
+ demenu: '校写邪谢懈褌褜 屑械薪褞 懈谢懈 薪械褌锛�',
+ prompt: '袩芯写褋泻邪蟹泻',
+ },
+ delivery: {
+ addrole: '袛芯斜邪胁褜褌械 褉芯谢懈.',
+ editrole: '袠蟹屑械薪械薪懈械 褉芯谢懈.',
+ role: '袪芯谢褜',
+ rolea: '袪芯谢褜锛�',
+ inrole: '袙胁械写懈褌械 褉芯谢懈.',
+ operate: '袨锌械褉邪褑懈褟',
+ edit: '袪械写邪泻褌芯褉',
+ delete: '校写邪谢',
+ sure: '锌芯写褌胁械褉写',
+ cancel: '袨褌屑械薪邪',
+ yes: '袛邪',
+ derole: '校写邪谢懈褌褜 锌械褉褋芯薪邪卸 懈谢懈 薪械褌锛�',
+ prompt: '袩芯写褋泻邪蟹泻',
+ },
+}
\ No newline at end of file
diff --git a/UI-Project/src/layout/MainErpView.vue b/UI-Project/src/layout/MainErpView.vue
index e2f4b57..2c1ad75 100644
--- a/UI-Project/src/layout/MainErpView.vue
+++ b/UI-Project/src/layout/MainErpView.vue
@@ -3,14 +3,14 @@
import userInfo from '@/stores/userInfo'
import request from '@/utils/request'
import {ElMessage} from 'element-plus'
-import {ref, watch, onMounted } from 'vue'
-import deepClone from '@/utils/deepClone'
-import { useRouter } from 'vue-router';
-import { useI18n } from 'vue-i18n'
- const { t } = useI18n()
- let language = ref(localStorage.getItem('lang') || 'zh')
+import {ref, watch} from 'vue'
+import {useRouter} from 'vue-router';
+import {useI18n} from 'vue-i18n'
+
+const {t} = useI18n()
+let language = ref(localStorage.getItem('lang') || 'zh')
const store = userInfo()
-const isCollapse = ref(false);
+const isCollapse = ref(false);
// const { $i18n } = useI18n(); // 鑾峰彇 i18n 瀹炰緥
const router = useRouter()
const userStore = useUserInfoStore()
@@ -22,108 +22,99 @@
// let userInfo = userInfoStr.user.token;
let token = userInfo; // 鎻愬彇 token
// 閫�鍑虹櫥褰曟柟娉�
-function quit() {
+function quit() {
// localStorage.removeItem('token');
store.$patch({
- user: null,
- })
- router.push('/login')
+ user: null,
+ })
+ router.push('/login')
}
-// const quit = async () => {
-// try {
-// store.$patch({user: null})
-// const response = await request.post('/loadGlass/sys/user/logout')
-// if (response.code === 200) {
-// console.log('鐧诲嚭鎴愬姛');
-// } else {
-// // 澶勭悊閿欒鎯呭喌
-// console.error('鐧诲嚭澶辫触', response);
-// }
-// }
-// catch (error) {
-// // 澶勭悊閿欒
-// console.error(error);
-// }
-// }
-// store.createWebSocket();
-// function quit() {
-// userStore.$patch({
-// user: null,
-// })
-// // router.push('/login')
-// request.get("/loadGlass/sys/user/login").then((res) => {
-// if (res.code === 200) {
-// ElMessage.success(res.msg);
-// console.log(res.data);
-// } else {
-// ElMessage.warning(res.msg);
-// // router.push("/login");
-// }
-// });
-// }
-
- function replaceChineseWithEnglish(menuData) {
- // 瀹氫箟涓嫳鏂囧鐓у叧绯诲璞�
- const translation = {
- '涓婄墖鏈�': '小褌芯谢 蟹邪谐褉褍蟹泻懈',
- '鎺扮墖/璇嗗埆': '袪邪蟹谢芯屑/懈写械薪褌懈褎懈泻邪褑懈褟',
- '鍗у紡缂撳瓨': ' 袚芯褉懈蟹芯薪褌邪谢褜薪褘泄 斜褍褎械褉',
- '纾ㄨ竟鍓嶅崸寮忕紦瀛�': '袚芯褉懈蟹芯薪褌邪谢褜薪褘泄 斜褍褎械褉 锌械褉械写 褕谢懈褎芯胁泻芯泄',
- '涓嬬墖鍗у紡缂撳瓨': '袚芯褉懈蟹芯薪褌邪谢褜薪褘泄 斜褍褎械褉 褋褌械泻谢邪 褉邪蟹谐褉褍蟹泻懈',
- '纾ㄨ竟锛堝喎鍔犲伐锛�': '楔谢懈褎芯胁邪褌褜 泻褉邪褟 (褏芯谢芯写薪邪褟 芯斜褉邪斜芯褌泻邪)',
- '1绾跨（杈�(鍐峰姞宸�)': '楔谢懈褎芯胁邪褌褜 泻褉邪褟 1 谢懈薪懈懈 (褏芯谢芯写薪邪褟 芯斜褉邪斜芯褌泻邪)',
- '2绾跨（杈�(鍐峰姞宸�)': '楔谢懈褎芯胁邪褌褜 泻褉邪褟 2 谢懈薪懈懈 (褏芯谢芯写薪邪褟 芯斜褉邪斜芯褌泻邪)',
- '澶х悊鐗囩': '袘褍褎械褉薪邪褟 褋懈褋褌械屑邪',
- '閽㈠寲': '袟邪泻邪谢泻邪',
- '閽㈠寲鍓�': '袩械褉械写 蟹邪泻邪谢泻懈',
- '閽㈠寲鍚�': '袩芯褋谢械 蟹邪泻邪谢泻懈',
- '涓嬬墖鍙�': '小褌芯谢 褉邪蟹谐褉褍蟹泻懈',
- '绯荤粺绠＄悊': '校锌褉邪胁谢械薪懈械 褋懈褋褌械屑芯泄',
- '鐢ㄦ埛绠＄悊': '校锌褉邪胁谢械薪懈械 锌芯谢褜蟹芯胁邪褌械谢械屑',
- '鏉冮檺绠＄悊': '校锌褉邪胁谢械薪懈械 锌芯谢薪芯屑芯褔懈褟屑懈',
- '瑙掕壊绠＄悊': '校锌褉邪胁谢械薪懈械 褉芯谢褜褞',
- };
- menuData.forEach(menu => {
- menu.menuName = translation[menu.menuName] || menu.menuName;
+function replaceChineseWithEnglish(menuData) {
+ // 瀹氫箟涓縿鏂囧鐓у叧绯诲璞�
+ const translation = {
+ '涓婄墖鏈�': '小褌芯谢 蟹邪谐褉褍蟹泻懈',
+ '涓婄墖': '袙械褉褏薪褟褟 褔邪褋褌褜',
+ '鎺扮墖/璇嗗埆': '袪邪蟹谢芯屑/懈写械薪褌懈褎懈泻邪褑懈褟',
+ '鍗у紡缂撳瓨': ' 袚芯褉懈蟹芯薪褌邪谢褜薪褘泄 斜褍褎械褉',
+ '纾ㄨ竟鍓嶅崸寮忕紦瀛�': '袚芯褉懈蟹芯薪褌邪谢褜薪褘泄 斜褍褎械褉 锌械褉械写 褕谢懈褎芯胁泻芯泄',
+ '涓嬬墖鍗у紡缂撳瓨': '袚芯褉懈蟹芯薪褌邪谢褜薪褘泄 斜褍褎械褉 褋褌械泻谢邪 褉邪蟹谐褉褍蟹泻懈',
+ '纾ㄨ竟锛堝喎鍔犲伐锛�': '楔谢懈褎芯胁邪褌褜 泻褉邪褟 (褏芯谢芯写薪邪褟 芯斜褉邪斜芯褌泻邪)',
+ '1绾跨（杈�(鍐峰姞宸�)': '楔谢懈褎芯胁邪褌褜 泻褉邪褟 1 谢懈薪懈懈 (褏芯谢芯写薪邪褟 芯斜褉邪斜芯褌泻邪)',
+ '2绾跨（杈�(鍐峰姞宸�)': '楔谢懈褎芯胁邪褌褜 泻褉邪褟 2 谢懈薪懈懈 (褏芯谢芯写薪邪褟 芯斜褉邪斜芯褌泻邪)',
+ '澶х悊鐗囩': '袘褍褎械褉薪邪褟 褋懈褋褌械屑邪',
+ '閽㈠寲': '袟邪泻邪谢泻邪',
+ '閽㈠寲鍓�': '袩械褉械写 蟹邪泻邪谢泻懈',
+ '閽㈠寲鍚�': '袩芯褋谢械 蟹邪泻邪谢泻懈',
+ '涓嬬墖鍙�': '小褌芯谢 褉邪蟹谐褉褍蟹泻懈',
+ '绯荤粺绠＄悊': '校锌褉邪胁谢械薪懈械 褋懈褋褌械屑芯泄',
+ '鐢ㄦ埛绠＄悊': '校锌褉邪胁谢械薪懈械 锌芯谢褜蟹芯胁邪褌械谢械屑',
+ '鏉冮檺绠＄悊': '校锌褉邪胁谢械薪懈械 锌芯谢薪芯屑芯褔懈褟屑懈',
+ '瑙掕壊绠＄悊': '校锌褉邪胁谢械薪懈械 褉芯谢褜褞',
+ '鍙鍖栫郴缁�': '袙懈蟹褍邪谢褜薪邪褟 褋懈褋褌械屑邪',
+ '鎶ュ伐绠＄悊': '校锌褉邪胁谢械薪懈械 芯褌褔械褌薪芯褋褌褜褞',
+ '浠撳偍涓績': '小泻谢邪写褋泻芯泄 褑械薪褌褉',
+ '鍘熺墖浠撳偍': '小泻谢邪写 褋褘褉褜褟',
+ };
+ menuData.forEach(menu => {
+ menu.menuName = translation[menu.menuName] || menu.menuName;
// if (menu.children) {
- menu.children && menu.children.forEach(submenu => {
- submenu.menuName = translation[submenu.menuName] || submenu.menuName;
- });
+ menu.children && menu.children.forEach(submenu => {
+ submenu.menuName = translation[submenu.menuName] || submenu.menuName;
+ });
// }
- });
+ });
+}
+
+function replaceChineseWithRussian(menuData) {
+ // 瀹氫箟涓嫳鏂囧鐓у叧绯诲璞�
+ const translation = {
+ '涓婄墖鏈�': 'Loading Machine',
+ '涓婄墖': 'Start showing a movie',
+ '鎺扮墖/璇嗗埆': 'Breaking /Identification',
+ '鍗у紡缂撳瓨': 'Horizontal cache',
+ '纾ㄨ竟鍓嶅崸寮忕紦瀛�': 'Horizontal buffer before edge grinding',
+ '涓嬬墖鍗у紡缂撳瓨': 'Offline horizontal cache',
+ '纾ㄨ竟锛堝喎鍔犲伐锛�': 'Grinding edge (cold processing)',
+ '1绾跨（杈�(鍐峰姞宸�)': '1-line edge grinding (cold processing)',
+ '2绾跨（杈�(鍐峰姞宸�)': '2-line edge grinding (cold processing)',
+ '澶х悊鐗囩': 'Dali slice cage',
+ '閽㈠寲': 'Toughened',
+ '閽㈠寲鍓�': 'Before Tempering',
+ '閽㈠寲鍚�': 'After Tempering',
+ '涓嬬墖鍙�': 'Next Stage',
+ '绯荤粺绠＄悊': 'System Management',
+ '鐢ㄦ埛绠＄悊': 'User Management',
+ '鏉冮檺绠＄悊': 'Rights Management',
+ '瑙掕壊绠＄悊': 'Roles',
+ '鍙鍖栫郴缁�': 'visualization system',
+ '鎶ュ伐绠＄悊': 'Job reporting management',
+ '浠撳偍涓績': 'Storage Center',
+ '鍘熺墖浠撳偍': 'Original film storage',
+ };
+ menuData.forEach(menu => {
+ menu.menuName = translation[menu.menuName] || menu.menuName;
+ // if (menu.children) {
+ menu.children && menu.children.forEach(submenu => {
+ submenu.menuName = translation[submenu.menuName] || submenu.menuName;
+ });
+ // }
+ });
}
//鎻愬彇鑿滃崟妯″潡鍒楄〃
let menuList = $ref([])
-// onMounted(async () => {
-// try {
-// const res = await request.get('/loadGlass/sys/menu/getMenuTree'); // 鍋囪 request.get 杩斿洖 Promise
-// if (res.code == 200) {
-// // 浣跨敤 value 灞炴�ф潵淇敼 ref 寮曠敤鐨勫��
-// menuList.value = deepClone(res.data);
-// const language = $i18n.locale;
-// if (language === 'en') {
-// replaceChineseWithEnglish(menuList.value); // 浼犲叆 ref 鐨� value
-// }
-// console.log(res.data.token); // 濡傛灉 res.data 涓湁 token 鐨勮瘽
-// } else {
-// ElMessage.warning(res.msg);
-// router.push('/login');
-// }
-// } catch (error) {
-// // 澶勭悊璇锋眰閿欒
-// console.error('鑾峰彇鑿滃崟鍒楄〃鏃跺嚭閿�:', error);
-// }
-// });
request.get('/loadGlass/sys/menu/getMenuTree').then((res) => {
if (res.code == 200) {
menuList = res.data
console.log(language.value)
- if (language.value === 'en') {
-
- replaceChineseWithEnglish(menuList);
- }
+ // translateMenu(menuList.value, language.value);
+ if (language.value === 'en') {
+ replaceChineseWithRussian(menuList);
+ }
+ if (language.value === 'py') {
+ replaceChineseWithEnglish(menuList);
+ }
} else {
ElMessage.warning(res.msg)
router.push('/login')
@@ -169,7 +160,7 @@
<el-header>
<div style="height: 100%;width: 100%;display: flex;background-color: #fff;">
<img src="../assets/northGlass.ico"
- alt=""
+ alt="" @click="toggleCollapse"
style="max-width: 100%;max-height: 100%">
<h3 style="margin: 1rem ;font-weight: bold;width: 33vw;"> {{ $t('main.titleFirst') }}{{ userName }}{{ $t('main.titleLast') }}</h3>
<span style="height: 70%;width: 78vw;margin-top: 1rem;">
@@ -187,11 +178,11 @@
<SwitchButton size=""/>{{ $t('main.quit') }}
</el-icon>
</el-button>
- <div class="header-left">
+ <!-- <div class="header-left">
<el-button @click="toggleCollapse" style="height: 30px;">
<el-icon><Expand /></el-icon>
</el-button>
- </div>
+ </div> -->
</span>
</div>
</el-header>
diff --git a/UI-Project/src/views/LoginView.vue b/UI-Project/src/views/LoginView.vue
index 6431f47..a700274 100644
--- a/UI-Project/src/views/LoginView.vue
+++ b/UI-Project/src/views/LoginView.vue
@@ -5,15 +5,16 @@
import {ElMessage} from 'element-plus'
import request from '@/utils/request'
import userInfo from '@/stores/userInfo'
-import { useI18n } from 'vue-i18n'
+import {useI18n} from 'vue-i18n'
+
const store = userInfo()
let ruleFormRef = ref<FormInstance>()
const router = useRouter()
const route = useRoute()
-const { t } = useI18n()
+const {t} = useI18n()
let language = ref(localStorage.getItem('lang') || 'zh')
-const changeLanguage = () =>{
- localStorage.setItem('lang',language.value)
+const changeLanguage = () => {
+ localStorage.setItem('lang', language.value)
location.reload()
}
const userForm = reactive({
@@ -129,8 +130,9 @@
v-model="language"
placeholder=" "
style="float: right;width: 9rem">
- <el-option value="zh" label="涓枃" />
- <el-option value="en" label="袪褍褋褋泻懈泄 褟蟹褘泻" />
+ <el-option value="zh" label="涓枃"/>
+ <el-option value="py" label="袪褍褋褋泻懈泄 褟蟹褘泻"/>
+ <el-option value="en" label="English"/>
</el-select>
<el-form @submit.native.prevent
ref="ruleFormRef"
--
Gitblit v1.8.0