From 0b8f1db9b9db6ec216091e953303a752c91aa307 Mon Sep 17 00:00:00 2001
From: wangfei <3597712270@qq.com>
Date: 星期四, 17 十月 2024 08:56:49 +0800
Subject: [PATCH] 被覆盖代码找回
---
UI-Project/src/lang/en.js | 1140 +++++++++++++++++++++++++++++++----------------------------
1 files changed, 605 insertions(+), 535 deletions(-)
diff --git a/UI-Project/src/lang/en.js b/UI-Project/src/lang/en.js
index eddcad4..0e3c60f 100644
--- a/UI-Project/src/lang/en.js
+++ b/UI-Project/src/lang/en.js
@@ -1,549 +1,619 @@
export default {
- "northglassMESsystem": '小懈褋褌械屑邪 "NorthGlass MES"' ,
+ "northglassMESsystem": "NorthGlass MES System",
login:{
- userErr:'袙胁械写懈褌械 薪芯屑械褉 褋褔械褌邪.',
- pwErr:'袙胁械写懈褌械 锌邪褉芯谢褜.',
- user:'袗泻泻邪褍薪褌',
- password:'袣芯写',
- login:'袟邪谢芯谐懈薪',
- loginSuccessful:'袙褏芯写 胁 褋懈褋褌械屑褍 胁褘锌芯谢薪械薪 褍褋锌械褕薪芯锛�',
- register:'袟邪褉械谐懈褋褌褉懈褉芯胁邪',
- namea:'袠屑褟 薪械 屑芯卸械褌 斜褘褌褜 锌褍褋褌褘屑',
- len:'袛谢懈薪邪 薪械 写芯谢卸薪邪 锌褉械胁褘褕邪褌褜 16',
- passnull:'袩邪褉芯谢褜 薪械 屑芯卸械褌 斜褘褌褜 锌褍褋褌褘屑',
- leng:'袛谢懈薪邪 锌邪褉芯谢褟 薪械 写芯谢卸薪邪 斜褘褌褜 屑械薪褜褕械 6 懈谢懈 斜芯谢褜褕械 16.',
- spwn:'袩邪褉芯谢褜 锌芯写褌胁械褉卸写械薪懈褟 薪械 屑芯卸械褌 斜褘褌褜 锌褍褋褌褘屑',
- depass:'袛胁邪 褉邪蟹薪褘褏 锌邪褉芯谢褟.',
+ userErr:'Please enter account number',
+ pwErr:'Please input a password',
+ user:'Account number',
+ password:'Password',
+ login:'Log on',
+ loginSuccessful:'Log on was successful锛�',
+ register:'Register',
+ namea:'Name cannot be empty',
+ len:'The length cannot exceed 16',
+ passnull:'Password cannot be empty',
+ leng:'The password length cannot be less than 6 or more than 16',
+ spwn:'Confirm password cannot be empty',
+ depass:'The two passwords are not the same',
},
register:{
- registerSuccessful:'袪械谐懈褋褌褉邪褑懈褟 褍褋锌械褕薪芯',
- newuserregister:'袧芯胁褘泄 褉械械褋褌褉 锌芯谢褜蟹芯胁邪褌械谢械泄',
- name:'袠屑褟锛�',
- inputname:'袙胁械写懈褌械 懈屑褟',
- password:'袣芯写:',
- pwErr:'袙胁械写懈褌械 锌邪褉芯谢褜.',
- passwordation:'袩芯写褌胁械褉写懈褌械 锌邪褉芯谢褜:',
- pwErration:'袩芯卸邪谢褍泄褋褌邪, 锌芯写褌胁械褉褌懈褌械 锌邪褉芯谢褜',
- registration:'袩芯写褌胁械褉卸写械薪懈械 芯 褉械谐懈褋褌褉邪褑懈懈',
- false:'袨褌屑械薪邪',
+ registerSuccessful:'login was successful',
+ newuserregister:'New user register',
+ name:'Full name锛�',
+ inputname:'Please enter your name',
+ password:'Password:',
+ pwErr:'Please input a password',
+ passwordation:'Confirm password:',
+ pwErration:'Please confirm password',
+ registration:'Registration Confirm',
+ false:'Cancel',
},
main:{
- connectErr:'袧械芯斜褘褔薪芯械 锌芯写泻谢褞褔械薪懈械 泻 褋械褉胁械褉褍, 锌芯锌褉芯斜褍泄褌械 锌芯蟹卸械',
- titleFirst:"袛芯斜褉芯 锌芯卸邪谢芯胁邪褌褜 ",
- titleLast:' 胁 褋懈褋褌械屑褍 NorthGlass MES锛�',
- quit:"袙褘褏芯写",
+ connectErr:'The server connection is abnormal. Please try again later',
+ titleFirst:"Welcome ",
+ titleLast:' to use NorthGlass MES system锛�',
+ quit:"Exit",
},
basicData:{
- deletemessage:'校写邪谢懈褌褜 褝褌褍 懈薪褎芯褉屑邪褑懈褞 懈谢懈 薪械褌?',
- laserprinting:'袦邪褕懈薪邪 谢邪蟹械褉薪芯泄 屑邪褉泻懈褉芯胁泻懈 谐芯褌芯胁邪锛�',
- cuttingmachine:'袦邪褕懈薪邪 写谢褟 褉械蟹泻懈 谐芯褌芯胁邪锛�',
- machine:'小芯褋褌芯褟薪懈械 褋褌邪薪芯泻 蟹邪谐褉褍蟹泻懈 胁 褉械卸懈屑械 芯薪谢邪泄薪锛�',
- machineaa:'袪褍褔薪芯械 褋芯褋褌芯褟薪懈械 褋褌邪薪芯泻 蟹邪谐褉褍蟹泻懈:',
- selectproject:"袙褘斜械褉懈褌械 锌褉芯械泻褌",
- startloading:'袧邪褔邪谢芯 蟹邪谐褉褍蟹泻懈',
- stop:'袩邪褍蟹邪',
- yes:'锌芯写褌胁械褉写',
- change:'锌械褉械泻谢褞褔邪',
- projectnumber:'袧芯屑械褉 锌褉芯械泻褌邪',
- glasswidth:'楔懈褉懈薪邪 褋褌械泻谢邪',
- glassheight:'袙褘褋芯褌邪 褋褌械泻谢邪',
- coatingtypes:'孝懈锌褘 锌芯泻褉褘褌懈泄',
- coatingtypesa:'孝懈锌褘 锌芯泻褉褘褌懈泄锛�',
- quantity:'袣芯谢懈褔械褋褌胁芯',
- quantitya:'袣芯谢懈褔械褋褌胁芯锛�',
- thickness:'孝芯谢褖懈薪邪',
- thicknessa:'孝芯谢褖懈薪邪锛�',
- startstatus:'小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈',
- pass:'效械褉械蟹',
- waiting:'袞写械屑.',
- up:'袟邪谐褉褍蟹泻邪',
- finish:'袟邪胁械褉褕械薪芯',
- project:'懈薪卸械薪械褉懈褟',
- plselectproject:'袩芯卸邪谢褍泄褋褌邪, 胁褘斜械褉懈褌械 锌褉芯械泻褌.',
- confirm:'锌芯写褌胁械褉写',
- cancel:'袨褌屑械薪邪',
- startfilm:'袧邪褔懈薪邪褌褜 懈谢懈 薪械褌锛�',
- whetherpause:'袩邪褍蟹邪 懈谢懈 薪械褌锛�',
- station:'袪邪斜芯褔械械 屑械褋褌芯',
- width:'楔懈褉懈薪邪',
- widtha:'楔懈褉懈薪邪锛�',
- height:'袙褘褋芯褌邪',
- heighta:'袙褘褋芯褌邪锛�',
- operate:'袨锌械褉邪褑懈褟',
- add:'袛芯斜邪胁谢褟',
- delete:'校写邪谢',
- addglass:'袛芯斜邪胁懈褌褜 褋褌械泻谢芯',
- selectwidth:'袙褘斜懈褉懈褌械 褕懈褉懈薪褍',
- selectheight:'袙褘斜懈褉懈褌械 胁褘褋芯褌褍',
- selectcoatingtypes:'袙褘斜械褉懈褌械 褌懈锌褘 锌芯泻褉褘褌懈泄',
- selectthickness:'袙褘斜械褉懈褌械 褌芯谢褖懈薪褍',
- selectquantity:'袙胁械写懈褌械 泻芯谢褜褔械褋褌胁芯.',
- pause:'袙褌芯褉邪褟 懈 褔械褌胁械褉褌邪褟 褋褌褉芯泻懈 写芯谢卸薪褘 斜褘褌褜 胁褘褕械 2700 写谢褟 褋芯褏褉邪薪械薪懈褟!',
- pausea:'袩芯卸邪谢褍泄褋褌邪, 褍斜械写懈褌械褋褜, 褔褌芯 屑邪褉泻懈褉芯胁芯褔薪邪褟 懈 褉械卸褍褖邪褟 屑邪褕懈薪褘 谐芯褌芯胁褘!',
- infonull:'袧芯屑械褉 锌褉芯械泻褌邪 薪械 屑芯卸械褌 斜褘褌褜 锌褍褋褌褘屑!',
- updatanull:'袩褉芯械泻褌 薪械 褋芯褏褉邪薪懈谢懈褋褜 薪邪 谢懈褋褌械 蟹邪谐褉褍蟹泻懈!',
- glassnull:'袨褕懈斜泻邪 锌褉懈 芯斜薪芯胁谢械薪懈懈 褋褌械泻谢邪',
+ laserprinting:'Laser printing machine ready status锛�',
+ cuttingmachine:'Cutting machine ready status锛�',
+ machine:'Online status of the loading table锛�',
+ machineaa:'Manual state of the loading table锛�',
+ selectproject:"Select project",
+ startloading:'Start loading',
+ stop:'Pause',
+ yes:'Confirm',
+ change:'Switch',
+ projectnumber:'Project number',
+ glasswidth:'Glass width',
+ glassheight:'Glass height',
+ coatingtypes:'Coating types',
+ coatingtypesa:'Coating types锛�',
+ quantity:'Quantity',
+ quantitya:'Quantity锛�',
+ thickness:'Thickness',
+ thicknessa:'Thickness锛�',
+ startstatus:'Start status',
+ pass:'Pass',
+ waiting:'Waiting',
+ up:'Loading',
+ finish:'Completed',
+ project:'Project ',
+ plselectproject:'Please select project',
+ confirm:'Confirm',
+ cancel:'Cancel',
+ startfilm:'Whether start loading锛�',
+ whetherpause:'Whether pause锛�',
+ station:'Station',
+ width:'Width',
+ widtha:'Width锛�',
+ height:'Height',
+ heighta:'Height锛�',
+ operate:'Operate',
+ add:'Increase',
+ delete:'Delete',
+ addglass:'Add glass',
+ selectwidth:'Please select width',
+ selectheight:'Please select high',
+ selectcoatingtypes:'Please select the coating types',
+ selectthickness:'Please select thickness',
+ selectquantity:'Please enter the quantity',
+ pause:'The height of the second and fourth rows must be greater than 2700 in order to save锛�',
+ pausea:'Please confirm the ready status of marking machine and cutting machine锛�',
+ infonull:'Project number cannot be empty锛�',
+ updatanull:'This project has not been saved to the loading list锛�',
+ glassnull:'An error occurred while updating the glass status',
+ deletemessage:'Do you want to delete this message?',
+ layoutSequence:'Serial Number',
},
sorter:{
- gridnumber:'携褔械械泻 褋械褌泻谢邪',
- glassnumber:'袧芯屑械褉 褋褌邪泻谢邪',
- width:'楔懈褉懈薪邪',
- height:'袙褘褋芯褌邪',
- startstatus:'小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈',
- disable:'袨褌泻谢褞褔',
- start:'袧邪褔邪谢芯',
- deficiencieste:'袧械写芯褋褌邪褌泻懈 胁 芯褌褔械褌薪芯褋褌懈',
- operate:'袨锌械褉邪褑懈褟',
- prompt:'袩芯写褋泻邪蟹泻',
- information:'小谢械写褍械褌 谢懈 褋芯芯斜褖邪褌褜 薪械写芯褋褌邪褞褖褍褞 懈薪褎芯褉屑邪褑懈褞锛�',
- yes:'袛邪',
- cancel:'袨褌屑械薪邪',
+ gridnumber:'Grid number',
+ glassnumber:'Glass number',
+ width:'Width',
+ height:'Height',
+ startstatus:'Start status',
+ disable:'Disabled',
+ start:'Enabled',
+ deficiencieste:'Report deficiencies',
+ updown:'Artificial filming',
+ operate:'Operate',
+ prompt:'Prompt',
+ information:'Is the missing information reported锛�',
+ infor:'Whether to manually download this information锛�',
+ yes:'Yes',
+ cancel:'Cancel',
},
order:{
- dilapidation:'袩芯胁褉械卸写械薪懈械',
- Takeaway:'袙蟹褟褌褜 胁褉褍褔薪褍褞',
+ dilapidation:'Breakage',
+ takeaway:'Manual removal',
+ takeon:'The arrangement is complete',
},
-
searchOrder:{
- cageinformation:'袠薪褎芯褉屑邪褑懈褟 斜褍褎械褉邪',
- productionqueue:'袩褉芯懈蟹胁芯写褋褌胁械薪薪邪褟 芯褔械褉械写褜',
- outputglassID:'袙褘褏芯写薪芯械 褋褌械泻谢芯 ID',
- startposition:'袟邪薪褟褌褜 锌芯蟹懈褑懈懈',
- targetlocation:'袩芯蟹懈褑懈褟 褑械谢懈',
- trips:'鈩� 锌芯械蟹写邪',
- number:'小械褉懈泄薪 薪芯屑械褉',
- taskstatus:'小芯褋褌芯褟薪懈械 蟹邪写邪褔懈',
- filmenter:'袨卸懈写邪薪懈械 褋褌械泻谢褟薪薪芯泄 胁褏芯写',
- infilm:'袙 薪邪褋褌芯褟褖械械 胁褉械屑褟',
- endtask:'袟邪写邪褔邪 薪邪 泻芯薪械褑',
- completetask:'袙褘锌芯谢薪械薪懈械 蟹邪写邪薪懈褟',
- intoglassid:'袙褏芯写薪芯泄 褋褌械泻谢褟薪薪褘泄 ID',
- line:'袥懈薪懈褟',
- Usage:'小泻芯褉芯褋褌褜 懈褋锌芯谢褜蟹芯胁邪薪懈褟',
- free:'袘械褋锌谢邪褌薪芯 (褟褔械械泻)',
- addcage:'袛芯斜邪胁懈褌褜 懈薪褎芯褉屑邪褑懈褞 芯 斜褍褎械褉械',
- glassIDa:'小褌械泻谢褟薪薪褘泄 ID锛�',
- glassID:'小褌械泻谢褟薪薪褘泄 ID',
- inglassID:'袙胁械写懈褌械 褋褌械泻谢芯 ID',
- pieceingrid:'袩芯褉褟写芯泻 褉邪褋锌芯谢芯卸械薪懈褟 屑邪谢械薪褜泻懈褏 褋褌械泻谢褟薪薪褘褏 锌谢邪褋褌懈薪 胁 泻谢械褌泻械',
- pieceingrida:'袩芯褉褟写芯泻 褉邪褋锌芯谢芯卸械薪懈褟 屑邪谢械薪褜泻懈褏 褋褌械泻谢褟薪薪褘褏 锌谢邪褋褌懈薪 胁 泻谢械褌泻械锛�',
- inpieceingrid:'袙胁械写懈褌械 锌芯褉褟写芯泻 褉邪褋锌芯谢芯卸械薪懈褟 褋褌械泻谢褟薪薪褘褏 谢懈褋褌芯胁 胁 褟褔械械泻械',
- cardnumber:'袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪',
- cardnumbera:'袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪锛�',
- incardnumber:'袙胁械写懈褌械 薪芯屑械褉 锌褉芯褑械褋褋邪 .',
- typeglass:'孝懈锌 褋褌械泻谢邪',
- typeglassa:'孝懈锌 褋褌械泻谢邪锛�',
- intypeglass:'袙胁械写懈褌械 褌懈锌 褋褌械泻谢邪',
- coatingtypes:'孝懈锌褘 锌芯泻褉褘褌懈泄',
- width:'楔懈褉懈薪邪',
- widtha:'楔懈褉懈薪邪锛�',
- inwidth:'袙胁械写懈褌械 褕懈褉懈薪褍',
- height:'袙褘褋芯褌邪',
- heighta:'袙褘褋芯褌邪锛�',
- inheight:'袙胁械写懈褌械 胁褘褋芯褌褍',
- thickness:'孝芯谢褖懈薪邪',
- thicknessa:'孝芯谢褖懈薪邪锛�',
- inthickness:'袙胁械写懈褌械 褌芯谢褖懈薪褍.',
- layoutID:'效械褉褌械卸 ID 蟹邪谐褉褍蟹泻懈 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈',
- layoutIDa:'效械褉褌械卸 ID 蟹邪谐褉褍蟹泻懈 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈锛�',
- inlayoutID:'袙胁械写懈褌械 褔械褉褌械卸 蟹邪泻邪谢泻懈 ID',
- picturesequence:'效械褉褌械卸 褋械褉懈泄薪 薪芯屑械褉 蟹邪谐褉褍蟹泻懈 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈',
- picturesequencea:'效械褉褌械卸 褋械褉懈泄薪 薪芯屑械褉 蟹邪谐褉褍蟹泻懈 锌械褔懈 写谢褟 蟹邪泻邪谢泻懈锛�',
- inpicturesequence:'袙胁械写懈褌械 锌芯褉褟写芯泻 褔械褉褌械卸懈 蟹邪泻邪谢泻懈 褋褌械泻谢邪.',
- startstatus:'小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈',
- startstatusa:'小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈锛�',
- instartstatus:'袙胁械写懈褌械 褋芯褋褌芯褟薪懈械 邪泻褌懈胁邪褑懈懈',
- glassgaps:'小褌械泻谢褟薪薪褘泄 蟹邪蟹芯褉',
- glassgapsa:'小褌械泻谢褟薪薪褘泄 蟹邪蟹芯褉锛�',
- inglassgaps:'袙胁械写懈褌械 褋褌械泻谢芯 蟹邪蟹芯褉',
- sure:'锌芯写褌胁械褉写',
- cancel:'袨褌屑械薪邪',
- glassID:'小褌械泻谢褟薪薪褘泄 ID',
- operate:'袨锌械褉邪褑懈褟',
- breakage:'袩芯胁褉械卸写械薪懈械',
- delete:'校写邪谢',
- outfilm:'袙褘锌褍褋泻 褋褌械泻谢邪',
- cagetableID:'ID 斜褍褎械褉薪芯泄 褌邪斜谢懈褑褘',
- cagenumber:'袘褍褎械褉 薪芯屑械褉邪',
- gridnumber:'携褔械械泻 褋械褌泻谢邪',
- enable:'袧邪褔邪谢芯',
- disable:'袨褌泻谢褞褔',
- remainingwidth:'袨褋褌邪褌芯褔薪邪褟 褕懈褉懈薪邪',
- add:'袛芯斜邪胁谢褟',
- sheetID:'袟邪泻邪谢泻邪 屑邪谢械薪褜泻懈泄 褋褌械泻谢褟薪薪褘泄 ID 褌邪斜谢懈褑褘 懈薪褎芯褉屑邪褑懈懈',
- processcards:'袣邪褉褌芯褔泻邪 锌褉芯褑械褋褋邪',
- processcardtype:'孝懈锌 褋褌械泻谢邪 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪',
- acceptshorizontal:'校屑械褉械薪薪芯械 锌褉懈薪褟褌懈械 谐芯褉懈蟹芯薪褌邪谢懈',
- xcoordinates:'X-泻芯芯褉写懈薪邪褌褘',
- ycoordinates:'Y-泻芯芯褉写懈薪邪褌褘',
- rotationangle:'校谐芯谢 胁褉邪褖械薪懈褟 (锌褉芯褌懈胁 褔邪褋芯胁芯泄 褋褌褉械谢泻懈)',
- state:'小芯褋褌芯褟薪懈械',
- takeout:'袙蟹褟褌褜',
- deletemessage:'校写邪谢懈褌褜 褝褌褍 懈薪褎芯褉屑邪褑懈褞 懈谢懈 薪械褌?',
- prompt:'袩芯写褋泻邪蟹泻',
- yes:'袛邪',
- accept:'袩褉懈薪褟褌褜',
- noaccept:'袧械 锌褉懈薪懈屑邪褌褜',
- filmcomplete:'小褌械泻谢芯 谐芯褌芯胁芯',
- waiting:'袞写械屑.',
- },
- workOrder:{
- glassID: 'Glass ID',
- height: 'Height',
- width: 'Width',
- thickness: 'Thickness',
- coatingtypes: 'Coating types',
- productionsequence: 'Production sequence',
- cardnumber: 'Process card number',
- operate: 'Operate',
- messagedamaged: 'Is this information damaged?',
- prompt: 'Prompt',
- yes: 'Yes',
- cancel: 'Cancel',
- takemessage: 'Do you need to delete the message锛�',
- breakage: 'Breakage',
- takeout: 'Take away',
- glasstype: 'Glass type',
- line: 'Wire',
- status: 'Status',
- },
- processCard: {
- intofurnace: 'Entering the furnace',
- beforefurnace: 'Before entering the furnace',
- outfurnace: 'Glass finished from tempering furnace',
- print: 'Take away the print',
- printing: 'print',
- projectnumber: 'Please enter the project number',
- inquire: 'Inquire',
- project: 'Project number',
- awayprocess: 'Take away the process',
- awayequipment: 'Take away the equipment',
- awayteam: 'Take away the crew',
- flowcard: 'Process card',
- layer: 'Layer number',
- temperinglayout: 'Heat number',
- temperingfeed: 'Preface',
- width: 'Width',
- height: 'Height',
- thickness: 'Thickness',
- glasstakeout: 'Glass take away list',
- layoutID: 'Drawing ID of loading for tempering furnace',
- glassID: 'Glass ID',
- },
- reportWork:{
- lowerbit:'小褌邪薪褑懈褟 褉邪蟹谐褉褍蟹泻懈',
- shelfnumber:'袧芯屑械褉 褋褌芯泄泻懈 褉械谐懈褋褌褉邪褑懈懈',
- cardnumber:'袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪',
- totalquantity:'袨斜褖械械 泻芯谢懈褔械褋褌胁芯',
- beendropped:'袣芯谢懈褔械褋褌胁芯 褋褌械泻谢邪 褉邪蟹谐褉褍蟹泻懈',
- state:'小芯褋褌芯褟薪懈械',
- devicenumber:'袧芯屑械褉 芯斜芯褉褍写芯胁邪薪懈褟.',
- startstatus:'小褌邪褌褍褋 薪邪褔邪谢邪 芯锌械褉邪褑懈懈',
- enable:'袧邪褔邪谢芯',
- unenable:'袧械 薪邪褔邪褌',
- operate:'袨锌械褉邪褑懈褟',
- bindingshelves:'袧邪蟹薪邪褔械薪薪邪褟 褋褌械谢谢邪卸泻邪',
- clear:'效懈褋褌芯.',
- workstation:'小褌邪薪褑懈褟 薪芯屑械褉',
- shelfnumber:'袧芯屑械褉 褋褌芯泄泻懈 褉械谐懈褋褌褉邪褑懈懈锛�',
- cardnumbera:'袧芯屑械褉 泻邪褉褌芯褔泻懈 锌褉芯褑械褋褋邪锛�',
- incardnumber:'袩芯卸邪谢褍泄褋褌邪, 胁褘斜械褉懈褌械 薪芯屑械褉 锌褉芯谐褉邪屑屑褘',
- clearglass:'袨褔懈褋褌懈褌褜 褋褌械泻谢芯 褋 锌芯谢泻懈',
- sure:'锌芯写褌胁械褉写',
- cancel:'袨褌屑械薪邪',
- glassinformation:'袠薪褎芯褉屑邪褑懈褟 褋褌械泻谢邪',
- glassID:'小褌械泻谢褟薪薪褘泄 ID',
- coatingtypes:'孝懈锌褘 锌芯泻褉褘褌懈泄',
- thickness:'孝芯谢褖懈薪邪',
- width:'楔懈褉懈薪邪',
- height:'袙褘褋芯褌邪',
- },
-
- productStock: {
- addusers: 'Add user',
- username: 'User name',
- usernamea: 'User name锛�',
- inusername: 'Enter one user name',
- role: 'Role',
- rolea: 'Role锛�',
- inrole: 'Please select a role',
- test: 'Test',
- admin: 'Administrator',
- operate: 'Operate',
- resetpassword: 'Reset password',
- exit: 'Edit',
- delete: 'Delete',
- prompt: 'Prompt',
- repassword: 'Do you want to reset the user password锛�',
- yes: 'Yes',
- cancel: 'Cancel',
- reusername: 'Modify Users',
- addusername: 'Add user',
- password: 'Password锛�',
- sure: 'Confirm',
- inpassword: 'Please input a password',
- deusername: 'Do you want to delete the user锛�',
- },
- customer: {
- addmenua: 'Add secondary menus',
- addmenu: 'Add a first-level menu',
- firstmenu: 'First level menu bar',
- firstmenuname: 'The name of the first-level menu:',
- link: 'Link',
- inlink: 'Please enter the link',
- linka: 'Link锛�',
- sort: 'Sort',
- insort: 'Please enter sorting',
- sorta: 'Sort锛�',
- operate: 'Operate',
- exit: 'Edit',
- delete: 'Delete',
- semenu: 'Secondary menu bar',
- semenuname: 'Secondary menu name:',
- menu: 'Menu bar锛�',
- inmenu: 'Please enter a menu name',
- sure: 'Confirm',
- cancel: 'Cancel',
- exmene: 'Modify the first-level menu',
- exmenea: 'Modify the secondary menu',
- yes: 'Yes',
- demenu: 'Do you want to delete this menu锛�',
- prompt: 'Prompt',
- },
- delivery: {
- addrole: 'Add Role',
- editrole: 'Modify role',
- role: 'Role',
- rolea: 'Role锛�',
- inrole: 'Please enter the role',
- operate: 'Operate',
- edit: 'Edit',
- delete: 'Delete',
- yes: 'Yes',
- sure: 'Confirm',
- cancel: 'Cancel',
- derole: 'Do you want to delete this role',
- prompt: 'Prompt',
- choice: 'Menu permissions锛�',
- inchoice: 'Please select Menu Permissions',
- },
- replenish: {
- patchManagement: 'Mesh management',
-
- },
- rework: {
- reworkManagement: 'Rework management',
- addRework: "Rework added ",
- },
-
-
- role: {
- id: 'ID',
- characterHomepage: 'Character Home',
- },
- user: {
- userId: 'User ID',
- userHomepage: 'User Home',
- },
- orderBasicData: {
- order: 'orders',
- orderType: 'The type of order',
- },
- machine: {
- basicId: 'Device number',
- basicName: 'The name of the device',
- basicCategory: 'The process in which it is located',
- tempering: 'Steel',
- },
- report: {
- productionReport: 'Production reports',
- workInProgressReport: 'WIP report',
- },
- productionBasicData: {
- basicDataQuery: 'Basic data query',
- },
- mainIngredient: {
- materialInformation: 'Material information',
- },
- mainIngredientStock: {
- materialName: 'The name of the item',
- createTime: 'Return date',
- },
- large: {
- time: 'The time of the break',
- number: 'Order number',
- jobnumber: 'Job number',
- productionnumber: 'The production order number',
- cardnumber: 'Process card number',
- projectname: 'The name of the project',
- batch: 'batch',
- detailID: 'Detail ID',
- building: 'Building No',
- serialnumber: 'Order serial number',
- productname: 'Product name',
- serial: 'Process validation number',
- slicemarker: 'Frame marker (position)',
- numberpatches: 'Number of patches',
- width: 'Width',
- height: 'Height',
- shape: 'Shape',
- responsibleprocess: 'Responsible process',
- process: 'This process',
- numberfractions: 'The number of unfilled fractions',
- breakreason: 'The reason for the break',
- breaktype: 'Sub-break type',
- responsiblepersonnel: 'Responsible Personnel',
- responsiblequipment: 'Responsible Equipment',
- responsibleteam: 'Responsible team',
- area: 'Sub-broken area',
- inspector: 'Quality inspector',
- operate: 'Operate',
- mes: 'Detail',
- projectnumber: 'The project order number',
- brokeno: 'The report is broken and not filled',
- close: 'Shut down',
- orderId: 'Order ID',
- customerName: 'The name of the customer',
- project: 'The name of the project',
- are: 'are',
- quantity: 'quantity',
- warehousing: 'State',
- deliveryDate: 'Delivery time',
- notstocked: 'Not yet in stock',
- inboundstatus: 'Partial inventory status',
- allstatus: 'All in stock status',
- completedquantity: 'Completed quantity',
- scrapquantity: 'Scrap Quantity',
- method: 'Processing method',
- innumber: 'Quantity already entered',
- productstatus: 'Production status',
- right: 'normal',
- stop: 'termination',
- inquire: 'query',
- starttime: 'Start Time',
- endtime: 'End Time',
- loading: 'In the process of uploading锛�',
- },
- reportmanage: {
- productiontime: 'production time',
- starttime: 'Start Time',
- endtime: 'End Time',
- ctype: 'Please select type',
- cstate: 'Please select the status',
- cprocess: 'Please select the process',
- all: 'All',
- completed: 'Completed',
- broke: 'Damaged',
- takeout: 'Takeout',
- dreportwork: 'Unreported work',
- pendingwork: 'Pending job application',
- reportwork: 'Reported work',
- incise: 'slicing',
- edging: 'edging',
- steel: 'toughened',
- inquire: 'query',
- signingwork: 'Reporting for work',
- reporteam: 'Report work team',
- reportingequipment: 'Reporting equipment',
- line: 'line',
- process: 'production processes',
- glassID: 'Glass ID',
- projectnumber: 'Project number',
- layoutID: 'Tempered layout ID',
- type: 'type',
- state: 'state',
- processcards: 'Flow Card',
- number: 'Serial Number',
- layer: 'storey',
- typebreakage: 'Damage type',
- ptypebreakage: ' Please select the type of damage',
- causebreakage: 'Reason for damage',
- pcausebreakage: 'Please select the reason for the damage',
- responsibleprocess: 'Responsibility Process',
- responsiblepersonnel: 'Responsible personnel',
- presponsiblepersonnel: 'Please enter the responsible personnel',
- responsibleteam: 'Responsible team',
- presponsibleteam: 'Please select the responsible team',
- responsibleequipment: 'Responsible equipment',
- presponsibleequipment: 'Please select the responsible device',
- remark: 'notes',
- premark: 'Please enter a note',
- },
- film: {
- mes: 'Original film storage details',
- warehousing: 'store',
- operate: 'Operate',
- exit: 'Edit',
- delete: 'Delete',
- outbound: 'Outbound',
- deviceid: 'device ID',
- slot: 'Grid number',
- enablestatea: 'Enable tagging',
- disable: 'Disable',
- start: 'Enable',
- startslot: 'Start workstation',
- endslot: 'Target workstation',
- slotid: 'Grid ID',
- width: 'Width',
- widtha: 'Width锛�',
- inwidth: 'Please enter width',
- height: 'Height',
- inheight: 'Please enter height',
- heighta: 'Height锛�',
- thickness: 'Thickness',
- inthickness: 'Please enter thickness',
- thicknessa: 'Thickness锛�',
- films: 'Films',
- infilms: 'Please enter films',
- filmsa: 'Films锛�',
- createtime: 'Creation time',
- remainquantity: 'Remaining Quantity',
- thickremainquantity: 'Remaining quantity of original film (sheets)锛�',
- inquantity: 'Please enter the quantity',
- quantitya: 'Number锛�',
- enableid: 'Task ID',
- originateslot: 'Starting grid',
- patternquantity: 'Number',
- enabletype: 'Task Type',
- enablestate: 'Workstation status',
- finish: 'Completed',
- unfinish: 'Incomplete',
- dedelete: 'Do you want to delete this content锛�',
- dedisable: 'Do you want to disable this content锛�',
- deoutbound: 'Whether to release the content of this item from the warehouse锛�',
- selectwarehousing: 'Please select the lifting position',
- inwarehousing: 'Lifting position锛�',
- warehousing1: 'Lifting position 1',
- warehousing2: 'Lifting position 2',
- starttime: 'Start Time',
- endtime: 'End Time',
- taskstatus: 'Status',
- built: 'newly built',
- execution: 'In progress',
- tasktype: 'Task Type',
- stocke: 'store',
- dispatch: 'dispatch',
- inquire: 'query',
- station: 'station',
- },
- Mounting: {
- previewproject: 'Select Preview Project',
- loadinglinea: 'Upper film line',
- loadingline: 'Upper film line锛�',
- inloadingline: 'Please select the upper film line',
- oneloadingline: 'Line 1 on film',
- twoloadingline: 'Line 2 on film',
- waiting: 'Waiting',
- setparameters: 'Set parameters',
- project: 'Project number',
- projecta: 'Project number锛�',
- width: 'Width',
- height: 'Height',
- thickness: 'Thickness',
- projectnumber: 'Project original piece number',
- state: 'state',
- createtime: 'Creation time',
- all: 'Select All',
-
- }
-}
\ No newline at end of file
+ searchlayout:'Non-tempered process card inquiry',
+ fullfurnaces:'Number of full furnaces',
+ specifiedproject:'The currently specified project',
+ undesignate:'Undesignate',
+ allnumber:'Total quantity',
+ numbercages:'Number of cages',
+ missingquantity:'Missing quantity',
+ breakquantity:'Breakage/Take Away quantity',
+ ceng:'layer',
+ cageinformation:'Sorter information',
+ productionqueue:'Production queue',
+ outputglassID:'Output glass ID',
+ startposition:'Start position',
+ targetlocation:'Target Position',
+ trips:'Train number',
+ number:'Serial Number',
+ taskstatus:'Task state',
+ filmenter:'Waiting for input glass',
+ infilm:'In progress',
+ endtask:'End task',
+ completetask:'Complete the task',
+ intoglassid:'Input glass ID',
+ line:'Wire',
+ Usage:'Usage rate',
+ free:'Free(pieces)',
+ addcage:'Add information on sorter',
+ glassIDa:'Glass ID锛�',
+ glassID:'Glass ID',
+ inglassID:'Please enter the glass ID',
+ pieceingrid:'The order of small pieces within the grid',
+ pieceingrida:'The order of small pieces within the grid锛�',
+ inpieceingrid:'Please enter the order of small pieces within the grid',
+ cardnumber:'Process card number',
+ cardnumbera:'Process card number锛�',
+ incardnumber:'Please enter the process card number',
+ typeglass:'Glass type',
+ typeglassa:'Glass type锛�',
+ intypeglass:'Please enter the glass type',
+ width:'Width',
+ widtha:'Width锛�',
+ inwidth:'Please enter width',
+ height:'Height',
+ heighta:'Height锛�',
+ inheight:'Please enter height',
+ coatingtypes:'Coating types',
+ thickness:'Thickness',
+ thicknessa:'Thickness锛�',
+ inthickness:'Please enter the thickness',
+ layoutID:'Drawing ID of loading for tempering furnace',
+ layoutIDa:'Drawing ID of loading for tempering furnace锛�',
+ inlayoutID:'Please enter the drawing ID of loading for tempering furnace',
+ picturesequence:'Drawing sequence of loading for tempering furnace',
+ picturesequencea:'Drawing sequence of loading for tempering furnace锛�',
+ inpicturesequence:'Please enter the drawing sequence of loading for tempering furnace',
+ startstatus:'Start status',
+ startstatusa:'Start status锛�',
+ instartstatus:'Please enter the enabled status',
+ glassgaps:'Glass gap',
+ glassgapsa:'Glass gap锛�',
+ inglassgaps:'Please enter the glass gap',
+ sure:'Confirm',
+ cancel:'Cancel',
+ operate:'Operate',
+ breakage:'Breakage',
+ delete:'Delete',
+ outfilm:'Output glass',
+ cagetableID:'Sorter table ID',
+ cagenumber:'Sorter number',
+ gridnumber:'Grid number',
+ gridnumbera:'Grid number锛�',
+ grid:'Please enter a grid number',
+ enable:'Enabled',
+ disable:'Disabled',
+ remainingwidth:'Remaining width',
+ add:'Add',
+ sheetID:'Tempered small piece information table ID',
+ processcards:'Process card',
+ processcardtype:'Process card glass type',
+ acceptshorizontal:'Does tempering accept horizontal placement',
+ xcoordinates:'x coordinate',
+ ycoordinates:'Y coordinate',
+ rotationangle:'Rotation angle (counterclockwise)',
+ state:'Status',
+ takeout:'Take away',
+ deletemessage:'Do you want to delete this message?',
+ prompt:'Prompt',
+ yes:'Yes',
+ accept:'Accept',
+ noaccept:'Not accept',
+ filmcomplete:'Glass output completed',
+ waiting:'Waiting',
+ broke:'Is this information damaged锛�',
+ brokeb:'Do you need to delete the message锛�',
+ outfil:'Whether the film is released or not锛�',
+ inputid:'Please enter the glass ID',
+ search:'Search',
+ tabid:'Dali film cage details table ID',
+ tid:'Device ID',
+ tida:'Device ID锛�',
+ fin:'Whether or not the task was completed锛�',
+ sureadd:'Confirm the addition',
+ sureadda:'Whether to confirm the addition锛�',
+ zailong:'In a cage',
+ rengongxp:'Artificial filming',
+ up:'Previous',
+ down:'Next',
+ now:'The current page is displayed',
+ tit:'data',
+ temperingqueries:'Tempering queries',
+ specifytempering:'Specify a furnace',
+ specifyengineerid:'Specify the project',
+ projectnumber:'Project number',
+ layoutnumber:'Drawing number of loading for tempering furnace',
+ numberglasses:'Number of glasses',
+ specifytemperinga:'Whether to specify the tempering of this information锛�',
+ temperedswitch:'Tempered switch',
+ dutyinformation:'Duty information',
+ process:'Process',
+ team:'Team',
+ basic:'equipment',
+ makesure:'Confirm the save',
+ // cancel:'鍙栨秷',
+ temperingtotal:'Number of tempering furnaces锛�',
+ glasstotal:'Total number of glasses锛�',
+ },
+ workOrder:{
+ glassID:'Glass ID',
+ height:'Height',
+ width:'Width',
+ thickness:'Thickness',
+ coatingtypes:'Coating types',
+ productionsequence:'Production sequence',
+ cardnumber:'Process card number',
+ operate:'Operate',
+ messagedamaged:'Is this information damaged?',
+ prompt:'Prompt',
+ yes:'Yes',
+ cancel:'Cancel',
+ takemessage:'Do you need to delete the message锛�',
+ breakage:'Breakage',
+ takeout:'Take away',
+ glasstype:'Glass type',
+ line:'Wire',
+ status:'Status',
+ time:'Time period',
+ cway:'Please select a route',
+ cstate:'Please select a status',
+ edgingone:'Edging a line',
+ edgingtwo:'Edging two lines',
+ nedging:'Unedging',
+ edging:'Edging',
+ finedging:'has been edging',
+ },
+ processCard:{
+ intofurnace:'Entering the furnace',
+ beforefurnace:'Before entering the furnace',
+ outfurnace:'Glass finished from tempering furnace',
+ print:'Take away the print',
+ printing:'print',
+ projectnumber:'Please enter the project number',
+ inquire:'Inquire',
+ project:'Project number',
+ awayprocess:'Take away the process',
+ awayequipment:'Take away the equipment',
+ awayteam:'Take away the crew',
+ flowcard:'Process card',
+ layer:'Layer number',
+ temperinglayout:'Heat number',
+ temperingfeed:'Preface',
+ width:'Width',
+ height:'Height',
+ thickness:'Thickness',
+ glasstakeout:'Glass take away list',
+ layoutID:'Drawing ID of loading for tempering furnace',
+ glassID:'Glass ID',
+ },
+ reportWork:{
+ details:'Drop off details',
+ filming:'Artificial filming',
+ printing:'Automatic printing',
+ cenumber:'Number of layers',
+ artificialorder:'The number of pieces under artificial order',
+ processcard:'Print the process card',
+ printlabels:'Print labels',
+ information:'Landing information',
+ cstation:'Please select a desk',
+ all:'all',
+ timeperiod:'Time period',
+ stationnumber:'Station number',
+ order:'order',
+ filminformation:'Manual film information',
+ glassmation:'Artificial film current glass information',
+ barcodescanner:'The current glass information of the barcode scanner',
+ lowerbit:'Unloading station',
+ shelfnumber:'Rack number',
+ cardnumber:'Process card number',
+ totalquantity:'Total quantity',
+ beendropped:'Quantity of unloaded glass',
+ state:'Status',
+ devicenumber:'Equipment No.',
+ startstatus:'Start status',
+ enable:'Start',
+ unenable:'Unstart',
+ operate:'Operate',
+ bindingshelves:'Assigned rack',
+ clear:'Clear',
+ workstation:'Station No.',
+ shelfnumbera:'Rack number锛�',
+ cardnumbera:'Process card number锛�',
+ incardnumber:'Please select the process card number',
+ clearglass:'Clear the glass on the shelf',
+ sure:'Operate',
+ cancel:'Cancel',
+ glassinformation:'Glass information',
+ glassID:'Glass ID',
+ coatingtypes:'Coating types',
+ thickness:'Thickness',
+ width:'Width',
+ height:'Height',
+ },
+
+ productStock:{
+ addusers:'Add user',
+ username:'User name',
+ usernamea:'User name锛�',
+ inusername:'Enter one user name',
+ role:'Role',
+ rolea:'Role锛�',
+ inrole:'Please select a role',
+ test:'Test',
+ admin:'Administrator',
+ operate:'Operate',
+ resetpassword:'Reset password',
+ exit:'Edit',
+ delete:'Delete',
+ prompt:'Prompt',
+ repassword:'Do you want to reset the user password锛�',
+ yes:'Yes',
+ cancel:'Cancel',
+ reusername:'Modify Users',
+ addusername:'Add user',
+ password:'Password锛�',
+ sure:'Confirm',
+ inpassword:'Please input a password',
+ deusername:'Do you want to delete the user锛�',
+ },
+ customer:{
+ addmenua:'Add secondary menus',
+ addmenu:'Add a first-level menu',
+ firstmenu:'First level menu bar',
+ firstmenuname:'The name of the first-level menu:',
+ link:'Link',
+ inlink:'Please enter the link',
+ linka:'Link锛�',
+ sort:'Sort',
+ insort:'Please enter sorting',
+ sorta:'Sort锛�',
+ operate:'Operate',
+ exit:'Edit',
+ delete:'Delete',
+ semenu:'Secondary menu bar',
+ semenuname:'Secondary menu name:',
+ menu:'Menu bar锛�',
+ inmenu:'Please enter a menu name',
+ sure:'Confirm',
+ cancel:'Cancel',
+ exmene:'Modify the first-level menu',
+ exmenea:'Modify the secondary menu',
+ yes:'Yes',
+ demenu:'Do you want to delete this menu锛�',
+ prompt:'Prompt',
+ },
+ delivery:{
+ addrole:'Add Role',
+ editrole:'Modify role',
+ role :'Role',
+ rolea :'Role锛�',
+ inrole :'Please enter the role',
+ operate :'Operate',
+ edit :'Edit',
+ delete :'Delete',
+ yes:'Yes',
+ sure :'Confirm',
+ cancel :'Cancel',
+ derole :'Do you want to delete this role',
+ prompt:'Prompt',
+ choice:'Menu permissions锛�',
+ inchoice:'Please select Menu Permissions',
+ },
+ replenish:{
+ patchManagement:'Mesh management',
+
+ },
+ rework:{
+ reworkManagement:'Rework management',
+ addRework:"Rework added ",
+ },
+
+
+ role:{
+ id:'ID',
+ characterHomepage:'Character Home',
+ },
+ user:{
+ userId:'User ID',
+ userHomepage:'User Home',
+ },
+ orderBasicData:{
+ order:'orders',
+ orderType:'The type of order',
+ },
+ machine:{
+ basicId:'Device number',
+ basicName:'The name of the device',
+ basicCategory:'The process in which it is located',
+ tempering:'Steel',
+ },
+ report:{
+ productionReport:'Production reports',
+ workInProgressReport:'WIP report',
+ },
+ productionBasicData:{
+ basicDataQuery :'Basic data query',
+ },
+ mainIngredient:{
+ materialInformation :'Material information',
+ },
+ mainIngredientStock:{
+ materialName :'The name of the item',
+ createTime :'Return date',
+ },
+ large:{
+ time: 'The time of the break',
+ number: 'Order number',
+ jobnumber: 'Job number',
+ productionnumber: 'The production order number',
+ cardnumber: 'Process card number',
+ projectname: 'The name of the project',
+ batch: 'batch',
+ detailID: 'Detail ID',
+ building: 'Building No',
+ serialnumber: 'Order serial number',
+ productname: 'Product name',
+ serial: 'Process validation number',
+ slicemarker: 'Frame marker (position)',
+ numberpatches: 'Number of patches',
+ width: 'Width',
+ height: 'Height',
+ shape: 'Shape',
+ responsibleprocess: 'Responsible process',
+ process: 'This process',
+ numberfractions: 'The number of unfilled fractions',
+ breakreason: 'The reason for the break',
+ breaktype: 'Sub-break type',
+ responsiblepersonnel: 'Responsible Personnel',
+ responsiblequipment: 'Responsible Equipment',
+ responsibleteam: 'Responsible team',
+ area: 'Sub-broken area',
+ inspector: 'Quality inspector',
+ operate: 'Operate',
+ mes: 'Detail',
+ projectnumber: 'The project order number',
+ brokeno: 'The report is broken and not filled',
+ close: 'Shut down',
+ orderId: 'Order ID',
+ customerName: 'The name of the customer',
+ project: 'The name of the project',
+ are: 'are',
+ quantity: 'quantity',
+ warehousing: 'State',
+ deliveryDate: 'Delivery time',
+ notstocked: 'Not yet in stock',
+ inboundstatus: 'Partial inventory status',
+ allstatus: 'All in stock status',
+ completedquantity: 'Completed quantity',
+ scrapquantity: 'Scrap Quantity',
+ method: 'Processing method',
+ innumber: 'Quantity already entered',
+ productstatus: 'Production status',
+ right: 'normal',
+ stop: 'termination',
+ inquire: 'query',
+ starttime :'Start Time',
+ endtime :'End Time',
+ loading :'In the process of uploading锛�',
+ },
+ reportmanage:{
+ productiontime :'production time',
+ starttime :'Start Time',
+ endtime :'End Time',
+ ctype :'Please select type',
+ cstate :'Please select the status',
+ cprocess :'Please select the process',
+ all :'All',
+ completed :'Completed',
+ broke :'Damaged',
+ takeout :'Takeout',
+ dreportwork :'Unreported work',
+ pendingwork :'Pending job application',
+ reportwork :'Reported work',
+ incise :'slicing',
+ edging :'edging',
+ steel :'toughened',
+ inquire :'query',
+ signingwork :'Reporting for work',
+ reporteam :'Report work team',
+ reportingequipment :'Reporting equipment',
+ line :'line',
+ process :'production processes',
+ glassID :'Glass ID',
+ projectnumber :'Project number',
+ layoutID :'Tempered layout ID',
+ type :'type',
+ state :'state',
+ processcards :'Flow Card',
+ number :'Serial Number',
+ layer :'storey',
+ typebreakage :'Damage type',
+ ptypebreakage :' Please select the type of damage',
+ causebreakage :'Reason for damage',
+ pcausebreakage :'Please select the reason for the damage',
+ responsibleprocess :'Responsibility Process',
+ responsiblepersonnel :'Responsible personnel',
+ presponsiblepersonnel :'Please enter the responsible personnel',
+ responsibleteam :'Responsible team',
+ presponsibleteam :'Please select the responsible team',
+ responsibleequipment :'Responsible equipment',
+ presponsibleequipment :'Please select the responsible device',
+ remark :'notes',
+ premark :'Please enter a note',
+ },
+ film:{
+ mes:'Original film storage details',
+ warehousing:'store',
+ operate: 'Operate',
+ exit:'Edit',
+ delete:'Delete',
+ outbound:'Outbound',
+ deviceid:'device ID',
+ slot:'Grid number',
+ enablestatea:'Enable tagging',
+ disable:'Disable',
+ start:'Enable',
+ startslot:'Start workstation',
+ endslot:'Target workstation',
+ slotid:'Grid ID',
+ width:'Width',
+ widtha:'Width锛�',
+ inwidth:'Please enter width',
+ height:'Height',
+ inheight:'Please enter height',
+ heighta:'Height锛�',
+ thickness:'Thickness',
+ inthickness:'Please enter thickness',
+ thicknessa:'Thickness锛�',
+ films:'Films',
+ infilms:'Please enter films',
+ filmsa:'Films锛�',
+ createtime:'Creation time',
+ remainquantity:'Remaining Quantity',
+ thickremainquantity:'Remaining quantity of original film (sheets)锛�',
+ inquantity:'Please enter the quantity',
+ quantitya:'Number锛�',
+ enableid:'Task ID',
+ originateslot:'Starting grid',
+ patternquantity:'Number',
+ enabletype:'Task Type',
+ enablestate:'Workstation status',
+ finish:'Completed',
+ unfinish:'Incomplete',
+ dedelete:'Do you want to delete this content锛�',
+ dedisable:'Do you want to disable this content锛�',
+ deoutbound:'Whether to release the content of this item from the warehouse锛�',
+ selectwarehousing:'Please select the lifting position',
+ inwarehousing:'Lifting position锛�',
+ warehousing1:'Lifting position 1',
+ warehousing2:'Lifting position 2',
+ starttime :'Start Time',
+ endtime :'End Time',
+ taskstatus :'Status',
+ built :'newly built',
+ execution :'In progress',
+ tasktype :'Task Type',
+ stocke :'store',
+ dispatch :'dispatch',
+ inquire :'query',
+ station :'station',
+ },
+ Mounting:{
+ previewproject :'Select Preview Project',
+ loadinglinea :'Upper film line',
+ loadingline :'Upper film line锛�',
+ inloadingline :'Please select the upper film line',
+ oneloadingline :'Line 1 on film',
+ twoloadingline :'Line 2 on film',
+ waiting :'Waiting',
+ setparameters :'Set parameters',
+ project :'Project number',
+ projecta :'Project number锛�',
+ width :'Width',
+ height :'Height',
+ thickness :'Thickness',
+ projectnumber :'Project original piece number',
+ state :'state',
+ createtime :'Creation time',
+ all :'Select All',
+
+ }
+ }
\ No newline at end of file
--
Gitblit v1.8.0